Elektroeğirilmiş polivinilpirolidon / grafit kompozit nanofiber keçeler: katkının morfoloji ve ıslanabilirlik üzerine etkisi

Yıl 2021, Cilt: 10 Sayı: 2, 840 - 846, 27.07.2021

Şerife Akkoyun

https://doi.org/10.28948/ngumuh.805315

Öz

Bu çalışmanın amacı grafit (GR) oranının grafit katkılı polivinilpirolidon (PVP) kompozit nanoliflerin morfolojisi ve ıslanabilirlik özellikleri üzerindeki etkisini araştırmaktır. Bu bağlamda, elektroeğirme yöntemi kullanılarak, PVP nanolif keçeler ile birlikte farklı oranlarda (%0,6, %1,2, %1,8, %2,4, %3, %3,6 ve %4,2 GR oranlarında (% PVP)) katkı içeren PVP/GR kompozit nanolif keçeleri üretilmiştir. Nanoliflerin morfolojileri ve çapları taramalı elektron mikroskobu (SEM) ile belirlenmiştir. Üretilen katkısız nanoliflerin ortalama çapı 218 nm olarak saptanmış iken, kompozit nanoliflerin çapları 170 nm ile 203 nm arasında değişmektedir. Keçelerin ıslanabilirliğini incelemek amacı ile temas açısı ölçümleri gerçekleştirimiştir. Beklentilerin aksine, grafit oranı arttıkça ıslanabilirliğin arttığı gözlemlenmiştir. Burada, grafitin son yıllarda keşfedilen hafif düzeyde hidrofilik özelliğinin etkili olduğu düşünülmektedir. Ayrıca, bu bulguların nanoliflerin elektriksel iletkenlikleri ile ilişkileri de incelenmiştir.

Anahtar Kelimeler

elektroeğirme, polivinilpirolidon, grafit, nanolifler, ıslanabilirlik

Electrospun polyvinylpyrrolidone / graphite composite nanofiber mats: effect of the filler on the morphology and wettability

Öz

The aim of this study is to investigate the effect of graphite (GR) content on the morphology and wettability of polyvinylpyrrolidone (PVP) / GR composite nanofibers. For this purpose, PVP and PVP/GR composite nanofiber mats of various filler contents (0.6%, 1.2%, 1.8%, 2.4%, 3%, 3.6% and 4.2 % of GR (wt.% of PVP)) were fabricated by electrospinning. The morphology and diameters of the nanofibers were characterized by SEM. Average diameters of 218 nm for unfilled PVP nanofibers and between 170 nm and 203 nm for composite nanofibers were observed. The water wettability of the nanofiber mats was also characterized by contact angle measurements. Contrary to expectations, the results reveal an increase in the water wettability of composite PVP nanofiber mats with increasing graphite content. This evolution seems to be based on the mild hydrophilicity of graphite discovered in recent years. The relationship with nanofibers’ electrical conductivity was also examined.

Anahtar Kelimeler

electrospinning, polyvinylpyrrolidone, graphite, nanofibers, wettability

Kaynakça

• Kenry and C. T. Lim, Nanofiber technology: current status and emerging developments, Progress in Polymer Science, 70, 1-17, 2017. https://doi.org/ 10.1016/j.progpolymsci.2017.03.002
• Z.-M. Huang, Y.-Z. Zhang, M. Kotaki and S. Ramakrishna, A review on polymer nanofibers by electrospinning and their applications in nanocomposites, Composites Science and Technology, 63, 2223-2253, 2003. https://doi.org/ 10.1016/S0266-3538(03)00178-7
• M. Teodorescu and M. Bercea, Poly(vinylpyrrolidone) – A versatile polymer for biomedical and beyond medical applications, Polymer Plastics Technology and Engineering, 54, 923-943, 2015. https://doi.org/ 10.1080/03602559.2014.979506
• A. Nag, N. Afasrimanesh, S. Feng and S. C. Mukhopadhyay, Strain induced graphite/PDMS sensors for biomedical applications, Sensors and Actuators A: Physical, 271, 257-269, 2018. https://doi.org/10.1016/j.sna.2018.01.044
• Y. L. Hsin, K. C. Hwang and C.-T. Yeh, Poly(vinylpyrrolidone)-Modified graphite carbon nanofibers as promising supports for ptru catalysts in direct methanol fuel cells, JOrnal of American Chemical Society, 129, 9999-10010, 2007. https://doi.org/10.1021/ja072367a
• R. S. Kurusu and N. R. Demarquette, Surface modification to control the water wettability of electrospun mats, International Materials Reviews, 64(5), 249-287, 2019. 10.1080/09506608.2018. 1484577
• M. Maleki, A. Natalello, R. Pugliese and F. Gelain, Fabrication of nanofibrous electrospun scaffolds from a heterogenous library of co- and self-assembling peptides, Acta Biomaterialia, 51, 268-278, 2017. https://doi.org/10.1016/j.actbio.2017.01.038
• S. Huang, L. Zhou, M.-C. Li, Q. Wu, Y. Kojima and D. Zhou, Preparation and properties of electrospun poly(vinyl pyrrolidone)/cellulose nanocrystal/silver nanoparticle composite fibers, Materials, 9, 523, 2016. https://doi.org/10.3390/ma9070523
• M. A.-F. Basha, Magnetic and optical studies on polyvinylpyrrolidone thin films doped with rare earth metal salts, Polymer Journal, 42, 728-734, 2010. https://doi.org/10.1038/pj.2010.60
• E. Adeli, Irbesartan-loaded electrospun nanofibers-based PVP K90 for the drug dissolution improvement: Fabrication, in vitro performance assessment, and in vivo evaluation, Journal of Applied Polymer Science, 42212, 2015. https://doi.org/ 10.1002/app.42212
• G. Nie, X. Tong, Y. Zhang and S. Xue, Efficient production of 5-hydroxymethylfurfural (HMF) from D-fructose and inulin with graphite derivatives as catalysts, Catalysis Letters, 144, 1759-1765, 2014. https://doi.org/10.1007/s10562-014-1320-7
• J. S. LaFontaine, L. K. Prasad, C. Brough, D. A. Miller, J. W. McGinity and R. O. Williams III, Thermal processsing of PVP- and HPMC- based amorphous solid dispersions, AAPS Pharm SciTech, 17(1), 120-132, 2016. https://doi.org/ 10.1208/s12249-015-0417-7
• A. Kozbial, F. Zhou , Z. Li, H. Liu and L. Li , Are graphitic surfaces hydrophobic?, Accounts of Chemical Research, vol. 49, no. 12, pp. 2765-2773, 2016. https://doi.org/10.1021/acs.accounts.6b00447