Araştırma Makalesi
PDF Zotero Mendeley EndNote BibTex Kaynak Göster

INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075

Yıl 2020, Cilt 9, Sayı 1, 528 - 537, 30.01.2020
https://doi.org/10.28948/ngumuh.681273

Öz

In this study, effect of quenching temperature on mechanical properties of Aluminum Alloy 7075 (AA7075) are investigated. Several quenching environment is tested oil (20W50), icy water (2 oC), water (25 oC), and hot water (85 oC). Mechanical properties of the materials are measured. X-ray diffraction analyses are also performed for each condition. Results indicated that properties at hot water quenching and oil quenching are found to be similar. It is concluded that oil quenching does not have significant effect on mechanical properties.

Kaynakça

  • [1] J. T. Staley, "History of wrought–aluminium–alloy development," in Aluminium Alloys: Contemporary Research and Applications, Treaties on Materials Science and Technology, vol. 31, R. D. D. A. K. Vasudevan, Ed. Pennsylvania: Alcoa Technical Center, 2012, pp. 3-31.
  • [2] A. K. Vasudevan and R. D. Doherty, Aluminum Alloys-Contemporary Research and Applications: Contemporary Research and Applications. England: Elsevier, 1989.
  • [3] C. Mondal and A. K. Mukhopadhyay, "On the nature of T(Al2Mg3Zn3) and S(Al2CuMg) phases present in as-cast and annealed 7055 aluminum alloy," Materials Science and Engineering: A, vol. 391, no. 1, pp. 367-376, 2005.
  • [4] A. Lalpour, A. Soltanipour, and K. Farmanesh, "Effect of Friction Stir Processing on the Microstructure and Superplasticity of 7075 Aluminum Alloy," in 5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM15) Tehran, Iran, 2015, pp. 1-6.
  • [5] X.-G. Fan, D.-M. Jiang, Q.-C. Meng, B.-Y. Zhang, and W. Tao, "Evolution of eutectic structures in Al-Zn-Mg-Cu alloys during heat treatment," Transactions of Nonferrous Metals Society of China, vol. 16, no. 3, pp. 577-581, 2006.
  • [6] S. T. Lim, I. S. Eun, and S. W. Nam, "Control of equilibrium phases (M, T, S) in the modified aluminum alloy 7175 for thick forging applications," Materials Transactions, vol. 44, no. 1, pp. 181-187, 2003.
  • [7] B. Binesh and A. K. Mehrdad, "Phase evolution and mechanical behavior of the semi-solid SIMA processed 7075 aluminum alloy," Metals, vol. 6, no. 3, p. 42, 2016.
  • [8] D. Ozyürek, R. Yılmaz, and E. Kibar, "The effects of retrogression parameters in RRA treatment on tensile strength of 7075 aluminium alloys," Journal of the Faculty of Engineering and Architecture of Gazi University, vol. 27, no. 1, pp. 193-203, 2012.
  • [9] R. Clark et al., "On the correlation of mechanical and physical properties of 7075-T6 Al alloy," Engineering Failure Analysis, vol. 12, no. 4, pp. 520-526, 2005/08/01/ 2005.
  • [10] D. Dumont, A. Deschamps, and Y. Brechet, "On the relationship between microstructure, strength and toughness in AA7050 aluminum alloy," Materials Science and Engineering: A, vol. 356, no. 1, pp. 326-336, 2003/09/15/ 2003.
  • [11] A. T. Güner, Effect of quenching temperature on mechanical properties of semi-solid forming aluminum alloys (Institute of Science and Technology). Pamukkale University, 2013.
  • [12] B. Oğuz, Demir dışı metallerin kaynağı (OERLIKON yayını). 1990, pp. 1-23.
  • [13] C. Demir, E. B. Mentese, and M. A. Togay, "Alüminyum ısıl işleminde su verme uygulamaları ve kalıntı gerilme etkisi," Componenta doktas, 2017.
  • [14] I. Polmear, D. John, J.-F. Nie, and M. Qian, Light alloys: metallurgy of the light metals. Butterworth-Heinemann, 2017.
  • [15] S. Kilic and F. Ozturk, "Evaluation of Mathematical Models Performances in XRD Analysis for Determination of Volumetric Ratios of Phases," in 1st International Mediterranean Science and Engineering Congress (IMSEC), Adana, Turkey, 2016.
  • [16] H. Moumenı, S. Alleg, C. Djebbarı, F. Z. Bentayeb, and J. M. Greneche, "Synthesis and characterisation of nanostructured FeCo alloys," Journal of Materials Science, journal article vol. 39, no. 16, pp. 5441-5443, 2004.
  • [17] S. Mehdaoui et al., "Study of the properties of CuInSe2 materials prepared from nanoparticle powder," Materials Characterization, vol. 60, no. 5, pp. 451-455, 5// 2009.
  • [18] N. Benslim et al., "XRD and TEM characterizations of the mechanically alloyed CuIn0.5Ga0.5Se2 powders," Journal of Alloys and Compounds, vol. 489, no. 2, pp. 437-440, 1/21/ 2010.
  • [19] G. Dini, A. Najafizadeh, S. M. Monir-Vaghefi, and R. Ueji, "Grain size effect on the martensite formation in a high-manganese TWIP steel by the Rietveld method," Journal of Materials Science & Technology, vol. 26, no. 2, pp. 181-186, 2010.
  • [20] A. E. Karpikhin et al., "Structure of hydroxyapatite powders prepared through dicalcium phosphate dihydrate hydrolysis," Inorganic Materials, journal article vol. 52, no. 2, pp. 170-175, 2016.
  • [21] Z. K. Heiba, M. B. Mohamed, and A. M. Wahba, "Effect of Mo substitution on structural and magnetic properties of Zinc ferrite nanoparticles," Journal of Molecular Structure, vol. 1108, pp. 347-351, 3/15/ 2016.
  • [22] http://maud.radiographema.eu/. (2017, January 2017).
  • [23] http://profex.doebelin.org/. (2017, January 2017).
  • [24] https://www.ill.eu/sites/fullprof/. (2017, January 2017).
  • [25] A. Pastor and H. G. Svoboda, "Time-evolution of heat affected zone (HAZ) of friction stir welds of AA7075-T651," Journal of Materials Physics and Chemistry, vol. 1, no. 4, pp. 58-64, 2013.
  • [26] R. H. Oskouei, M. R. Barati, and R. N. Ibrahim, "Surface characterizations of fretting fatigue damage in aluminum alloy 7075-T6 clamped joints: the beneficial role of Ni–P coatings," Materials, vol. 9, no. 3, p. 141, 2016.

Yıl 2020, Cilt 9, Sayı 1, 528 - 537, 30.01.2020
https://doi.org/10.28948/ngumuh.681273

Öz

Kaynakça

  • [1] J. T. Staley, "History of wrought–aluminium–alloy development," in Aluminium Alloys: Contemporary Research and Applications, Treaties on Materials Science and Technology, vol. 31, R. D. D. A. K. Vasudevan, Ed. Pennsylvania: Alcoa Technical Center, 2012, pp. 3-31.
  • [2] A. K. Vasudevan and R. D. Doherty, Aluminum Alloys-Contemporary Research and Applications: Contemporary Research and Applications. England: Elsevier, 1989.
  • [3] C. Mondal and A. K. Mukhopadhyay, "On the nature of T(Al2Mg3Zn3) and S(Al2CuMg) phases present in as-cast and annealed 7055 aluminum alloy," Materials Science and Engineering: A, vol. 391, no. 1, pp. 367-376, 2005.
  • [4] A. Lalpour, A. Soltanipour, and K. Farmanesh, "Effect of Friction Stir Processing on the Microstructure and Superplasticity of 7075 Aluminum Alloy," in 5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM15) Tehran, Iran, 2015, pp. 1-6.
  • [5] X.-G. Fan, D.-M. Jiang, Q.-C. Meng, B.-Y. Zhang, and W. Tao, "Evolution of eutectic structures in Al-Zn-Mg-Cu alloys during heat treatment," Transactions of Nonferrous Metals Society of China, vol. 16, no. 3, pp. 577-581, 2006.
  • [6] S. T. Lim, I. S. Eun, and S. W. Nam, "Control of equilibrium phases (M, T, S) in the modified aluminum alloy 7175 for thick forging applications," Materials Transactions, vol. 44, no. 1, pp. 181-187, 2003.
  • [7] B. Binesh and A. K. Mehrdad, "Phase evolution and mechanical behavior of the semi-solid SIMA processed 7075 aluminum alloy," Metals, vol. 6, no. 3, p. 42, 2016.
  • [8] D. Ozyürek, R. Yılmaz, and E. Kibar, "The effects of retrogression parameters in RRA treatment on tensile strength of 7075 aluminium alloys," Journal of the Faculty of Engineering and Architecture of Gazi University, vol. 27, no. 1, pp. 193-203, 2012.
  • [9] R. Clark et al., "On the correlation of mechanical and physical properties of 7075-T6 Al alloy," Engineering Failure Analysis, vol. 12, no. 4, pp. 520-526, 2005/08/01/ 2005.
  • [10] D. Dumont, A. Deschamps, and Y. Brechet, "On the relationship between microstructure, strength and toughness in AA7050 aluminum alloy," Materials Science and Engineering: A, vol. 356, no. 1, pp. 326-336, 2003/09/15/ 2003.
  • [11] A. T. Güner, Effect of quenching temperature on mechanical properties of semi-solid forming aluminum alloys (Institute of Science and Technology). Pamukkale University, 2013.
  • [12] B. Oğuz, Demir dışı metallerin kaynağı (OERLIKON yayını). 1990, pp. 1-23.
  • [13] C. Demir, E. B. Mentese, and M. A. Togay, "Alüminyum ısıl işleminde su verme uygulamaları ve kalıntı gerilme etkisi," Componenta doktas, 2017.
  • [14] I. Polmear, D. John, J.-F. Nie, and M. Qian, Light alloys: metallurgy of the light metals. Butterworth-Heinemann, 2017.
  • [15] S. Kilic and F. Ozturk, "Evaluation of Mathematical Models Performances in XRD Analysis for Determination of Volumetric Ratios of Phases," in 1st International Mediterranean Science and Engineering Congress (IMSEC), Adana, Turkey, 2016.
  • [16] H. Moumenı, S. Alleg, C. Djebbarı, F. Z. Bentayeb, and J. M. Greneche, "Synthesis and characterisation of nanostructured FeCo alloys," Journal of Materials Science, journal article vol. 39, no. 16, pp. 5441-5443, 2004.
  • [17] S. Mehdaoui et al., "Study of the properties of CuInSe2 materials prepared from nanoparticle powder," Materials Characterization, vol. 60, no. 5, pp. 451-455, 5// 2009.
  • [18] N. Benslim et al., "XRD and TEM characterizations of the mechanically alloyed CuIn0.5Ga0.5Se2 powders," Journal of Alloys and Compounds, vol. 489, no. 2, pp. 437-440, 1/21/ 2010.
  • [19] G. Dini, A. Najafizadeh, S. M. Monir-Vaghefi, and R. Ueji, "Grain size effect on the martensite formation in a high-manganese TWIP steel by the Rietveld method," Journal of Materials Science & Technology, vol. 26, no. 2, pp. 181-186, 2010.
  • [20] A. E. Karpikhin et al., "Structure of hydroxyapatite powders prepared through dicalcium phosphate dihydrate hydrolysis," Inorganic Materials, journal article vol. 52, no. 2, pp. 170-175, 2016.
  • [21] Z. K. Heiba, M. B. Mohamed, and A. M. Wahba, "Effect of Mo substitution on structural and magnetic properties of Zinc ferrite nanoparticles," Journal of Molecular Structure, vol. 1108, pp. 347-351, 3/15/ 2016.
  • [22] http://maud.radiographema.eu/. (2017, January 2017).
  • [23] http://profex.doebelin.org/. (2017, January 2017).
  • [24] https://www.ill.eu/sites/fullprof/. (2017, January 2017).
  • [25] A. Pastor and H. G. Svoboda, "Time-evolution of heat affected zone (HAZ) of friction stir welds of AA7075-T651," Journal of Materials Physics and Chemistry, vol. 1, no. 4, pp. 58-64, 2013.
  • [26] R. H. Oskouei, M. R. Barati, and R. N. Ibrahim, "Surface characterizations of fretting fatigue damage in aluminum alloy 7075-T6 clamped joints: the beneficial role of Ni–P coatings," Materials, vol. 9, no. 3, p. 141, 2016.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik, Makine
Bölüm Makine Mühendisliği
Yazarlar

Süleyman KILIÇ
AHİ EVRAN ÜNİVERSİTESİ
0000-0002-1681-9403
Türkiye


İlyas KACAR
NİĞDE ÖMER HALİSDEMİR ÜNİVERSİTESİ
0000-0002-5887-8807
Türkiye


Mevlut ŞAHİN Bu kişi benim
NİĞDE ÖMER HALİSDEMİR ÜNİVERSİTESİ
Türkiye


Fahrettin ÖZTÜRK Bu kişi benim
YILDIRIM BEYAZIT ÜNİVERSİTESİ
Türkiye


Oğuz ERDEM Bu kişi benim
AHİ EVRAN ÜNİVERSİTESİ
Türkiye

Destekleyen Kurum Ahi Evran University
Proje Numarası MMF.A3.17.001
Teşekkür This work was supported by Ahi Evran University, Scientific Research Projects Coordination Unit. Project Number:MMF.A3.17.001 . We would like to thank the Scientific Research Coordination Unit for their financial support.
Yayımlanma Tarihi 30 Ocak 2020
Başvuru Tarihi 6 Aralık 2018
Kabul Tarihi 6 Mart 2019
Yayınlandığı Sayı Yıl 2020, Cilt 9, Sayı 1

Kaynak Göster

Bibtex @araştırma makalesi { ngumuh681273, journal = {Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi}, issn = {}, eissn = {2564-6605}, address = {Niğde Üniversitesi Mühendislik Fakültesi, Merkez Yerleşke, Niğde}, publisher = {Niğde Ömer Halisdemir Üniversitesi}, year = {2020}, volume = {9}, pages = {528 - 537}, doi = {10.28948/ngumuh.681273}, title = {INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075}, key = {cite}, author = {Kılıç, Süleyman and Kacar, İlyas and Şahin, Mevlut and Öztürk, Fahrettin and Erdem, Oğuz} }
APA Kılıç, S. , Kacar, İ. , Şahin, M. , Öztürk, F. & Erdem, O. (2020). INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075 . Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , 9 (1) , 528-537 . DOI: 10.28948/ngumuh.681273
MLA Kılıç, S. , Kacar, İ. , Şahin, M. , Öztürk, F. , Erdem, O. "INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075" . Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 9 (2020 ): 528-537 <https://dergipark.org.tr/tr/pub/ngumuh/issue/52170/681273>
Chicago Kılıç, S. , Kacar, İ. , Şahin, M. , Öztürk, F. , Erdem, O. "INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075". Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 9 (2020 ): 528-537
RIS TY - JOUR T1 - INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075 AU - Süleyman Kılıç , İlyas Kacar , Mevlut Şahin , Fahrettin Öztürk , Oğuz Erdem Y1 - 2020 PY - 2020 N1 - doi: 10.28948/ngumuh.681273 DO - 10.28948/ngumuh.681273 T2 - Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi JF - Journal JO - JOR SP - 528 EP - 537 VL - 9 IS - 1 SN - -2564-6605 M3 - doi: 10.28948/ngumuh.681273 UR - https://doi.org/10.28948/ngumuh.681273 Y2 - 2019 ER -
EndNote %0 Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075 %A Süleyman Kılıç , İlyas Kacar , Mevlut Şahin , Fahrettin Öztürk , Oğuz Erdem %T INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075 %D 2020 %J Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi %P -2564-6605 %V 9 %N 1 %R doi: 10.28948/ngumuh.681273 %U 10.28948/ngumuh.681273
ISNAD Kılıç, Süleyman , Kacar, İlyas , Şahin, Mevlut , Öztürk, Fahrettin , Erdem, Oğuz . "INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075". Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 9 / 1 (Ocak 2020): 528-537 . https://doi.org/10.28948/ngumuh.681273
AMA Kılıç S. , Kacar İ. , Şahin M. , Öztürk F. , Erdem O. INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075. NÖHÜ Müh. Bilim. Derg.. 2020; 9(1): 528-537.
Vancouver Kılıç S. , Kacar İ. , Şahin M. , Öztürk F. , Erdem O. INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi. 2020; 9(1): 528-537.
IEEE S. Kılıç , İ. Kacar , M. Şahin , F. Öztürk ve O. Erdem , "INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075", Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, c. 9, sayı. 1, ss. 528-537, Oca. 2020, doi:10.28948/ngumuh.681273

 23135