Öz
Nikel (Ni)
ve grafen nano plaka (GNP) takviyeli Ni esaslı kaplamalar, Watts tipi kaplama
banyosu kullanılarak doğru akım (DC) şartları altında hazırlanmıştır.
Elektrolitik kaplama için altlık olarak St 37 çelik, yanal boyutu ~5 nm ve
kalınlığı ~5-8 nm boyutlarında olan GNP tabakaları ise takviye malzemesi olarak
kullanılmıştır. Elde edilen kaplamaların morfolojik, elementel ve faz
değerlendirmeleri sırasıyla taramalı elektron mikroskobu (SEM), enerji
dağılımlı x-ışınları spektrometre (EDS) ve X-ışını kırınım ölçer (XRD) ile
gerçekleştirildi. Ayrıca hazırlanan kaplamaların sertlik ve aşınma davranışları
incelenmiştir. Elektrolitik yöntemle hazırlanan 0,3 g/l GNP içeren kompozit
kaplama daha düzgün istif yoğunluğuna ve daha kompakt bir yapıya sahiptir. Ni-GNP
(0.3 g/l) kompozit kaplama, saf Ni kaplamaya kıyasla üstün sürtünme özellikleri
sergilemiştir.
Anahtar Kelimeler
Elektrolitik Kaplama Nikel-Grafen Morfoloji Mikroyapı Aşınma.
Destekleyen Kurum
Bilecik Şeyh Edebali Üniversitesi
Proje Numarası
2018-01.BŞEÜ.03-03
Teşekkür
Bu çalışma Bilecik Şeyh Edebali Üniversitesi, Bilimsel Araştırma Projeleri birimi tarafından desteklenmiştir (Proje No: 2018-01.BŞEÜ.03-03).
Kaynakça
- Referans1 Rezaeiolum, A., Aliofkhazraei, M., Karimzadeh, A., Rouhaghdam, A. S., Miresmaeili, R., “Electrodeposition of Ni-Mo and Ni-Mo-(nano Al2O3) multilayer coatings”, Surface Engineering, 34 (6), 423-432, 2017.
- Referans2 Baghery, P., Farzam, M., Mousavi, A. B., Hosseini, M., “Ni–TiO2 nanocomposite coating with high resistance to corrosion and wear”, Surface and Coatings Technology, 204 (23), 3804-3810, 2010.
- Referans3 Aruna, S. T., Srinivas, G., “Wear and corrosion resistant properties of electrodeposited Ni composite coating containing Al2O3-TiO2 composite powder”, Surface Engineering, 31 (9), 708-713, 2015.
- Referans4 Lanzutti, A., Lekka, M., Leitenburg, C de., Fedrizzi, L., “Effect of pulse current on wear behavior of Ni matrix micro-and nano-SiC composite coatings at room and elevated temperature”, Tribology International, 132, 50-61, 2019.
- Referans5 Kuang, D., Xu, L., Liu, L., Hu, W., Wu, Y., “Graphene–nickel composites”, Applied Surface Science, 273, 484-490, 2013.
- Referans6 Jiang, K., Li, J., Liu, J., “Electrochemical codeposition of graphene platelets and nickel for improved corrosion resistant properties”, RSC Advances, 4, 36245-36252, 2014.
- Referans7 Kyhl, L., Nielsen, S. F., Čabo, A. G., Cassidy, A., Miwa, J. A., Hornekær, L., “Graphene as an anti-corrosion coating layer”, Faraday Discussions, 180, 495-509, 2015.
- Referans8 Algul, H., Tokur, M., Ozcan, S., Uysal, M., Cetinkaya, T., Akbulut, H., Alp, A., “The effect of graphene content and sliding speed on the wear mechanism of nickel–graphene nanocomposites”, Applied Surface Science, 359, 340-348, 2015.
- Referans9 Kumar, C. M. P., Venkatesha, T. V., & Shabadi, R., “Preparation and corrosion behavior of Ni and Ni–graphene composite coatings”, Materials Research Bulletin, 48(4), 1477-1483, 2013.
- Referans10 Xiang, L., Shen, Q., Zhang, Y., Bai, W., Nie, C., “One-step electrodeposited Ni-graphene composite coating with excellent tribological properties”, Surface & Coatings Technology, 373, 38-46, 2019.
Öz
Nickel (Ni) - Graphene
nanoplatelet (GNP) composite coating was prepared under direct current (DC)
conditions by co-deposition of GNP particles and Ni from a Watts type bath. St
37 steel substrate was used for electrodeposition and GNP layers having a
lateral dimension of ~5 nm and a thickness of ~5-8 nm were used as
reinforcement. Morphological, elemental and phase evaluations were conducted on
the deposited coatings by scanning electron microscopy (SEM), energy dispersive
X-ray spectroscopy (EDS) and X-ray diffraction (XRD), respectively.
Furthermore, the hardness and wear behaviors of the prepared coatings were
investigated. The results showed that the composite coating prepared by
electrodeposition in a Ni plating bath containing 0.3 g/l GNP, exhibited a
uniform and compact structure. Ni-GNP (0.3 g/l) composite coating showed
superior frictional properties compared to pure Ni coating.
Anahtar Kelimeler
Electrodeposition Nickel-Graphene Morphology Microstructure Wear
Proje Numarası
2018-01.BŞEÜ.03-03
Kaynakça
- Referans1 Rezaeiolum, A., Aliofkhazraei, M., Karimzadeh, A., Rouhaghdam, A. S., Miresmaeili, R., “Electrodeposition of Ni-Mo and Ni-Mo-(nano Al2O3) multilayer coatings”, Surface Engineering, 34 (6), 423-432, 2017.
- Referans2 Baghery, P., Farzam, M., Mousavi, A. B., Hosseini, M., “Ni–TiO2 nanocomposite coating with high resistance to corrosion and wear”, Surface and Coatings Technology, 204 (23), 3804-3810, 2010.
- Referans3 Aruna, S. T., Srinivas, G., “Wear and corrosion resistant properties of electrodeposited Ni composite coating containing Al2O3-TiO2 composite powder”, Surface Engineering, 31 (9), 708-713, 2015.
- Referans4 Lanzutti, A., Lekka, M., Leitenburg, C de., Fedrizzi, L., “Effect of pulse current on wear behavior of Ni matrix micro-and nano-SiC composite coatings at room and elevated temperature”, Tribology International, 132, 50-61, 2019.
- Referans5 Kuang, D., Xu, L., Liu, L., Hu, W., Wu, Y., “Graphene–nickel composites”, Applied Surface Science, 273, 484-490, 2013.
- Referans6 Jiang, K., Li, J., Liu, J., “Electrochemical codeposition of graphene platelets and nickel for improved corrosion resistant properties”, RSC Advances, 4, 36245-36252, 2014.
- Referans7 Kyhl, L., Nielsen, S. F., Čabo, A. G., Cassidy, A., Miwa, J. A., Hornekær, L., “Graphene as an anti-corrosion coating layer”, Faraday Discussions, 180, 495-509, 2015.
- Referans8 Algul, H., Tokur, M., Ozcan, S., Uysal, M., Cetinkaya, T., Akbulut, H., Alp, A., “The effect of graphene content and sliding speed on the wear mechanism of nickel–graphene nanocomposites”, Applied Surface Science, 359, 340-348, 2015.
- Referans9 Kumar, C. M. P., Venkatesha, T. V., & Shabadi, R., “Preparation and corrosion behavior of Ni and Ni–graphene composite coatings”, Materials Research Bulletin, 48(4), 1477-1483, 2013.
- Referans10 Xiang, L., Shen, Q., Zhang, Y., Bai, W., Nie, C., “One-step electrodeposited Ni-graphene composite coating with excellent tribological properties”, Surface & Coatings Technology, 373, 38-46, 2019.
Ayrıntılar
| Birincil Dil | Türkçe |
|---|---|
| Konular | Mühendislik |
| Bölüm | Diğer Bölümler |
| Yazarlar | |
| Proje Numarası | 2018-01.BŞEÜ.03-03 |
| Yayımlanma Tarihi | 15 Aralık 2019 |
| Kabul Tarihi | 4 Aralık 2019 |
| Yayımlandığı Sayı | Yıl 2019 - Cilt:8 - IMSMATEC Özel Sayı |
Kaynak Göster
Dergimizin tarandığı indeksler