Fe3O4/FeO/CoNi kompozit malzemenin sentezi ve manyetik özelliklerinin incelenmesi

Öz

Fe₃O₄/FeO/CoNikompozit malzemesi iki aşamalı proses kullanılarak üretilmiştir. Birinci aşamada, oksit prekürsörü (öncül malzeme) ıslak sentez esaslı Pechini yöntemi kullanılarak düşük sıcaklıkta üretilmiştir. İkinci aşamada prekürsör malzemesi 500, 600, 700 veya 800 °C’ye hidrojen gazı altında ısıtılarak indirgenmiştir ve metal/oksit kompozit malzemesi elde edilmiştir. Farklı sıcaklıklarda üretilen malzemelerin yapısal, morfolojik ve manyetik özellikleri X-ışını kırınımı, tarama elektron mikroskobu ve titreşen örnek manyetometresi kullanılarak incelenmiştir. 600 °C’den 700 °C’ye geçişte manyetik özelliklerde ani değişiklikler gözlenmiştir. Doygunluk mıknatıslanması iki katına çıkarken, koersif kuvvet yarıya inmiştir. Bu değişiklikler manyetik CoNi fazın amorf bir yapıdan kristal bir yapıya geçişiyle ve Fe₃O₄ fazın parçacık boyutunun yaklaşık olarak iki katına artmasıyla açıklanmıştır

Anahtar Kelimeler

• Yumuşak manyetik kompozit,Hidrojen indirgeme,Pechini

Synthesis of Fe3O4/FeO/CoNi composite material and study of its magnetic properties

Öz

Fe₃O₄/FeO/CoNi composite materials were produced using a two-step process. In the first step, oxide precursor was produced at low temperature by wet-synthesis based Pechini method. In the second step, the precursor was heated to 500, 600, 700 or 800 °C under reducing hydrogen gas and metal/oxide composite material was obtained. The structural, morphological and magnetic properties of materials produced at different temperatures were investigated using X-ray diffraction, scanning electron microscope and vibrating sample magnetometer. Sudden changes in magnetic properties were observed during transition from 600 °C to 700 °C. The saturation magnetization doubled while coercive force was halved. These changes were explained with the crystallization of magnetic CoNi phase from an amorphous state and nearly doubling of particle size of Fe₃O₄ phase.

Anahtar Kelimeler

• Soft magnetic composite,Hydrogen reduction,Pechini

Kaynakça

1. Tang Y, Zhang H, Li J, Hou G, Cao H, Wu L, Zheng G, Wu Q. “Three-dimensional macroporous Cu/Fe3O4 composite as binder-free anode for lithium-ion batteries”. Journal of Alloys and Compounds, 719, 203-209, 2017.
2. Xu G, Shi J, Dong W, Wen Y, Min X, Tang A. “One pot synthesis of a Ni/Mn3O4 nanocomposite for supercapacitors”. Journal of Alloys and Compounds, 630, 266-271, 2015.
3. Awan Z, Ghouri Z.K., Hashmi S. “Influence of Ag nanoparticles on state of the art MnO2 nanorods performance as an electrocatalyst for lithium air batteries”. International Journal of HydrogenEnergy, 43(5), 2930-2942, 2018.
4. Ouyang B, Xiong S, Zhang Y, Liu B, Li J. “The study of morphology effect of Pt/Co3O4 catalysts for higher alcohol synthesis from CO2 hydrogenation”. Applied Catalysis A: General, 543, 189-195, 2017.
5. Zhou W, Liu J, Wu X, Chen J, Zhang Y. “An effective Co/MnOx catalyst for forming light olefins via Fischer-Tropsch synthesis”. Catalysis Communications, 60, 76-81, 2015
6. Kaskow I, Decyk P, Sobczak I. “The effect of copper and silver on the properties of Au/ZnO catalyst and its activity in glycerol oxidation”. Applied Surface Science, 444, 197-207, 2018.
7. Prabhakaran T, Mangalaraja R.V., Denardin J.C. “The structural, magnetic and magnetic entropy changes on CoFe2O4/CoFe2 composites for magnetic refrigeration application”. Journal of Magnetism and Magnetic Materials, 444, 297-306, 2017.
8. Li Y, Wu T, Jin K, Qian Y, Qian N, Jiang K, Wu W, Tong G. “Controllable synthesis and enhanced microwave absorbing properties of Fe3O4/NiFe2O4/Ni heterostructure porous rods”. Applied Surface Science, 387, 190-201, 2016.

9. Lauda M, Füzer J, Kollar P, Streckova M, Bures R, Kovac J, Batkova M, Batko I. “Magnetic properties and loss separation in FeSi/MnZnFe2O4 soft magnetic composites”. Journal of Magnetism and Magnetic Materials, 411, 12-17, 2016.
10. Lak A, Kraken M, Ludwig F, Kornowski A, Eberbeck D, Sievers S, Litterst F, Weller H, Schilling M. “Size-dependent structural and magnetic properties of FeO-Fe3O4 nanoparticles”. Nanoscale, 5, 12286-12295, 2013.
11. Xiang J, Chu Y, Shen X, Zhou G, Guo Y. “Electrospinning preparation, characterization and magnetic properties of cobalt-nickel ferrite (Co1-xNixFe2O4) nanofibers”. Journal of Colloid and Interface Science, 376, 57-61, 2012.
12. Yang F, Liu D, Li W, Xiong P, Jia Y, Chen X, Yang C. “Morphology, microstructure and magnetic properties of Co2FeAl alloy nanostructures prepared at low temperature”. Journal of Alloys and Compounds, 735, 1206-1210, 2018.
13. Hautcoeur D, Lorgouilloux Y, Leriche A, Gonon M, Nait-Ali B, Smith D, Lardot V, Cambier F. “Thermal conductivity of ceramic/metal composites from preforms produced by freeze casting”. Ceramics International, 42 (12), 14077-14085, 2016.
14. Song Y, Zhang X, Yang S, Wei X, Sun Z. “Electrocatalytic performance for methanol oxidation on nanoporous Pd/NiO composites prepared by one-step dealloying”. Fuel, 181, 269-276, 2016.
15. Zhang M, Zhen Y, Sun F, Xu C. “Hydrothermally synthesized SnO2-graphene composites for H2 sensing at low operating temperature”. Materials Science and Engineering B, 209, 37-44, 2016.
16. Xia F, Jia W, Ma C, Wang J. “Synthesis of Ni–TiN composites through ultrasonic pulse electrodeposition with excellent corrosion and wear resistance”. Ceramics International, 44(1), 766-773, 2018.
17. Gupta R, Fabijanic D, Zhang R, Birbilis N. “Corrosion behaviour and hardness of in situ consolidated nanostructured Al and Al–Cr alloys produced via high-energy ball milling”. Corrosion Science, 98, 643-650, 2015.
18. Lu W, Sun D, Yu H. “Synthesis and magnetic properties of size-controlled CoNi alloy nanoparticles”. Journal of Alloys and Compounds, 546, 229-233, 2013
19. Prasad C, Sreenivasulu K, Gangadhara S, Venkateswarlu P. “Bioinspired gren synthesis of Ni/Fe3O4 magnetic nanoparticles using Moringaoleifera leaves extract: A magnetically recoverable catalyst for organic dye degradation in aqueous solution”. Journal of Alloys and Compounds, 700, 252-258, 2017.
20. Marinca T, Chicinas H, Neamtu B, Isnard O, Chicinas I. “Structural, thermal and magnetic characteristics of Fe3O4/Ni3Fe composite powder obtained by mechanosynthesis-annealing route”. Journal of Alloys and Compounds, 652, 313-321, 2015.
21. Yücel Birol. “MMM2402 Malzeme Bilimi”. http://slideplayer.biz.tr/slide/3034629/(02.02.2018).
22. Shokrollahi H, Janghorban K. “Soft magnetic composite materials”. Journal of Materials Processing Technology, 189, 1-12, 2007.