A NEW CANISTER DESIGN FOR THE DETERMINATION OF GAS CONTENT OF COAL SEAMS BY DIRECT METHOD
Öz
Methane has caused the most disastrous mine accidents throughout the history of mining because of its flammable and explosible nature. Methane is a process gas occurred during the coalification process together with the coal substance from the decomposition of organic materials. Typically, as the thickness and the depth of coal seams increase, the gas retained within the coal and the surrounding strata also increases. Most of the methane gas retained by coal micropores in adsorbed state are released to the atmosphere as soon as mining activities starts due to the higher gas pressure available and increased permeabilities around mine openings. In order to take necessary measures against methane explosions in underground coal mining, it is necessary to determine the actual gas content of coal seams. In this study, a new design for gas measuring capsules (canisters) in direct gas measurement technique was made and then it was manufactured. The designed system was used to determine the gas content of coal samples taken from underground coal mines located in Gediz and Tavşanlı districts of Kütahya province. After the preliminary tests, it was realized that gas content of coal seams could be measured as close as to the in-situ values using the extra facilities of the canister designed and the sampling technique proposed. As a result of the experiments, it was determined that the Gediz samples had an average gas content of 0.30 m3/ton, and the Tavşanlı samples had an average gas content of 0.63 m3/ton, on as-received basis and under standard temperature and pressure conditions.
Anahtar Kelimeler
Gas content of coal seams, Canister, Core sampling
Destekleyen Kurum
TÜBİTAK (The Scientific and Technological Research Council of Turkey)
Proje Numarası
117M934
Etik Beyan
This study was supported by TÜBİTAK (The Scientific and Technological Research Council of Turkey) in scope of project number 117M934.
Teşekkür
Grateful thanks to TÜBİTAK Institution and the Scientific Committee for providing support.
Kaynakça
- AS 3980:1999 (1999). Guide to the determination of gas content of coal - Direct desorption method. Standards Association of Australia. Retrieved from https://www.standards.org.au/
- AS 3980:2016 (2016). Determination of gas content of coal and carbonaceous material-direct desorption method. Standards Association of Australia. Retrieved from https://www.standards.org.au/
- ASTM D7569-10 (2010). Standard practice for determination of gas content of coal-direct desorption method. ASTM International, West Conshohocken, PA. https://doi.org/10.1520/D7569-10
- ASTM D7569 / D7569M-10(2015)e1 (2015). Standard practice for determination of gas content of coal—direct desorption method. ASTM International, West Conshohocken, PA. https://doi.org/10.1520/D7569_D7569M-10R15E01
- Beamish, B. B. & Crosdale, P. J. (1998). Instantaneous outbursts in underground coal mines: An overview and association with coal type. International Journal of Coal Geology, 35, 27-55. https://doi.org/10.1016/S0166-5162(97)00036-0
- Bertard, C., Bruyet, B. & Gunther, J. (1970). Determination of desorbable gas concentration of coal (direct method). International Journal of Rock Mechanics and Mining Science, 7(1), 43-65. https://doi.org/10.1016/0148-9062(70)90027-6
- Camp, B. S., Kidd, J. T., Lottman, L. K., Osborne, T. E., Saulsberry, J. L., Smith, J. L., Steidl, P. F., & Stubbs, P. B. (1992). Geologic manual for the evaluation and development of coalbed methane. Gas Research Institute Topical Report GRI-91/0110.
- Diamond, W. P. & Levine, J. R. (1981). Direct method determination of the gas content of coal: Procedures and results. Washington, United States Bureau of Mines, Report of Investigations 8515.
- Diamond, W. P. & Schatzel, S. J. (1998). Measuring the gas content of coal: A review. International Journal of Coal Geology, 35, 311-331. https://doi.org/10.1016/S0166-5162(97)00040-2
- Diamond, W. P., Schatzel, S., Garcia, F. P. & Ulery, J. (2001). The modified direct method: A solution for obtaining accurate coal desorption measurements. Proceedings of International Coalbed Methane Symposium. 222-224, Alabama, United States.