Color removal from yeast production industry wastewater using photo-fenton process

Abstract

The yeast production industry wastewaters contains high amount of chemical oxygen demand (COD), brownish color and recalcitrant organic components. In this work, one of the yeast production plant wastewaters operating in the Aegean Region, the color removal were studied with using Photo-Fenton (H₂O₂/Fe(II)/UV) oxidation processes. In this study, the Box–Wilson statistical experimental design method applied to optimization of decolorisation of the yeast production industry wastewater. For this reason, the initial oxidant and catalyst concentrations and pH of water were chosen as the experimental parameters on decolorisation. Color removal was observed during the experimental studies. Complete color removal (E=100%) was achieved with the addition of 2400 mg/L H₂O₂ and 121 mg/L Fe(II) at 3.7 pH after 120 min. of exposure to the UV irradiation.

Keywords

• Photo-Fenton oxidation,Box-Wilson,Decolorisation,Yeast production industry

Maya endüstrisi atıksularından foto-fenton yöntemi ile renk giderimi

Öz

Maya üretim endüstrisinin atığı, yüksek miktarda kimyasal oksijen ihtiyacı (KOİ), azot, koyu renk ve biyolojik olarak parçalanmayan organik bileşikler içermektedir. Bu çalışmada, Ege Bölgesi’nde faaliyet gösteren bir maya sanayinin atıksularının, renk giderimi Foto-Fenton (H₂O₂/Fe (II)/UV) oksidasyon yöntemi kullanılarak arıtılmaya çalışılmıştır. Box-Wilson istatistiksel deneysel tasarım yöntemi kullanılarak başlangıç oksidan ve katalizör konsantrasyonları ve suyun pH'sı gibi bazı çalışma parametrelerinin renk giderme üzerindeki etkileri araştırılmıştır. Çalışma süresince renk giderimi izlenmiş ve komple renk giderimi (E=%100) 120 dk. sonra, 3.7 pH'da
2400 mg/L H₂O₂ ve 121 mg/L Fe (II) ilavesinin olduğu UV oksidasyonu işlemi sonucunda elde edilmiştir.

Anahtar Kelimeler

• Foto-Fenton oksidasyou,Box-Wilson,Renk giderimi,Maya endüstrisi

Kaynakça

1. Gengec E, Kobya M, Demirbas E, Akyol A, Oktor K. “Optimization of baker's yeast wastewater using response surface methodology by electrocoagulation”. Desalination, 286, 200-209, 2012.
2. Sowmeyan R, Swaminathan G. “Effluent treatment process in molasses-based distillery industries: a review”. Journal Hazard Mater, 152(2), 453-464, 2008.
3. Gladchenko M, Starostina E, Shcherbakov S, Versprille B, Kalyuzhnyi S. “Combined biological and physico-chemical treatment of baker's yeast wastewater including removal of coloured and recalcitrant to biodegradation pollutants”. Water Science and Technology, 50, 67-76, 2004.
4. Kalyuzhnyi S, Gladchenko M, Starostina E, Shcherbakov S, Versprille A. “Combined biological and physico-chemical treatment of baker's yeast wastewater”. Water Science and Technology., 52, 175183 2005.
5. Pirsaheba M, Rostamifar M, Mansouria AM, Zinatizadehd AAL, Sharafie K. “Performance of an anaerobic baffled reactor (ABR) treating high strength baker’s yeast manufacturing wastewater”. Journal of the Taiwan Institute of Chemical Engineers, 47, 137-146 2015.
6. Baycan NP, Akten D. “Response surface methodological approach and the kinetic study for the assessment of the photodegradation of a pulp mill effluent with H2O2/Fe(III)/Solar UV”. FEB, 20(6), 1390-1398, 2011.
7. Solozhenko EG, Soboleva NM, Goncharuk VV. “Decolorisation of azo dye solutions by Fenton’s oxidation”. Water Research, 29, 2206-2215, 1995.
8. Asaithambi P, Sajjadi B, Abdul Aziz AR. “Ozone (O3) and sono (US) based advanced oxidation processes for the removal of color, COD and determination of electrical energy from landfill leachate”. Separation and Purification Technology, 172, 442-450, 2017.

9. Gengec E. “Color removal from anaerobic/aerobic treatment effluent of bakery yeast wastewater by polyaniline/beidellite composite materials”. Journal of Environmental Chemical Engineering, 3, 2484-2290, 2015.
10. Baycan NP, Uyguner CD, Bekbölet M. “Response surface methodological approach for the assessment of the photocatalytic degradation of NOM". Journal of Photochemistry and Photobiology A: Chemistry, 225(1), 26-35, 2011.
11. Catalkaya EC, Sengül F. “Application of Box–Wilson experimental design method for the photodegradation of bakery’s yeast industry with UV/H2O2 and UV/H2O2/Fe(II) process”. Journal of Hazardous Materials B, 128, 201-207, 2006.
12. ASTM International standards. “Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)”. ASTM, D212909-17, Washington, D.C, 2017.
13. Asaithambi P, Sajjadi B, Abdul Aziz AR. “Integrated ozone–photo–Fenton process for the removal of pollutant from industrial wastewater”. Chinese Journal of Chemical Engineering, 25, 516-525, 2017.