Effect of fullerene (C60) nanoparticle on mechanical properties of hot-extruded aluminum matrix composite

Yıl 2019, Cilt: 8 Sayı: 2, 1153 - 1159, 31.07.2019

Muhammet Emre Turan

https://doi.org/10.28948/ngumuh.479757

Cited By: 1

Öz

Aluminum matrix composites have attractive
attention for scientists and manufacturers. In this study, fullerene (C60)
nanoparticle reinforced aluminum matrix composite was fabricated via semi
powder metallurgy method. Development of mechanical performance of pure
aluminum was aimed using C60 nanoparticle. Microstructure analyzes were
completed by X-ray diffraction (XRD) and Scanning Electron Microscope (SEM).
Hardness, compression and tensile properties of unreinforced aluminum and C60
reinforced composite were evaluated. Results show that nanoparticle was
homogenously distributed in matrix and there were no cracks or macro defects.
Hardness was significantly improved with the addition of fullerene and
extrusion process. Al-C60 composite exhibited better compression and tensile
performance than pure aluminum.

Anahtar Kelimeler

Aluminum, Fullerene, Mechanical properties, sem

FULLERENİN SICAK EKSTRÜZYONLU ALUMİNYUM MATRİSLİ KOMPOZİTİN MEKANİK ÖZELLİKLERİNE ETKİSİ

Öz

    Alüminyum matrisli kompozitler sanayiciler
ve bilim insanları için dikkat çekici bir öneme sahiptir. Bu çalışmada fulleren
(C60) takviyeli alüminyum matrisli kompozit malzeme, yarı toz metalürjisi
yöntemiyle üretilmiştir. X Işını Kırınımı (XRD) ve Taramalı Elektron
Mikroskopuyla (SEM) numunelerin mikro yapı analizleri gerçekleştirilmiştir. Saf
alüminyum ve Al-C60 kompozitinin sertlik, basma ve çekme mukavemetleri hakkında
değerlendirmeler yapılmıştır. Sonuçlardan yola çıkarak, fullerenin alüminyum
matrisi içerisinde homojen dağıldığı gözlemlenmiştir ve herhangi bir çatlağa ya
da makro hatalara rastlanmamıştır. Fullerenin ilavesiyle ve ekstrüzyon
prosesiyle alüminyumun sertliğinde önemli bir artış görülmüştür. Al-C60
kompoziti saf alüminyuma kıyasla daha iyi basma ve çekme mukavemeti
performansları sergilemiştir.

Anahtar Kelimeler

Alüminyum, Fulleren, Mekanik özellikler, sem

Kaynakça

• [1] A. Nag vd., “Hybrid aluminium matrix composite AWJ turning using olivine and Barton garnet”, Int. J. Adv. Manuf. Technol., c. 94, sy 5, ss. 2293-2300, Şub. 2018.
• [2] B. Ma, J. Wang, T. H. Lee, S. E. Dorris, J. Wen, ve U. Balachandran, “Microstructural characterization of Al 4 C 3 in aluminum–graphite composite prepared by electron-beam melting”, J. Mater. Sci., ss. 1–8, 2018.
• [3] X. Gao vd., “Preparation and tensile properties of homogeneously dispersed graphene reinforced aluminum matrix composites”, Mater. Des., c. 94, ss. 54–60, 2016.
• [4] E. Ghasali, P. Sangpour, A. Jam, H. Rajaei, K. Shirvanimoghaddam, ve T. Ebadzadeh, “Microwave and spark plasma sintering of carbon nanotube and graphene reinforced aluminum matrix composite”, Arch. Civ. Mech. Eng., c. 18, sy 4, ss. 1042-1054, Eyl. 2018.
• [5] R. Pérez-Bustamante vd., “Microstructural and mechanical characterization of Al–MWCNT composites produced by mechanical milling”, Mater. Sci. Eng. A, c. 502, sy 1, ss. 159-163, Şub. 2009.
• [6] J. Li, X. Zhang, ve L. Geng, “Improving graphene distribution and mechanical properties of GNP/Al composites by cold drawing”, Mater. Des., c. 144, ss. 159-168, Nis. 2018.
• [7] R. Taylor ve D. R. Walton, “The chemistry of fullerenes”, Nature, c. 363, sy 6431, s. 685, 1993.
• [8] M. E. Turan, Y. Sun, ve Y. Akgul, “Mechanical, tribological and corrosion properties of fullerene reinforced magnesium matrix composites fabricated by semi powder metallurgy”, J. Alloys Compd., c. 740, ss. 1149–1158, 2018.
• [9] K. Choi, S. Shin, D. Bae, ve H. Choi, “Mechanical Properties of Aluminium-Based Nanocomposite Reinforced with Fullerenes”, içinde Light Metals 2014, Springer, 2014, ss. 1437–1440.
• [10] F. A. Khalid, O. Beffort, U. E. Klotz, B. A. Keller, P. Gasser, ve S. Vaucher, “Study of microstructure and interfaces in an aluminium–C60 composite material”, Acta Mater., c. 51, sy 15, ss. 4575–4582, 2003.
• [11] M. Rashad, F. Pan, Z. Yu, M. Asif, H. Lin, ve R. Pan, “Investigation on microstructural, mechanical and electrochemical properties of aluminum composites reinforced with graphene nanoplatelets”, Prog. Nat. Sci. Mater. Int., c. 25, sy 5, ss. 460–470, 2015.
• [12] K. K. Deng, X. J. Wang, Y. W. Wu, X. S. Hu, K. Wu, ve W. M. Gan, “Effect of particle size on microstructure and mechanical properties of SiCp/AZ91 magnesium matrix composite”, Mater. Sci. Eng. A, c. 543, ss. 158–163, 2012.
• [13] Q. B. Nguyen vd., “Enhancing hardness, CTE and compressive response of powder metallurgy magnesium reinforced with metastable Al90Y10 powder particles”, Powder Metall., c. 59, sy 3, ss. 209–215, 2016.
• [14] M. K. Habibi, A. S. Hamouda, ve M. Gupta, “Hybridizing boron carbide (B4C) particles with aluminum (Al) to enhance the mechanical response of magnesium based nano-composites”, J. Alloys Compd., c. 550, ss. 83–93, 2013.
• [15] M. Rashad, F. Pan, A. Tang, ve M. Asif, “Effect of graphene nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method”, Prog. Nat. Sci. Mater. Int., c. 24, sy 2, ss. 101–108, 2014.