Asidik boyaların poli(akrilamid-vinilimidazol) hidrojel kullanılarak atık sulardan giderimi

Öz

Bu çalışmada, asidik bir boyarmadde olan Asit Mavi 193 (Isolan Dark Blue 2S-GL-03)’ün sulu çözeltiden yeni sentezlenen poli(Akrilamid-Vinilimidazol) (poli(AAm-VI)) hidrojeli kullanılarak kesikli sistemde adsorpsiyon ile giderimi incelenmiştir. Sentezlenen hidrojelin SEM, FTIR ve TGA yöntemleri ile karakterizasyonu yapılmıştır. Adsorpsiyon prosesi üzerine boyarmaddenin başlangıç derişimi, çözeltinin başlangıç pH değeri, hidrojel miktarı, temas süresi ve karıştırma hızının etkileri araştırılmıştır. Hidrojel miktarı arttığı zaman adsorplanan boya miktarının arttığı belirlenmiştir. En fazla adsorpsiyon pH 1.5 değerinde meydana geldiği gözlenmiştir. Başlangıç Asit Mavi 193 boyar madde derişimi, çözeltinin başlangıç pH değeri, karıştırma hızı ve hidrojel miktarı sırasıyla 250 mg/L, 1.5, 600 rpm ve 2 g/L iken 90 dk. işlem süresi sonunda elde edilen giderim yüzdesi %99.8’dir. Boyarmaddenin poli(AAm-VI) hidrojeli ile arasındaki ilişkiyi ifade etmek için Langmuir, Freundlich, Temkin ve Dubinin-Radushkevich adsorpsiyon izotermeleri kullanılmış ve kinetik analizleri yapılmıştır. Korelasyon katsayısının (R2) değeri, farklı modellerin en iyi model uyumu göstergesi olarak kullanılmış ve denge verilerinin R2’leri büyük olan Freundlich izoterm modeline ve yalancı ikinci mertebe kinetik modeline uyduğu belirlenmiştir. Sonuçlar, poli (AAm-VI) hidrojelin, asidik boyalarının kirli sudan uzaklaştırılması için uygun bir sorbent olarak kullanılabileceğini göstermiştir.

Anahtar Kelimeler

• Adsorpsiyon,Asidik boyarmadde,Hidrojel,Asit mavi 193,Atıksu arıtımı

Removal of acid dyes from wastewater using poly(acrylamide-vinylimidazole) hydrogel

Öz

In this study, the removal of acidic dyestuff, Acid Blue 193 (Isolan Dark Blue 2S-GL-03) from the aqueous solution by using the newly synthesized poly (Acrylamide-Vinimidimidazole) (poly (AAm-VI)) hydrogel in the batch system was investigated by adsorption. The synthesized hydrogel was characterized by SEM, FTIR and TGA methods. The effects of the initial concentration of dyestuff , initial pH value of solution, hydrogel dosage, contact time and stirring speed on the adsorption process were studied. It was determined that the amount of the adsorbed dyestuff increased when hydrogel dosage increased. The maximum adsorption was observed to occur at pH 1.5. While the initial solution concentration, initial pH value, contact time, stirring speed, and hydrogel dosage were 250 mg/L, 1.5, 90 min. 600 rpm, and 2 g/L, respectively, the efficiency of dye adsorption on hydrogel was 99.8%. Langmuir, Freundlich, Temkin and Dubinin-Radushkevich adsorption isotherms were used to express the relationship of dyestuff with poly (AAm-VI) hydrogel and kinetic analyzes were performed. The correlation coefficient (R2) was used as an indicator of the best model fit of the different models and it was determined that the equilibrium data fit the Freundlich isotherm model and the pseudo second order kinetic model which have large R2 values. The results showed that poly (AAm-VI) hydrogel could be used as a suitable sorbent to remove acidic dyes from contaminated water.

Anahtar Kelimeler

• Adsorption,Acidic dyestuff,Hydrogel,Acid blue 193,Wastewater treatment

Kaynakça

1. Robinson T, Mcmullan G, Marchant R, Nigam P. “Remediation of dyes in textile effluent: a critical review on current treatment technologies with a proposed alternative”. Bioresource Technology, 77(3), 247-255, 2001.
2. Vijayaraghavan K, Yun YS. “Biosorption of CI Reactive Black 5 from aqueous solution using acid-treated biomass of brown seaweed Laminaria sp.”. Dyes and Pigments, 76(3), 726-732, 2008.
3. Çelekli A, Yavuzatmaca M, Bozkurt H. “Kinetic and equilibrium studies on the adsorption of reactive red 120 from aqueous solution on Spirogyra majuscula”. The Chemical Engineering Journal, 152(1), 139-145, 2009.
4. Dulman V, Cucu-Man SM. “Sorption of some textile dyes by beech wood sawdust”. Journal of Hazardous Materials, 162, 1457-1464, 2009.
5. Jesus AMD, Romão LPC, Araújo BR, Costa AS, Marques JJ. “Use of humin as an alternative material for adsorption/desorption of reactive dyes”. Desalination, 274(1), 13-21, 2011.
6. Dizge N, Aydiner C, Demirbaş E, Kobya M, Kara S. “Adsorption of reactive dyes from aqueous solutions by fly ash: Kinetic and equilibrium studies”. Journal of Hazardous Materials, 150, 737-746, 2008.
7. O’Neill C, Hawkes FR, Hawkes DL, Lourenco N, Pinheiro HM, Delee W. “Colour in textile effluents - sources, measurement, discharge consents and simulation: A review”. Journal of Chemical Technology and Biotechnology, 74(11), 1009-1018, 1999.
8. Çelekli A, İlgün G, Bozkurt H. “Sorption equilibrium, kinetic, thermodynamic, and desorption studies of Reactive Red 120 on Chara contraria”. Chemical Engineering Journal, 191, 228-235, 2012.

9. İnal M, Çağdaş TB, Yiğitoğlu M. “ Akrilamid-krotonik asit iç içe geçmiş ağ yapılı hidrojellerinin metilen mavisinin adsorpsiyonunda kullanımı”. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi, 9(2), 120-130, 2017.
10. Hsu TC. “Adsorption of an acid dye onto coal fly ash”. Fuel, 87, 3040-3045, 2008.
11. Özcan AS, Erdem B, Özcan A. “Adsorption of Acid Blue 193 from aqueous solutions onto BTMA-bentonite”. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 266, 73-81, 2005.
12. Erdem M, Yüksel E, Tay T, Çimen Y, Türk H. “Synthesis of novel methacrylate based adsorbents and their properties towards p-nitrophenol from aqueous solution”. Journal of Colloid Interface Science, 333(1), 40-48, 2009.
13. Karadağ E, Saraydin D, Güven Ö. “Cationic dye adsorption by acrylamide/itaconic acid hydrogels in aqueous solutions”. Polymers for Advanced Technologies, 8(9), 574-578, 1997.
14. Tang Q, Wu J, Sun H, Fan S, Hu D, Lin J. “Synthesis of polyacrylate/poly(ethylene glycol) hydrogel and its adsorption properties for heavy metal ions and dye”. Polymer Composites, 30(8), 1183-1189, 2009.
15. Boztepe C, Şölener M, Yüceer M, Künkül A, Kabasakal OS. “Modeling of swelling behaviors of acrylamide-based polymeric hydrogels by intelligent system”. Journal of Dispersion Science and Technology, 36,1647-1656, 2015.
16. Boztepe C, Tosun E, Bilenler T, Şişlioğlu K. “The synthesis, characterization and investigation of antimicrobial ınhibition kinetics of acrylamide based hydrogel-silver nanocomposite system”. Third International Chemical Engineering and Chemical Technologies Conference, Istanbul, Turkey, 30 November - 1 December 2015.
17. Saraydın D, Karadag E, Güven O. “Use of superswelling acrylamide/maleic acid hydrogels for monovalent cationic dye adsorption” Journal of Applied Polymer Science, 79(10), 1809-1815, 2001.
18. Duran S, Şolpan, D, Güven O. “Synthesis and characterization of acrylamide-acrylic acid hydrogels and adsorption of some textile dyes”. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 151(1-4), 196-199, 1999.
19. Genc F, Uzun C, Guven O. “Quaternized poly(1-vinylimidazole) hydrogel for anion adsorption”. Polymer Bulletin, 73(1), 179-190, 2016.
20. Erdem B. “Synthesis and characterizatıon studies of a series of N-vinylimidazole-based hydrogel”. Anadolu Üniversitesi Bilim ve Teknoloji Dergisi A- Uygulamalı Bilimler ve Mühendislik Dergisi, 17(5), 974-983, 2016.
21. Tu J, Zhou J, Wang CF, Zhang Q, Chen S. “Facile synthesis of N-vinylimidazole-based hydrogels via frontal polymerization and investigation of their performance on adsorption of copper ions”. Journal of Polymer Science Part A: Polymer Chemistry, 48(18), 4005-4012, 2010.
22. Molina MJ, Gomez-Anton MR, Rivas BL, Maturana HA, Pierola IF. “Removal of Hg(II) from acid aqueous solutions by poly(N-vinylimidazole) hydrogel”. Journal of Applied Polymer Science, 79(8), 1467-1475, 2001.
23. Boztepe C, Künkül A, Yaşar S, Gürbüz N, “Heterogenization of homogeneous NHC-Pd-pyridine catalysts and investigation of their catalytic activities in Suzuki-Miyaura coupling reactions”. Journal of Organometallic Chemistry, 872, 123-134, 2018.
24. Deligkaris K, Tadele, ST, Olthuis W, van den Berg, A. “Hydrogel-based devices for biomedical applications”. Sensors and Actuators B: Chemical, 147(2), 765-774, 2010.
25. Herber S, Olthuis W, Bergveld P, van den Berg A. “Exploitation of a pH sensitive hydrogel disk for CO2 detection”. Sensors and Actuators B: Chemical, 103, 284-289, 2004.
26. Zhang Y, Ji HF, Snow D, Sterling R, Brown GM. “A pH sensor based on a microcantilever coated with intelligent hydrogel”. Instrumentation Science and Technology, 32(4), 361-369, 2004.
27. Didehban K, Hayasi M, Kermajani F. “Removal of anionic dyes from aqueous solutions using polyacrylamide and polyacrylic acid hydrogels”. Korean Journal of Chemical Engineering, 34(4), 1177-1186, 2017.
28. Oladipo AA, Gazi M, Samaneh-Samandari S. “Adsorption of anthraquinone dye onto eco-friendly semi-IPN biocomposite hydrogel: Equilibrium isotherms, kinetic studies and optimization“, Journal of Taiwan Institute of Chemical Engineers, 45, 653-664, 2014.
29. Amin MT, Alazba AA, Shafiq M. “Adsoptive removal of reactive black 5 from wastewater using bentonite clay: isotherms, kinetics and thermodynamics”. Sustainability, 7, 15302-15318, 2015.
30. Bai H, Zhang Q, He T, Zheng G, Zhang G, Zheng L, Ma S. “Adsorption Dynamics, diffusion and isotherm models of poly(NIPAm/LMSH) nanocomposite hydrogels fort he removal of anionic dye Amaranth from aqueous solution“, Applied Clay Science, 124-125, 157-166, 2016.
31. Zhu HY, Jiang R, Xiao L. “Adsorption of an anionic azo dye by chitosan/kaolin/γ-Fe2O3 composites”. Applied Clay Sciences, 48(3), 522-526, 2010.
32. Patel YN, Patel MP. “A new fast swelling poly[DAPB-co-DMAAm-co-AASS] superadsorbent hydrogel for removal of anionic dyes from water”. Chinese Chemistry Letters, 24(11), 1005-1007, 2013.
33. Pakdel PM, Peighambardoust SJ. “Review on recent progress in chitosan-based hydrogels for wastewater treatment application”. Carbonhydrate Polymers, 201, 264-279, 2018.