DATA TRANSFER PROCEDURES FOR A 24-BIT ADC AND AN APPLICATION FOR MAGNETIC ANOMALY MEASUREMENTS

Cilt: 6 Sayı: 2 1 Mart 2011
  • Yavuz Ege
Engineering Sciences Kapak
Engineering Sciences
PDF İndir
EN TR

DATA TRANSFER PROCEDURES FOR A 24-BIT ADC AND AN APPLICATION FOR MAGNETIC ANOMALY MEASUREMENTS

Öz

In an experimental study, manual collection of data taken by some sensors is tedious and it requires man power in most of the cases. This causes loss of time and work. If the amount of data is significantly high, then it is better to transfer them to a computer automatically. The data collected from the sensors are analog in nature. Therefore, before the transmission, they have to be digitized by analog-to-digital converter. In this case, the resolution of the digitized value is important. In this work, the process of using the AD7714 for 24-bit conversion and the use of parallel port for transfer of digital data obtained are explained in detail. As an application, the data obtained by UGN3503 Radiometric Linear Hall Sensor is digitized by 8-bit, 12-bit and 24-bit ADCs and the results are compared. The effect of resolution on the digital data is observed.

Anahtar Kelimeler

Ayrıntılar

Birincil Dil

Türkçe

Konular

-

Bölüm

-

Yazarlar

Yayımlanma Tarihi

1 Mart 2011

Gönderilme Tarihi

29 Ağustos 2014

Kabul Tarihi

-

Yayımlandığı Sayı

Yıl 2011 Cilt: 6 Sayı: 2

DOI

https://doi.org/10.12739/nwsaes.v6i2.5000066993

IZ

https://izlik.org/JA26YS75UR

Kaynak Göster

RIS / Bibtex
APA
Ege, Y. (2011). DATA TRANSFER PROCEDURES FOR A 24-BIT ADC AND AN APPLICATION FOR MAGNETIC ANOMALY MEASUREMENTS. Engineering Sciences, 6(2), 573-587. https://doi.org/10.12739/nwsaes.v6i2.5000066993
AMA
1.Ege Y. DATA TRANSFER PROCEDURES FOR A 24-BIT ADC AND AN APPLICATION FOR MAGNETIC ANOMALY MEASUREMENTS. Engineering Sciences. 2011;6(2):573-587. doi:10.12739/nwsaes.v6i2.5000066993
Chicago
Ege, Yavuz. 2011. “DATA TRANSFER PROCEDURES FOR A 24-BIT ADC AND AN APPLICATION FOR MAGNETIC ANOMALY MEASUREMENTS”. Engineering Sciences 6 (2): 573-87. https://doi.org/10.12739/nwsaes.v6i2.5000066993.
EndNote
Ege Y (01 Mart 2011) DATA TRANSFER PROCEDURES FOR A 24-BIT ADC AND AN APPLICATION FOR MAGNETIC ANOMALY MEASUREMENTS. Engineering Sciences 6 2 573–587.
IEEE
[1]Y. Ege, “DATA TRANSFER PROCEDURES FOR A 24-BIT ADC AND AN APPLICATION FOR MAGNETIC ANOMALY MEASUREMENTS”, Engineering Sciences, c. 6, sy 2, ss. 573–587, Mar. 2011, doi: 10.12739/nwsaes.v6i2.5000066993.
ISNAD
Ege, Yavuz. “DATA TRANSFER PROCEDURES FOR A 24-BIT ADC AND AN APPLICATION FOR MAGNETIC ANOMALY MEASUREMENTS”. Engineering Sciences 6/2 (01 Mart 2011): 573-587. https://doi.org/10.12739/nwsaes.v6i2.5000066993.
JAMA
1.Ege Y. DATA TRANSFER PROCEDURES FOR A 24-BIT ADC AND AN APPLICATION FOR MAGNETIC ANOMALY MEASUREMENTS. Engineering Sciences. 2011;6:573–587.
MLA
Ege, Yavuz. “DATA TRANSFER PROCEDURES FOR A 24-BIT ADC AND AN APPLICATION FOR MAGNETIC ANOMALY MEASUREMENTS”. Engineering Sciences, c. 6, sy 2, Mart 2011, ss. 573-87, doi:10.12739/nwsaes.v6i2.5000066993.
Vancouver
1.Yavuz Ege. DATA TRANSFER PROCEDURES FOR A 24-BIT ADC AND AN APPLICATION FOR MAGNETIC ANOMALY MEASUREMENTS. Engineering Sciences. 01 Mart 2011;6(2):573-87. doi:10.12739/nwsaes.v6i2.5000066993