EN
TR
DETERMINATION OF THE RHEOLOGICAL PROPERTIES OF PA 6 PLASTIC MATERIAL ACCORDING TO THE PRESSURE AND TEMPERATURE
Abstract
Reinforcement materials add the plastics and its proportion change mechanical properties of plastics. But, mouldability of plastics is also altering, because of changing the properties of plastic. Consequently, flow properties of reinforced plastic should be necessary during molding. In this study, flow properties of Pa6 glass fiber reinforced by different rates were investigated. Pure Pa6, 10% and 20% glass fiber reinforced Pa6 are utilized in the experimental study using Melt Flow devices. Variations of flow behaviors of Pa6 are determined according to altering of temperature and pressure. In accordance with this study, the value of Melt Flow Index (MFI) of Pa6 materials is increasing as linear depends on increasing the temperature and pressure. In addition, the values of MFI are decreasing during increasing the proportion of glass fiber reinforced.
Keywords
Ayrıntılar
Birincil Dil
Türkçe
Konular
-
Bölüm
-
Yazarlar
Abdulmecit Güldas
Bu kişi benim
Yayımlanma Tarihi
1 Şubat 2010
Gönderilme Tarihi
8 Ağustos 2014
Kabul Tarihi
-
Yayımlandığı Sayı
Yıl 1970 Cilt: 5 Sayı: 1
APA
Güldas, A. (2010). PA 6 PLASTYK MALZEMESYNYN AKI? ÖZELLYKLERYNYN BASINÇ VE SICAKLIK DE?Y?YMYNE BA?LI OLARAK BELYRLENMESY. Technological Applied Sciences, 5(1), 28-39. https://doi.org/10.12739/10.12739
AMA
1.Güldas A. PA 6 PLASTYK MALZEMESYNYN AKI? ÖZELLYKLERYNYN BASINÇ VE SICAKLIK DE?Y?YMYNE BA?LI OLARAK BELYRLENMESY. Technological Applied Sciences. 2010;5(1):28-39. doi:10.12739/10.12739
Chicago
Güldas, Abdulmecit. 2010. “PA 6 PLASTYK MALZEMESYNYN AKI? ÖZELLYKLERYNYN BASINÇ VE SICAKLIK DE?Y?YMYNE BA?LI OLARAK BELYRLENMESY”. Technological Applied Sciences 5 (1): 28-39. https://doi.org/10.12739/10.12739.
EndNote
Güldas A (01 Şubat 2010) PA 6 PLASTYK MALZEMESYNYN AKI? ÖZELLYKLERYNYN BASINÇ VE SICAKLIK DE?Y?YMYNE BA?LI OLARAK BELYRLENMESY. Technological Applied Sciences 5 1 28–39.
IEEE
[1]A. Güldas, “PA 6 PLASTYK MALZEMESYNYN AKI? ÖZELLYKLERYNYN BASINÇ VE SICAKLIK DE?Y?YMYNE BA?LI OLARAK BELYRLENMESY”, Technological Applied Sciences, c. 5, sy 1, ss. 28–39, Şub. 2010, doi: 10.12739/10.12739.
ISNAD
Güldas, Abdulmecit. “PA 6 PLASTYK MALZEMESYNYN AKI? ÖZELLYKLERYNYN BASINÇ VE SICAKLIK DE?Y?YMYNE BA?LI OLARAK BELYRLENMESY”. Technological Applied Sciences 5/1 (01 Şubat 2010): 28-39. https://doi.org/10.12739/10.12739.
JAMA
1.Güldas A. PA 6 PLASTYK MALZEMESYNYN AKI? ÖZELLYKLERYNYN BASINÇ VE SICAKLIK DE?Y?YMYNE BA?LI OLARAK BELYRLENMESY. Technological Applied Sciences. 2010;5:28–39.
MLA
Güldas, Abdulmecit. “PA 6 PLASTYK MALZEMESYNYN AKI? ÖZELLYKLERYNYN BASINÇ VE SICAKLIK DE?Y?YMYNE BA?LI OLARAK BELYRLENMESY”. Technological Applied Sciences, c. 5, sy 1, Şubat 2010, ss. 28-39, doi:10.12739/10.12739.
Vancouver
1.Abdulmecit Güldas. PA 6 PLASTYK MALZEMESYNYN AKI? ÖZELLYKLERYNYN BASINÇ VE SICAKLIK DE?Y?YMYNE BA?LI OLARAK BELYRLENMESY. Technological Applied Sciences. 01 Şubat 2010;5(1):28-39. doi:10.12739/10.12739