Elektrod Basıncının Nokta Direnç Kaynaklı DP600 Çeliğinin Mikroyapı ve Sertliğine Etkileri

Yıl 2018, Cilt: 7 Sayı: 2, 194 - 205, 30.12.2018

Muhammed Elitaş Bilge Demir

https://doi.org/10.17100/nevbiltek.403814

Cited By: 1

Öz

Bu
çalışmada DP600 otomotiv sac çeliğinin sabit kaynak akımı ve sabit kaynak
süresinde, 5 farklı elektrot basıncı için nokta direnç kaynaklı birleştirmeleri
gerçekleştirilmiş, elektrod basıncının mikroyapı ve sertliğe olan etkileri
araştırılmıştır. Mikroyapı ve sertlik, malzeme özelliklerine ve başta ısı
girdisi olmak üzere kaynak parametrelerine bağlı olarak değişmektedir. Elektrod
basıncı, nokta direnç kaynak (NDK) işlemi süresince kaynak temas yüzeyi ve ısı
transferine etki etmektedir. Bu iki faktör makroyapı-mikroyapı-mekanik
özellikler ilişkisi dolayısıyla kaynak performansı üzerinde çok etkilidir.
Deneysel sonuçlar, NDK termal gradyantının tersine malzeme sertliğinin ana
metal, ITAB ve kaynak metali boyunca arttığını göstermiştir. İlave olarak NDK
baskı kuvvetinin artması ile de DP600 numunelerinin ITAB ve kaynak metalindeki
martensit hacim oranı artmış ve bu doğrultuda sertliğinde artış görülmüştür. En
büyük nugget çapı en yüksek NDK baskı kuvveti numunelerinde tespit edilmiştir.
Ayrıca, sonuçlar ve literatür karbon eşdeğeri ve soğuma hızı açısından
irdelenmiştir.

Anahtar Kelimeler

DP600, NDK, mikroyapı, sertlik

Kaynakça

• [1] Ma C., Chen D.L., Bhole S.D., Boudreau G., Lee A., Biro E., “Microstructure and fracture characteristics of spot-welded DP600 steel” Materials Science and Engineering A, 485, 334-346, 2008.
• [2] Technical Transfer Dispatch #6—Body Structure Materials, ULSAB-AVC Consortium, 2001.
• [3] Marya M., Gayden X.Q., “Development of requirements for resistance spot welding dual-phase (DP600) steels part 1-the causes of interfacial fracture” Welding Journal, 84, 172-182, 2005.
• [4] Easterling K., “Introduction to the Physical Metallurgy of Welding”, second ed., Butterworth Heinemann Ltd., Oxford, 1992.
• [5] Gould J.E., Khurana S.P., Li T., “Predictions of microstructures when welding automotive advanced high-strength steels” Welding Journal, 85, 111-116, 2006. [6] Tumuluru M. D., Great Designs in Steel Conference, T4-8, MI, 2006.
• [7] Easterling K.E., “Modeling the Weld Thermal Cycle and Transformation Behavior in the Heat Affected Zone, Mathematical Modeling of Weld Phenomena”, H. Carjack and K.E. Easterling, Ed., London, 1993.
• [8] Kou S., “Welding Metallurgy”, second ed., Wiley Inter science, New York, 2002.
• [9] Pal T.K., Bhowmick K., “Resistance spot welding characteristics and high cycle fatigue behavior of DP780 steel sheet” ASM International, 21, 280-285, 2012.
• [10] Yurioka N., Suzuki H., “Determination of necessary preheating temperature in steel welding” Welding Journal, 62(6), 147–153,1983.
• [11] Khan M.I., Kuntz M.L., Biro E., Zhou Y., “Microstructure and mechanical properties of resistance spot welded advanced high strength steels” Materials Transactions, 49(7), 1629-1637, 2008.
• [12] Uzun F., Bilge A.N., “The effect of carbon content and submerged arc welding process on hardness of carbon steels” Journal for Foundations and Applications of Physics, 4(1), 1-7, 2017.
• [13] Hayat F., Sevim İ., “The effect of welding parameters on fracture toughness of resistance spot-welded galvanized DP600 automotive steel sheets” Int J Adv Manuf Technol, 58, 1043–1050, 2012.
• [14] Hayat F., Demir B., Acarer M., Aslanlar S., “Effect of weld time and weld current on the mechanical properties of resistance spot welded IF (DIN EN 10130 1999) steel” Kovove Materialy, 47, 11-17, 2009.
• [15] Holovenko O., Lenco M.G., Pastore E., Pinasco M.R., Matteis P., Scavino G., Firrao D., “Microstructural and mechanical characterization of welded joints on innovative high-strength steels” La Metallurgia Italiana, 3, 3-12, 2013.
• [16] Williams N.T., Parker J.D., “Review of resistance spot welding of steel sheets part 1 modelling and control of weld nugget formation” International Materials Reviews, 2, 45–75, 2004.
• [17] Chien C.S., Kannatey E., Asibu J.R., “Investigation of monitoring systems for resistance spot welding” Welding Journal, 81, 195-199, 2002.
• [18] Senkara J., Zhang H., Hu S.J., “Expulsion prediction in resistance spot welding” Welding Journal, 83, 123–132, 2004. [19] Zhang H., “Expulsion and its influence on weld quality” Welding Research Supplement, 11, 373–380, 1999.
• [20] RWMA, “Resistance Welding Manual”, fourth ed., RWMA, Philadelphia, 1989. [21] Wang G., Barkey M.E., “Investigating the spot weld fatigue crack growth process using X-ray imaging” Welding Journal, 85, 84–90, 2006.
• [22] Marya M., Gayden X.Q., “Development of requirements for resistance spot welding dual-phase (DP600) steels part 1-the causes of interfacial fracture” Welding Journal, 84, 172-182, 2005.
• [23] El-Sayed M.E., Stawiarski T., Frutiger R., “Fatigue analysis of spot welded joints under variable amplitude load history” Engineering Fracture Mechanics, 55(3), 363–369, 1996.
• [24] Gould J.E., Khurana S.P., Li T., “Prediction of microstructures when welding automotive advanced high-strength steels” Welding Journal, 85, 111–116, 2006.
• [25] Gould J.E., Khurana S.P., Li T., “Prediction of microstructures when welding automotive advanced high-strength steels” Welding Journal, 85, 111–116, 2006.
• [26] Zhang H., Senkara J., “Resistance welding: fundamentals and applications” Taylor & Francis, 427s, New York, 2006.
• [27] Pouranvari M., Asgari H.R., Mosavizadch S.M., Marashi P.H., Goodarzi M., “Effect of weld nugget size on overload failure mode of resistance spot welds” Science and Technology of Welding and Joining, 12(2),17–25, 2007.
• [28] Zhang H., Wei A., Qiu X., Chen J., “Microstructure and mechanical properties of resistance spot welded dissimilar thickness DP780/DP600 dual-phase steel joints” Materials and Design, 54, 443–449, 2014.
• [29] Hayat F., Demir B., Acarer M., “Tensile shear and microstructural properties of resistance spot welded low carbon Mn-Ni dual-phase steels” Metal Science and Heat Treatment, 49, 9-10, 484-489, 2007.
• [30] Demir B., Erdogan M., “The hardenability of austenite with different alloy content and dispersion in dual phase steels” Journal of Materials Processing Technology, 208 1-3, 75-84, 2008.
• [31] Demir B., Incekar E., Dincel Ö., Elitaş M., “İleri dayanımlı çeliklerde nokta direnç kaynağı etkilerinin incelenmesi” 4th International Conference on Welding Technologies and Exhibition (ICWET’16), Gaziantep, 2016.
• [32] Xu J., Zhang Y.S., Lai X., Chen G.L., “Experimental investigation of fatigue performance of spot welded dual phase sheet steels” Science and Technology of Welding and Joining, 13(8), 726-731, 2008.
• [33] Long X., Khanna S.K., “Fatigue properties and failure characterization of spot welded high strength steel sheet” International Journal of Fatigue, 29, 879-886, 2007.
• [34] Callister W. D., “Fundamentals of Materials Science and Engineering” John Wiley and Sons Ltd, 2004.