Metal Katkılı MOF-5 İçeren Karışık Matriksli Membranlar İle Hidrojen Geçirgenliğinin İyileştirilmesi

Yıl 2018, Cilt: 7 Sayı: 2, 166 - 173, 30.12.2018

Hülya Aykaç Özen , Bahtiyar Öztürk

https://doi.org/10.17100/nevbiltek.434687

Öz

Hidrojen, yüksek enerji yoğunluğu ve çevreye
zarar vermeyen özellikleri ile geleceğin enerji taşıyıcısı olarak
görülmektedir. Doğada saf halde bulunmayan hidrojen, gaz karışımından çeşitli
tekniklerle ayrılabilmektedir.  Bu ayırma
prosesleri içerisinde yer alan membran teknolojisi, enerji verimliliği ve
mekanik dayanıklılığı sayesinde son yıllarda dikkati üzerine çekmiştir. Membran
teknolojileri içinde yer alan ve membran içerisine dolgu maddesi ilavesiyle
oluşturulan karışık matriksli membranlar (MMM) ile gaz ayırma özelliklerinin
iyileştirildiği görülmüştür. Karışık matriksli membranlarda dolgu maddesi
olarak kullanılan MOF yapıları da yüksek yüzey alanları ve gözenek
hacimlerinden dolayı tercih edilmekte ve gaz geçirgenliğine olumlu etki
yapmaktadır. Bu çalışmada, iki farklı metal kullanarak NiCoMOF-5 yapısı
sentezlenmiştir. Karışık matriksli membran hazırlamak üzere poliimit membrana
NiCoMOF-5 ilave edilmiştir. Oluşturulan yapılar çeşitli karakterizasyon
işlemlerine tabi tutulmuştur. Sonuçlar, karışık matriksli membranın başarılı
bir şekilde sentezlendiğini ve MOF ilave edilen poliimit membranın saf
poliimide göre gaz geçirgenlik performansını arttırdığını göstermiştir

Anahtar Kelimeler

Hidrojen, Metal Organik Kafes, Karışık Matriksli Membran

Improvement of Hydrogen Permeability with Mixed Matrix Membranes Containing Metal Doped MOF-5

Öz

Hydrogen is seen as the energy carrier of the
future with its high energy density and envrironmental friendly properties. Since hydrogen is not pure in nature, it can be
separated from the gas mixture by various techniques. Membrane technology
involved in hydrogen separation processes has attracted attention in recent
years thanks to its energy efficiency and mechanical strength. It has been
found that the mixed matrix membranes formed by the addition of the filler
material inside the membrane technology improve the gas separation properties.
MOF structures used as a filler material are also preferred due to their high
surface area and pore volume and have a positive effect on gas permeability. In
this work, NiCoMOF-5 structure was synthesized using two different metals.
Then, NiCoMOF-5 was added into polyimide membrane to prepare a mixed matrix
membrane. The obtained MOF and MMM structures were evaluated various
characterization procedures. The results show that the mixed matrix membrane is
successfully synthesized and that the MOF added polyimide membrane improves the
gas permeability performance relative to the pure polyimide.

Anahtar Kelimeler

Hydrogen, Metal Organic Framework, Mixed Matrix Membrane

Kaynakça

• [1] Dincer I., "Technical, environmental and exergetic aspects of hydrogen energy systems" International Journal of Hydrogen Energy, 27, 265-285. 2002.
• [2] Jain I.P., "Hydrogen the fuel for 21st century" International Journal of Hydrogen Energy, 34, 7368-7378,2009.
• [3] Züttel A., "Materials for hydrogen storage" Materials Today, 6, 24-33, 2003.
• [4] Berg A.W.C. and Arean C.O., "Materials for hydrogen storage: current research trends and perspectives" Chemical Communications, 6, 668-681, 2008
• [5] Adhikari S. and Fernando S.,"Hydrogen Membrane Separation Techniques" Industrial & Engineering Chemistry Research, 45, 875-881, 2006.
• [6] Arjmandi M. and Pakizeh M., "Mixed matrix membranes incorporated with cubic-MOF-5 for improved polyetherimide gas separation membranes: Theory and experiment" Journal of Industrial and Engineering Chemistry, 20, 3857-3868, 2014.
• [7] Perez E.V., Balkus J., Ferraris J.P., Musselman I.H., "Mixed-matrix membranes containing MOF-5 for gas separations" Journal of Membrane Science, 328, 165-173. 2009.
• [8] Li J., Cheng S., Zhao Q., Long P., Dong J., "Synthesis and hydrogen-storage behavior of metal–organic framework MOF-5" International Journal of Hydrogen Energy, 34, 1377-1382, 2009.
• [9] Li, H., Shi W., Zhao K., Li H., Bing Y., Cheng P., "Enhanced Hydrostability in Ni-Doped MOF-5" Inorganic Chemistry, 2012. 519200-9207.
• [10] Yang, J.-M., Q. Liu, and W.-Y. Sun, Co(II)-doped MOF-5 nano/microcrystals: Solvatochromic behaviour, sensing solvent molecules and gas sorption property. Journal of Solid State Chemistry, 2014. 218: p. 50-55.
• [11] Yang, J.-M., Q. Liu, and W.-Y. Sun, Shape and size control and gas adsorption of Ni(II)-doped MOF-5 nano/microcrystals. Microporous and Mesoporous Materials, 2014. 190(Supplement C): p. 26-31.
• [12] Ozturk, B. and F. Demirciyeva, Comparison of biogas upgrading performances of different mixed matrix membranes. Chemical Engineering Journal, 2013. 222: p. 209-217.
• [13] Huang, L., et al., Synthesis, morphology control, and properties of porous metal–organic coordination polymers. Microporous and Mesoporous Materials, 2003. 58(2): p. 105-114.
• [14] Sabouni, R., H. Kazemian, and S. Rohani, A novel combined manufacturing technique for rapid production of IRMOF-1 using ultrasound and microwave energies. Chemical Engineering Journal, 2010. 165(3): p. 966-973.
• [15] Weng, T.H., H.H. Tseng, and M.Y. Wey, Fabrication and characterization of poly(phenylene oxide)/SBA-15/carbon molecule sieve multilayer mixed matrix membrane for gas separation. International Journal of Hydrogen Energy, 2010. 35(13): p. 6971-6983.