Araştırma Makalesi

An Investigation Of Amorphization In Fe-Al Alloys During Mechanical Alloying

Cilt: 21 Sayı: 1 30 Haziran 2008
Hakan Gaşan , O.nuri Çelik , Nedret Aydınbeyli
PDF İndir
Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi Kapak Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi
TR EN

An Investigation Of Amorphization In Fe-Al Alloys During Mechanical Alloying

Öz


In order to determine the amorphization time, Fe and Al elemental powder mixtures with composition of Fe10.8Al89.2, Fe50Al50 and Fe80Al20 were mechanically alloyed in a Spex 8000D Mixer/Mill for up to 96 h. The characterization of Fe-Al powder mixtures was studied as a function of mechanical alloying time by X-ray diffractometry and scanning electron microscopy. A fully amorphous phase was not observed by X-ray diffraction for Fe10.8Al89.2 and Fe80Al20 even after 96 h mechanical alloying. However, X-ray diffraction observation showed that 50 h mechanical alloying of Fe50Al50 alloy resulted in a fully amorphous phase formation.







Anahtar Kelimeler

Mechanical alloying,amorphous alloys,Fe-Al

Kaynakça

  1. [1] J.S.Benjamin, “Fundamentals of mechanical alloying”, Mater.Sci. Forum, Vols.88-90, pp.1-18, 1992.
  2. [2] C.Suryanarayana, E.Ivanov and V.V.Boldyrev, “The science and technology of mechanical alloying”, Mater Sci. and Eng. A, Vols. 304-306, pp.151-158, 2001.
  3. [3] P.R.Soni, “Mechanical Alloying: Fundamentals and Applications”, Cambridge International Science Publishing, Cambridge, 1998.
  4. [4] J.J.deBarbadillo and G.D.Smith, “Recent developments and challenges in the application of mechanically alloyed, oxide dispersion strengthened alloys”, Mater.Sci.Forum, Vols.88-90, pp.167-74, 1992.
  5. [5] C.C. Koch, “The synthesis of non-equilibrium structures by ball-milling”, Mater.Sci.Forum, Vols.88-90, pp.243-262, 1992.
  6. [6] C.C. Koch, “Synthesis of nanostructured materials by mechanical milling: problems and opportunities”, Nanostructured Mater., Vol.9, pp.13–22, 1997.
  7. [7] F.H. (Sam) Froes, O.N. Senkov and E.G. Baburaj, “Synthesis of nanocrystalline materials: -an overview”, Mater Sci. and Eng. A, Vol.301, pp.44-53, 2001.
  8. [8] C.C. Koch, “Intermetallic matrix composites prepared by mechanical alloying:- a review”, Mater Sci. and Eng. A, Vol.244, pp.39-48, 1998.
  9. [9] M. Pekala and D. Oleszak, “Structural and magnetic investigation of mechanically alloyed Fe10Al90” Mater. Sci. Forum, Vols.235-238, pp. 547-552, 1997.
  10. [10] D. Oleszak and P.H. Shingu, “Amorphous Fe-Al alloys obtained by mechanical alloying”, Mater. Sci. Forum., Vols.235-238, pp.91-96, 1997.

Ayrıntılar

Birincil Dil

Türkçe

Konular

Malzeme Üretim Teknolojileri

Bölüm

Araştırma Makalesi

Yazarlar

Nedret Aydınbeyli Bu kişi benim

Yayımlanma Tarihi

30 Haziran 2008

Gönderilme Tarihi

2 Temmuz 2017

Kabul Tarihi

28 Mart 2008

Yayımlandığı Sayı

Yıl 1970 Cilt: 21 Sayı: 1

IZ

https://izlik.org/JA88HL72KM

Kaynak Göster

RIS / Bibtex
APA
Gaşan, H., Çelik, O., & Aydınbeyli, N. (2008). An Investigation Of Amorphization In Fe-Al Alloys During Mechanical Alloying. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi, 21(1), 183-192. https://izlik.org/JA88HL72KM
AMA
1.Gaşan H, Çelik O, Aydınbeyli N. An Investigation Of Amorphization In Fe-Al Alloys During Mechanical Alloying. ESOGÜ Müh Mim Fak Derg. 2008;21(1):183-192. https://izlik.org/JA88HL72KM
Chicago
Gaşan, Hakan, O.nuri Çelik, ve Nedret Aydınbeyli. 2008. “An Investigation Of Amorphization In Fe-Al Alloys During Mechanical Alloying”. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi 21 (1): 183-92. https://izlik.org/JA88HL72KM.
EndNote
Gaşan H, Çelik O, Aydınbeyli N (01 Haziran 2008) An Investigation Of Amorphization In Fe-Al Alloys During Mechanical Alloying. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi 21 1 183–192.
IEEE
[1]H. Gaşan, O. Çelik, ve N. Aydınbeyli, “An Investigation Of Amorphization In Fe-Al Alloys During Mechanical Alloying”, ESOGÜ Müh Mim Fak Derg, c. 21, sy 1, ss. 183–192, Haz. 2008, [çevrimiçi]. Erişim adresi: https://izlik.org/JA88HL72KM
ISNAD
Gaşan, Hakan - Çelik, O.nuri - Aydınbeyli, Nedret. “An Investigation Of Amorphization In Fe-Al Alloys During Mechanical Alloying”. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi 21/1 (01 Haziran 2008): 183-192. https://izlik.org/JA88HL72KM.
JAMA
1.Gaşan H, Çelik O, Aydınbeyli N. An Investigation Of Amorphization In Fe-Al Alloys During Mechanical Alloying. ESOGÜ Müh Mim Fak Derg. 2008;21:183–192.
MLA
Gaşan, Hakan, vd. “An Investigation Of Amorphization In Fe-Al Alloys During Mechanical Alloying”. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi, c. 21, sy 1, Haziran 2008, ss. 183-92, https://izlik.org/JA88HL72KM.
Vancouver
1.Hakan Gaşan, O.nuri Çelik, Nedret Aydınbeyli. An Investigation Of Amorphization In Fe-Al Alloys During Mechanical Alloying. ESOGÜ Müh Mim Fak Derg [Internet]. 01 Haziran 2008;21(1):183-92. Erişim adresi: https://izlik.org/JA88HL72KM

20873      13565         15461