Energy applications and studies for healthcare facilities- a systematic literature review

Öz

Healthcare facilities are one of the main buildings that have great energy consumption. This situation reveals the need for good energy planning and management based on the principles of energy efficiency as well as cost-effectiveness for these facilities. In this context, a literature review, between 2006 and 2018, on energy applications realized for healthcare facilities, such as energy planning, energy management, energy efficiency, selection of alternative energy technologies, using of different energy sources, energy renovation/refurbishment activities have been executed. A Systematic Literature Review (SLR) method was used, where research questions and searching stages were defined. This review study has been conducted on energy and healthcare relevant keywords in the Scopus database. After a thorough analysis of the papers retrieved from the Scopus database, a total of 176 primary articles has been categorized according to their relations with energy efficiency, energy planning, and energy management. In each category, major research issues, findings, and important aspects have been analyzed and reported. With this analyzing, developments in the existing literature have been put forth and potential areas for future research have been suggested. Findings pointed out that energy-related studies for healthcare facilities are between trending topics. For ensuring minimum cost and maximum utility for energy, the articles using the solution methods of operations research and engineering economics regarding alternative energy applications are especially popular. As a solution method for energy problems, Mixed Integer Linear Programming (MILP) is widely used in 20 studies. On the other hand, cogeneration and trigeneration applications, which minimize energy costs and waste energy and are very suitable for large buildings, are the most frequently studied alternative energy applications with 83 articles.

Anahtar Kelimeler

• Energy
• Energy management
• Hospital
• Healthcare

Kaynakça

1. Internet Page. “European Comission- Topics – Energy”. https://ec.europa.eu/energy/topics/energy efficiency/energy-efficient-buildings/energy performance-buildings-directive_en (15.10.2016).
2. Teke A, Timur O. “Overview of energy savings and efficiency strategies at the hospitals”. International Journal of Social, Behavioral, Educational, Economic, Business and Industrial Engineering, 8(1),242-248, 2014.
3. Isa NM, Das HS, Tan CW, Yatim AHM. “A techno-economic assessment of a combined heat and power photovoltaic/fuel cell/battery energy system in Malaysia hospital”. Energy, 112, 75-90, 2016.
4. Gimelli A, Muccillo M. “Optimization criteria for cogeneration systems: Multi-objective approach and application in an hospital facility”. Applied Energy, 104, 910-923, 2013.
5. Kavvadias KC, Tosios AP, Maroulis ZB. “Design of a combined heating, cooling and power system: Sizing, operation strategy selection and parametric analysis”. Energy Conversion and Management; 51, 833-845, 2010.
6. Guo L, Liu W, Cai J, Hong B, Wang C. “A two-stage optimal planning and design method for combined cooling, heat and power microgrid system”. Energy Conversion and Management, 74, 433-445, 2013.
7. Cardona E, Piacentino E. “Optimal design of CHCP plants in the civil sector by thermoeconomics”. Applied Energy, 84, 729-748, 2007.
8. Arcuri P, Florio G, Fragiacomo P. “A mixed integer programming model for optimal design of trigeneration in a hospital complex”. Energy, 32, 1430-1447, 2007.

9. Zheng CY, Wu JY, Zhai XQ. “A novel operation strategy for CCHP systems based on minimum distance”. Applied Energy, 128, 325-335, 2014.
10. Facci AL, Andreassi L, Martini F, Ubertini S. “Optimization of CHCP operation strategy: Cost vs primary energy consumption minimization”. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), USA, 15-21 November 2013.
11. Shariatzadeh OJ, Refahi AH, Rahmani M, Abolhassani SS. “Economic optimisation and thermodynamic modelling of SOFC tri-generation system fed by biogas”. Energy Conversion and Management, 105, 772-781, 2015.
12. Kolokotsa D, Tsoutsos T, Papantoniou S. “Energy conservation techniques for hospital buildings”. Advances in Building Energy Research, 6(1),159-172, 2012.
13. Marshall B, Rashid F. “The Ottawa Hospital Energy Management Program”. Journal of the Association of Energy Engineers, 110(3), 65-80, 2013.
14. Bonnema E, Pless S, Doebber I. “Advanced Energy Design Guide for Small Hospitals and Healthcare Facilities”. Journal of Healthcare Engineering, 1(2), 277-196, 2010.
15. Martini I, Discoli C, Rosenfeld E. “Methodology developed for the energy-productive diagnosis and evaluation in health buildings”. Energy and Buildings, 39, 727-735, 2007.
16. Congradac V, Prebiracevic B, Jorgovanovic N, Stanisic D. “Assessing the energy consumption for heating and cooling in hospitals”. Energy and Buildings, 48, 146-154, 2012.
17. Kitchenham B, Charters S. Guidelines for performing systematic literature reviews. Softw Eng 2007.
18. Internet Page. “Elsevier-Solutions-Scopus”. https://www.elsevier.com/solutions/scopus (15.10.2016)
19. Mavrotas G, Florios K, Vlachou D. “Energy planning of a hospital using Mathematical Programming and Monte Carlo simulation for dealing with uncertainty in the economic parameters”. Energy Conversion and Management, 51, 722-731, 2010.
20. Costa A, Fichera A. “A mixed-integer linear programming (MILP) model for the evaluation of CHP system in the context of hospital structures”. Applied Thermal Engineering; 71, 921-929, 2014.
21. Oh SD, Lee HJ, Jung JY, Kwak HY. “Optimal planning and economic evaluation of cogeneration system”. Energy, 32, 760-771, 2007.
22. Yoshida S, Ito K, Yokoyama R. “Sensitivity analysis in structure optimization of energy supply systems for a hospital”. Energy Conversion and Management, 48, 2836-2843, 2007.
23. Chinese D, Meneghetti A, Nardin G, Simeoni P. “From hospital to municipal cogeneration systems: An Italian case study”. International Journal of Energy Resources, 31, 829-848, 2007.
24. Lozano MA, Ramos JC, Carvalho M, Serra LM. “Structure optimization of energy supply systems in tertiary sector buildings”. Energy and Buildings, 41, 1063-1075, 2009.
25. Carvalho M, Serra LM, Lozano MA. “Optimal synthesis of trigeneration systems subject to environmental constraints”. Energy, 36, 3379-3790, 2011.
26. Renedo CJ, Ortiz A, Manana M, Silio D, Pe´rez S. “Study of different cogeneration alternatives for a Spanish hospital center”, Energy and Buildings, 38, 484-490, 2006.
27. Wu Q, Ren H, Gao W, Ren J. “Multi-objective optimization of a distributed energy network integrated with heating interchange”. Energy, 109, 353-364, 2016.
28. Romero A, Carvalho M, Millar DL. “Application of a polygeneration optimization technique for a hospital in Northern Ontario”. Transactions of the Canadian Society for Mechanical Engineering, 38, 45-62, 2014.
29. Carvalho M, Lozano MA, Ramos J, Serra LM. “Synthesis of trigeneration systems: Sensitivity analyses and resilience”. The Scientific World Journal, 2013. doi: org/10.1155/2013/604852.
30. Mavrotas G, Diakoulaki D, Florios K, Georgiou P. “A mathematical programming framework for energy planning in services’ sector buildings under uncertainty in load demand: The case of a hospital in Athens”. Energy Policy, 36, 2415-2429, 2008.
31. Lozano MA, Carvalho M, Serra LM. “Allocation of economic costs in trigeneration systems at variable load conditions”. Energy and Buildings, 43, 2869-2881, 2011.
32. Carvalho M, Lozano MA, Serra LM. “Multicriteria synthesis of trigeneration systems considering economic and environmental aspects”. Applied Energy, 91, 245-254, 2012.
33. Rezvan AT, Gharneh NS, Gharehpetian GB. “Robust optimization of distributed generation investment in buildings”. Energy, 48, 455-463, 2012.
34. Akbari K, Nasiri MM, Jola F, Ghaderi SF. “Optimal investment and unit sizing of distributed energy systems under uncertainty: A robust optimization approach”. Energy and Buildings, 85, 275-286, 2014.
35. Yang Y, Zang S, Xiao Y. “Optimal design of distributed energy resource systems based on two-stage stochastic programming”. Applied Thermal Engineering, 110, 1358-1370, 2017.
36. Pagliarini G, Corradi C, Rainieri S. “Hospital CHCP system optimization assisted by TRNSYS building energy simulation tool”. Applied Thermal Engineering, 44, 150-158, 2012.
37. Fraile JC, San-José J, González-Alonso A. “A Boiler room in a 600-bed hospital complex: study, analysis, and implementation of energy efficiency improvements”. Energies, 7, 3282-3303, 2014.
38. Wang T, Li X, Liao PC, Fang D. “Building energy efficiency for public hospitals and healthcare facilities in China: Barriers and drivers”. Energy, 103, 588-597, 2016.
39. Nagao H, Uemichi A, Yamasaki Y, Kaneko S. “Proposal of a decision scheme for installing a cogeneration system considering disaster risks”. Applied Thermal Engineering, 114, 1414-1423, 2017.
40. Kavvadias KC, Maroulis ZB. “Multi-objective optimization of a trigeneration plant”. Energy Policy, 2010, 38, 945-954.
41. Al-Mansour F, Kozˇuh M. “Risk analysis for CHP decision making within the conditions of an open electricity market” Energy, 32, 1905-1916, 2007.
42. Papantoniou S, Kolokotsa D, Kalaitzakis K. “Building optimization and control algorithms implemented in existing BEMS using a web based energy management and control system”. Energy and Buildings, 98, 45-55, 2015.
43. Muccillo M, Gimelli A, Sannino R. “Multi-objective optimization and sensitivity analysis of a cogeneration system for a hospital facility”. Energy Procedia, 81, 585-596, 2015.
44. Ascione F, Bianco N, De Stasio C, Mauro GM, Vanoli GP. “Multi-stage and multi-objective optimization for energy retrofitting a developed hospital reference building: A new approach to assess cost-optimality”. Applied Energy, 174, 37-68, 2016.
45. Cristóbal-Monreal IR, Dufo-López R. “Optimisation of photovoltaic-diesel-battery stand-alone systems minimising system weight”. Energy Conversion and Management, 119, 279-288, 2016.
46. Munuswamy S, Nakamura K, Katta A. “Comparing the cost of electricity sourced from a fuel cell-based renewable energy system and the national grid to electrify a rural health centre in India: A case study”. Renewable Energy, 36, 2978-2983, 2011.
47. Al-Karaghouli A, Kazmerski LL. “Optimization and life-cycle cost of health clinic PV system for a rural area in southern Iraq using HOMER software”. Solar Energy, 84, 710-714, 2010.
48. Dezfouli MMS, Moghimi S, Azizpour F, Mat S, Sopian K. “Feasibility of Saving Energy by Using VSD in HVAC System, A Case Study of Large Scale Hospital in Malaysia”. WSEAS Transactions on Environment and Development, 10, 15-25, 2014.
49. Dufo-López R, Pérez-Cebollada E, Bernal-Agustín JL, Martínez-Ruiz I. “Optimisation of energy supply at off-grid healthcare facilities using Monte Carlo simulation”. Energy Conversion and Management, 113, 321-330, 2016.
50. Duki EA. “Optimal sizing of CHP for residential complexes by two-stage stochastic programming”. 2012 Proceedings of 17th Conference on Electrical Power Distribution, Iran, EPDC; 2-3 May 2012.
51. Li CZ, Shi YM, Huang XH. “Sensitivity analysis of energy demands on performance of CCHP system”. Energy Conversion and Management, 49, 3491-3497, 2008.
52. Azit AH, Nor KM. “Optimal sizing for a gas-fired grid-connected cogeneration system planning”. IEEE Transactions on Energy Conversion, 24(4), 950-958, 2009.
53. Jing R, Wang M, Wang W, Brandon N, Li N, Chen J, Zhao Y. “Economic and environmental multi-optimal design and dispatch of solid oxide fuel cell based CCHP system”. Energy Conversion and Management, 154, 365-379, 2017.
54. Bagnasco A, Fresi F, Saviozzi M, Silvestro F, Vinci A. “Electrical consumption forecasting in hospital facilities: An application case”. Energy and Buildings, 103, 261-270, 2015.
55. Wu Q, Ren H, Gao W, Ren J. “Multi-criteria assessment of combined cooling, heating and power systems located in different regions in Japan”. Applied Thermal Engineering, 73, 660-670, 2014.
56. Feng L, Jiang XZ, Chen J, Ma Y, Shi L. “Time-based category of combined cooling, heating and power (CCHP) users and energy matching regimes”. Applied Thermal Engineering, 127, 266-274, 2017.
57. Biglia A, Carreda FV, Fabrizio E, Filippi M, Mandas N. “Influence analysis of building energy demands on the optimal design and performance of CCHP system by using statistical analysis”. Energy and Buildings, 153, 297-316, 2017.
58. Jing R, Wang M, Brandon N, Zhao Y. “Multi-criteria evaluation of solid oxide fuel cell based combined cooling heating and power (SOFC-CCHP) applications for public buildings in China”. Energy, 141, 273-289, 2017.
59. Wu Q, Ren H, Gao W, Ren J. “Modeling and optimization of distributed energy supply network with power and hot water interchanges”. Applied Thermal Engineering, 94, 635-643, 2016.
60. Buonomano A, Calise F, Ferruzzi G, Vanoli L. “A novel renewable polygeneration system for hospital buildings: Design, simulation and thermo-economic optimization”. Applied Thermal Engineering, 67, 43-60, 2014.
61. Kayo G, Hasan A, Siren K. “Energy sharing and matching in different combinations of buildings, CHP capacities and operation strategy”. Energy and Buildings, 82, 685-695, 2014.
62. Pavlas M, Stehlik P, Oral J, Sˇikula J. “Integrating renewable sources of energy into an existing combined heat and power system”. Energy, 31, 2499-2511, 2006.
63. Taseli BK, Kilkis B. “Ecological sanitation, organic animal farm, and cogeneration: Closing the loop in achieving sustainable development-A concept study with on-site biogas fueled trigeneration retrofit in a 900-bed university hospital”. Energy and Buildings, 129, 102-119, 2016.
64. Kantola M, Saari A. “Renewable vs. traditional energy management solutions-a finnish hospital facility case”. Renewable Energy, 57, 539-545, 2013.
65. Malico I, Carvalhinho AP, Tenreiro J. “Design of a trigeneration system using a high temperature fuel cell”. International Journal of Energy Resources, 33, 144-151, 2009.
66. Fabrizio E. “Feasibility of polygeneration in energy supply systems for health-care facilities under the Italian climate and boundary conditions”. Energy for Sustainable Development, 15, 92-103, 2011.
67. Bizzarri G, Morini GL. “New technologies for an effective energy retrofit of hospitals”. Applied Thermal Engineering, 26, 161-169, 2006.
68. Ruan Y, Liu Q, Zhou W, Firestone R, Gao W, Watanabe T. “Optimal option of distributed generation technologies for various commercial buildings”. Applied Energy, 86, 1641-1653, 2009.
69. Bizzarri G. “On the size effect in PAFC grid-connected plant”. Applied Thermal Engineering, 26, 1001-1007, 2006.
70. Rasouli M, Akbari S, Simonson CJ, Besant RW. “Energetic, economic and environmental analysis of a health-care facility HVAC system equipped with a run-around membrane energy exchanger”. Energy and Buildings, 69, 112-121, 2014.
71. Buonomano A, Calise F, Ferruzzi G, Palombo A. “Dynamic energy performance analysis: Case study for energy efficiency retrofits of hospital buildings”. Energy, 78, 555-572, 2014.
72. Principi P, Fioretti R, Carbonari A, Lemma M. “Evaluation of energy conservation opportunities through Energy Performance Contracting: A case study in Italy”. Energy and Buildings, 128, 886-899, 2016.
73. Mohammadpour A, Anumba CJ, Messner JI. “Integrated Framework for Patient Safety and Energy Efficiency in Healthcare Facilities Retrofit Projects”. Health Environments Research and Design Journal, 9, 68-85, 2016.
74. Saidur R, Hasanuzzaman M, Yogeswaran S, Mohammed H.A, Hossain M.S. “An end-use energy analysis in a Malaysian public hospital”. Energy, 35, 4780-4785, 2010.
75. Morgenstern P, Li M, Raslan R, Ruyssevelt P, Wright A. “Benchmarking acute hospitals: Composite electricity targets based on departmental consumption intensities”. Energy and Buildings, 118, 277-290, 2016.
76. Kramer L, Rizzo V. “Development of a Comprehensive Energy Evaluation Program For a Medical Center in the Northeast: A Case Study. Energy Engineering”. Journal of the Association of Energy Engineers, 112(2), 57-79, 2015.
77. Karakasli E, Oztop HF, Hepbasli A. “Performance assessment of a polyclinic heating and cooling system in a hospital building”. International Journal of Exergy, 21, 70-86, 2016.
78. Khodakarami J, Knight I, Nasrollahi N. “Reducing the demands of heating and cooling in Iranian hospitals”. Renewable Energy, 34, 1162-1168, 2009.
79. Alexis GK, Liakos P. “A case study of a cogeneration system for a hospital in Greece. Economic and environmental impacts”. Applied Thermal Engineering, 54, 488-496, 2013.
80. Ziher D, Poredos A. “Economics of a trigeneration system in a hospital”. Applied Thermal Engineering, 26, 680-687, 2006.
81. Cardona E, Piacentino A, Cardona F. “Matching economical, energetic and environmental benefits: An analysis for hybrid CHCP-heat pump systems”. Energy Conversion and Management, 47, 3530-3542, 2006.
82. Bujak J. “Heat consumption for preparing domestic hot water in hospitals”. Energy and Buildings, 42, 1047-1055, 2010.
83. Murray J, Pahl O, Burek S. “Evaluating the scope for energy-efficiency improvements in the public sector: Benchmarking NHSScotland's smaller health buildings”. Energy Policy, 36(3), 1236-1242, 2008.
84. Carbonari A, Fioretti R, Lemma M, Principi P. “Managing energy retrofit of acute hospitals and community clinics through EPC contracting: the MARTE Project”. Energy Procedia, 78, 1033-1038, 2015.
85. Capozzoli A, Piscitelli MS, Neri F, Grassi D, Serale G. “A novel methodology for energy performance benchmarking of buildings by means of Linear Mixed Effect Model: The case of space and DHW heating of out-patient Healthcare Centres”. Applied Energy, 171, 592-607, 2016.
86. Sanz-Calcedo JG, Blázquez FC, Rodríguez FL, “Ruiz-Celma A. Influence of the number of users on the energy efficiency of health centres”. Energy and Buildings, 43, 1544-1548, 2011.
87. Bujak J. “Mathematical modelling of a steam boiler room to research thermal efficiency”. Energy, 33, 1779-1787, 2008.
88. Yun H, Li W. “Optimization and Analysis of Distributed Energy System with Energy Storage Device”. Energy Procedia, 12, 958-965, 2011.
89. Cardona E, Piacentino E. “A new approach to exergoeconomic analysis and design of variable demand energy systems”. Energy, 31, 490-515, 2006.
90. Tsoutsos T, Aloumpi E, Gkouskos Z, Karagiorgas M. “Design of a solar absorption cooling system in a Greek hospital”. Energy and Buildings, 42, 265-272, 2010.
91. Ahmadzadehtalatapeh M, Yau YH. “The application of heat pipe heat exchangers to improve the air quality and reduce the energy consumption of the air conditioning system in a hospital ward-a full year model simulation”. Energy and Buildings, 43, 2344-2355, 2011.
92. Vanhoudt D, Desmedt J, Van Bael J, Robeyn N, Hoes H. “An aquifer thermal storage system in a Belgian hospital: Long-term experimental evaluation of energy and cost savings”. Energy and Buildings, 43, 3657-3665, 2011.
93. Ascione F, Bianco N, De Masi RF, Vanoli GP. “Rehabilitation of the building envelope of hospitals: Achievable energy savings and microclimatic control on varying the HVAC systems in Mediterranean climates”. Energy and Buildings, 60, 125-138, 2013.
94. Congradac V, Prebiracevic B, Petrovacki N. “Methods for assessing energy savings in hospitals using various control techniques”. Energy and Buildings, 69, 85-92, 2014.
95. Boschiero do Espirito Santo D. “An energy and exergy analysis of a high-efficiency engine trigeneration system for a hospital: A case study methodology based on annual energy demand profiles”. Energy and Buildings, 76, 185-198, 2014.
96. Silveira JL, Lamas WdQ, Tuna CE, Villela IAdC, Miro LS. “Ecological efficiency and thermoeconomic analysis of a cogeneration system at a hospital”. Renewable and Sustainable Energy Reviews, 1, 2894-2906, 2012.
97. Moradi MH, Hajinazari M, Jamasb S, Paripour M. “An energy management system (EMS) strategy for combined heat and power (CHP) systems based on a hybrid optimization method employing fuzzy programming”. Energy, 49, 86-101, 2013.
98. Rezvan AT, Gharneh NS, Gharehpetian GB. “Optimization of distributed generation capacities in buildings under uncertainty in load demand”. Energy and Buildings, 57, 58-64, 2013.
99. Zhou N, Marnay C, Firestone R, Gao W, Nishida M. “An analysis of the DER adoption climate in Japan using optimization results for prototype buildings with US. Comparisons”. Energy and Buildings, 38, 1423-1433. 2006.
100. Rey FJ, Velasco E, Varela F. “Building energy analysis (BEA): A methodology to assess building energy labelling”. Energy and Buildings, 39, 709-716, 2007.
101. Medrano M, Brouwer J, McDonell V, Mauzey J, Samuelsen S. “Integration of distributed generation systems into generic types of commercial buildings in California”. Energy and Buildings, 40, 537-548, 2008.
102. Fernández MA, Zorita AL, García-Escudero LA, Duque O, Moríñigo D, Riesco M, Muñoz M. “Cost optimization of electrical contracted capacity for large customers”. International Journal of Electrical Power and Energy Systems, 46, 123-131, 2013.
103. Tulsyan A, Dhaka S, Mathur J, Yadav JV. “Potential of energy savings through implementation of Energy Conservation Building Code in Jaipur city, India”. Energy and Buildings, 58, 123-130, 2013.
104. García-Sanz-Calcedo J, López-Rodríguez F, Cuadros F. “Quantitative analysis on energy efficiency of health centers according to their size”. Energy and Buildings, 73, 7-12, 2014.
105. Çakir U, Çomakli K, Yüksel F. “The role of cogeneration systems in sustainability of energy”. Energy Conversion and Management, 63, 192-202, 2012.
106. Facci AL, Anreassi L, Martini F, Ubertini S. “Comparing energy and cost optimization in distributed energy systems management”. Journal of Energy Resources Technology, Transactions of the ASME, 136(3), 032001, 2014.
107. Chung M, Park HC. “Comparison of building energy demand for hotels, hospitals, and offices in Korea”. Energy, 92, 383-393, 2015.
108. Morgenstern P, Raslan R, Huebner G. “Applicability, potential and limitations of staff-centred energy conservation initiatives in English hospitals”. Energy Efficiency, 9, 27-28, 2016.
109. Moghimi S, Azizpour F, Mat S, Lim CH, Salleh E, Sopian K. “Building energy index and end-use energy analysis in large-scale hospitals-case study in Malaysia”. Energy Efficiency, 7, 243-256, 2014.
110. Radulovic D, Skok S, Kirincic V. “Cogeneration e Investment dilemma”. Energy, 48, 177-187, 2012.
111. Briller DL. “Patients and Urgency: Strategies for Designing Sustainable and Energy-efficient Hospitals For the 21st Century. Energy Engineering”. Journal of the Association of Energy Engineers, 111(6), 22-80, 2014.
112. Basken B, Galloni P. “Successful Low-cost Energy Management Implementation in Healthcare Facilities”. Energy Engineering: Journal of the Association of Energy Engineers, 111(5), 35-50, 2014.
113. Laitner JA, Hanson DA. “Modeling detailed energy-efficiency technologies and technology policies within a CGE framework”. Energy Journal, 27, 151-169, 2006.
114. Ahmed TMF, Rajagopalan P, Fuller R. “A classification of healthcare facilities: Toward the development of energy performance benchmarks for day surgery centers in Australia”. Health Environments Research and Design Journal, 8(4), 139-157, 2015.
115. Burpee H, McDade E. “Comparative Analysis of Hospital Energy Use: Pacific Northwest and Scandinavia”. Health Environments Research and Design Journal, 8, 20-44, 2014.
116. Teke A, Timur O, Bayındır KÇ, “Development and testing of an energy saving tool-Suitability analysis with case study”. International Journal of Electrical Power and Energy Systems, 77, 59-69, 2016.
117. Pradhan AK, Kar SK, Mohanty MK. “Off-grid renewable hybrid power generation system for a public health centre in rural village”. International Journal of Renewable Energy Research, 6, 282-288, 2016.
118. Okamoto S. “Saving energy in a hospital utilizing CCHP technology”. International Journal of Energy and Environmental Engineering, 2(2), 45-55, 2011.
119. Zheng CY, Wu JY, Zhai XQ, Wang RZ. “Impacts of feed-in tariff policies on design and performance of CCHP system in different climate zones”. Applied Energy, 175, 168-179, 2016.
120. Rohde T, Martinez R. “Equipment and energy usage in a large teaching hospital in norway”. Journal of Healthcare Engineering, 6(3), 419-434, 2015.
121. García-Sanz-Calcedo J. “Analysis on energy efficiency in healthcare buildings”. Journal of Healthcare Engineering, 5(3), 361-374, 2014.
122. Rajagopalan P, Elkadi H. “Energy performance of medium-sized healthcare buildings in Victoria, Australia- A case study”. Journal of Healthcare Engineering, 5(2), 247-260, 2013.
123. Teke A, Zor K, Timur O. “A simple methodology for capacity sizing of cogeneration and trigeneration plants in hospitals: A case study for a university hospital”. Journal of Renewable and Sustainable Energy, 7(5), 053102, 2015.
124. Teke A, Timur O. “Assessing the energy efficiency improvement potentials of HVAC systems considering economic and environmental aspects at the hospitals”. Renewable and Sustainable Energy Reviews, 33, 224-235, 2014.
125. Christiansen N, Kaltschmitt M, Dzukowski F, Isensee F. “Electricity consumption of medical plug loads in hospital laboratories: Identification, evaluation, prediction and verification”. Energy and Buildings, 107, 392-406. 2015.
126. Zhang J, Cho H, Knizley A. “Evaluation of financial incentives for combined heat and power (CHP) systems in U.S. Regions”. Renewable and Sustainable Energy Reviews, 59, 738-762, 2016.
127. Moghimi S, Bakhtyar B, Azizpour F, Sopian K, Lim CH, Mat S, Salleh E. “Maximization of energy saving and minimization of ınsulation cost in a tropical hospital: A case study in Malaysia”. WSEAS Transactions on Environment and Development, 9, 105-115, 2013.
128. Zorita AL, Fernández-Temprano MA, García-Escudero LA, Duque-Perez O. “A statistical modeling approach to detect anomalies in energetic efficiency of buildings”. Energy and Buildings, 110, 377-386, 2016.
129. Chicco G, Mancarella P. “From cogeneration to trigeneration: Profitable alternatives in a competitive market”. IEEE Transactions on Energy Conversion, 21, 265-272, 2006.
130. Mago PJ, Luck R. “Prime mover sizing for base-loaded combined heating and power systems”. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 226, 17-27, 2012.
131. Misa T, Crisford M, Jain S, Bansal PK. “Thermodynamic analysis of an in-situ cogeneration plant”. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221, 591-602, 2007.
132. Zheng C, Zhai X, Wu J, Yang G. “Modeling of CCHP system and analysis of thermal storage strategy by using TRNSYS software”. Huagong Xuebao/CIESC Journal, 66, 311-317, 2015.
133. Esmaeili MA, Jahromi AS, Twomey J, Yildirim B, Overcash M, Dominquez F, Thomas N, Mcadam A. “Hospital radiology department overhead energy estimation”. Proceedings of the 2011 IEEE International Symposium on Sustainable Systems and Technology, ISSST, USA, 16-18 May 2011.
134. Gordo E, Campos A, Coelho D. “Energy efficiency in a hospital building case study: Hospitais da universidade de Coimbra”. Proceedings of the 2011 3rd International Youth Conference on Energetics, IYCE, Portugal, 7-9 July 2011.
135. Machado CML, Scavarda A, Zhao F, Kipper LM. “A proposal of an energy saving technology framework for the hospital”. Chemical Engineering Transactions, 45, 241-246, 2015.
136. Alhurayess S, Darwish MK. “Analysis of energy management in hospitals”. Proceedings of the Universities Power Engineering Conference, UK, 4-7 September 2012.
137. Serra LM, Lozano MA, Carvalho M. “Evaluation of environmental loads for the synthesis of a trigeneration system”. ASME 2010 4th International Conference on Energy Sustainability, ES, USA, 17-22 May 2010.
138. Vocale P, Pagliarini G, Rainieri S. ace “Space Heating Load Estimation Procedure for CHP Systems sizing”. Journal of Physics: Conference Series; Italy, 22-24 June 2015.
139. Sanz-Calcedo JG, Cuadros-Blázquez F, Ruiz-Celma A, López-Rodríguez F. “Efficiency of a biomass boiler in a hospital center”. Use of olive crushing stones to produce heat. Dyna (Spain), 86, 343-349, 2011.
140. Dos Santos JB, Jabbour CJC. “Critical factors to be considered when planning the implementation of environmental improvements and energy saving”. Journal of Energy in Southern Africa, 24, 22-29, 2013.
141. Thongkaw S, Assawamartbunlue K. “Energy utilization index and benchmarking for a government hospital”. Kasetsart Journal-Natural Science 46, 298-304, 2012.
142. Kazem HA, Ali SQ, Alwaeli AHA, Mani K, Tariq M. “Life-cycle cost analysis and optimization of health clinic PV system for a rural area in Oman”. Lecture Notes in Engineering and Computer Science, 2, 1052-1056, 2013.
143. Nwanya SC, Sam-Amobi C, Ekechukwu OV. “Energy performance indices for hospital buildings in Nigeria”. International Journal of Technology, 7, 15-25, 2016.
144. Bilton A, Kelley L, Mazzini F. “Design optimization of sustainable off-grid power systems for the developing World”. ASME 2011 5th International Conference on Energy Sustainability, ES; USA, 7-10 August 2011.
145. Law YLE, Dworkin SB. “Characterization of the effects of borehole configuration and interference with long term ground temperature modelling of ground source heat pumps”. Applied Energy, 2016, 179, 1032-1047.
146. Howard B, Modi V. “Examination of the optimal operation of building scale combined heat and power systems under disparate climate and GHG emissions rates”. Applied Energy, 185, 280-293, 2017.
147. Cheung H, Braun JE. “Empirical modeling of the impacts of faults on water-cooled chiller power consumption for use in building simulation programs”. Applied Thermal Engineering; 99, 756-764, 2016.
148. Li MJ, Zhao W, Chen X, Tao WQ. “Economic analysis of a new class of vanadium redox-flow battery for medium- and large-scale energy storage in commercial applications with renewable energy”. Applied Thermal Engineering, 114, 802-814, 2017.
149. El-Maghlany WM, ElHefni AA, ElHelw M, Attia A. “Novel air conditioning system configuration combining sensible and desiccant enthalpy wheels”. Applied Thermal Engineering, 127, 1-15, 2017.
150. Christiansen N, Kaltschmitt M, Dzukowski F. “Electrical energy consumption and utilization time analysis of hospital departments and large scale medical equipment”. Energy and Buildings; 131, 172-183, 2016.
151. Buonomano A, Montanaro U, Palombo A, Santini S. “Temperature and humidity adaptive control in multi-enclosed thermal zones under unexpected external disturbances”. Energy and Buildings, 135, 263-285, 2017.
152. Ma H, Du N, Yu S, Lu W, Zhang Z, Deng N, Li C. “Analysis of typical public building energy consumption in northern China”. Energy and Buildings, 136, 139-150, 2017.
153. Dutta A, Samanta A, Neogi S. “Influence of orientation and the impact of external window shading on building thermal performance in tropical climate”. Energy and Buildings, 139, 680-689, 2017.
154. Biglia A, Carreda FV, Fabrizio E, Filippi M, Mandas N. “Technical-economic feasibility of CHP systems in large hospitals through the Energy Hub method: The case of Cagliari AOB”. Energy and Buildings, 147, 101-112, 2017.
155. Lan L, Tushar W, Otto K, Yuen C, Wood KL. “Thermal comfort improvement of naturally ventilated patient wards in Singapore”. Energy and Buildings, 154, 499-512, 2017.
156. Gimelli A, Muchillo M, Sannino R. “Optimal design of modular cogeneration plants for hospital facilities and robustness evaluation of the results”. Energy Conversion and Management, 134, 20-31, 2017.
157. Arabkoohsar A, Andresen GB. “Supporting district heating and cooling networks with a bifunctional solar assisted absorption chiller”. Energy Conversion and Management, 148, 184-196, 2017.
158. Chaichaloempreecha A, Winyuchakrit P, Limmeechokchai B. “Long-term energy savings and GHG mitigations in Thailand's building sector: impacts of energy efficiency plan”. Energy Procedia, 138, 847-852, 2017.
159. Thinate N, Wongsapai W, Damrongsak D. “Energy performance study in thailand hospital building”. Energy Procedia, 141, 255-259, 2017.
160. Calise F, d'Accadia MD, Libertini L, Quiriti E, Vicidomini M. “A novel tool for thermoeconomic analysis and optimization of trigeneration systems: A case study for a hospital building in Italy”. Energy, 126, 64-87, 2017.
161. Carnero MC, Gomez A. “Maintenance strategy selection in electric power distribution systems”. Energy, 129, 255-272, 2017.
162. Pizzolato A, Donato F, Verda V, Santarelli M, Sciacovelli A. “CSP plants with thermocline thermal energy storage and integrated steam generator e techno-economic modeling and design optimization”. Energy, 139, 231-246, 2017.
163. Bagnasco A, Catanzariti R, Coppi L, Fresi F, Silvestro F, Vinci A. “Multi facility energy monitoring in medical structures: Defining KPIs for energy saving and exporting best practices”. International Journal of Heat and Technology, 35, 214-220, 2017.
164. Ahmed TMF, Rajagopalan P, Fuller R. “Experimental validation of an energy model of a day surgery/procedure centre in Victoria”. Journal of Building Engineering, 10, 1-12, 2017.
165. Bertone E, Sahin O, Stewart RA, Zou PXW, Alam M, Hampson K, Blair E. “Role of financial mechanisms for accelerating the rate of water and energy efficiency retrofits in Australian public buildings: Hybrid bayesian network and system dynamics modelling approach”. Applied Energy, 210, 409-419, 2018.
166. Zhang J, Cho H, Luck R, Mago PJ. “Integrated photovoltaic and battery energy storage (PV-BES) systems: An analysis of existing financial incentive policies in the US”. Applied Energy, 212, 895-908, 2018.
167. Orosz M, Altes-Buch Q, Mueller A, Lemort V. “Experimental validation of an electrical and thermal energy demand model for rapid assessment of rural health centers in sub-Saharan Africa”. Applied Energy, 218, 382-390, 2018.
168. Ahn H, Rim D, Freihaut JD. “Performance assessment of hybrid chiller systems for combined cooling, heating and power production”. Applied Energy, 225, 501-512, 2018.
169. Luo S, Li H, Mao Y, Yang C. “Experimental research on a novel sun shading & solar energy collecting, coupling device for inpatient building in hot summer and cold winter climate zone in China”. Applied Thermal Engineering, 142, 89-99, 2018.
170. Gonzalez AG, García-Sanz-Calcedo J, Salgado DR. “Evaluation of Energy Consumption in German Hospitals: Benchmarking in the Public Sector”. Energies, 11, 2279, 2018.
171. Gordillo-Orquera R, Muñoz-Romero S, Arcos-Aviles D, Chillón R, Lopez-Ramos LM, Marques AG, Rojo-Álvarez JL. “Convex programming and bootstrap sensitivity for optimized electricity bill in healthcare buildings under a time-of-use pricing scheme”. Energies, 11(6), 1454, 2018.
172. Park SK, Moon HJ, Min KC, Hwang C, Kim S. “Application of a multiple linear regression and an artificial neural network model for the heating performance analysis and hourly prediction of a large-scale ground source heat pump system”. Energy and Buildings, 165, 206-215, 2018.
173. Giretti A, Vaccarini M, Casals M, Macarulla M, Fuertes A, Jones RV. “Reduced-order modeling for energy performance contracting”. Energy and Buildings, 167, 216-230, 2018.
174. González-Gil A, López-González JL, Fernández M, Eguía P, Erkoreka A, Granada E. “Thermal energy demand and potential energy savings in a Spanish surgical suite through calibrated simulations”. Energy and Buildings, 174, 513-526, 2018.
175. Urbanucci L, Testi D. “Optimal integrated sizing and operation of a CHP system with Monte Carlo risk analysis for long-term uncertainty in energy demands”. Energy Conversion and Management, 157, 307-316, 2018.
176. Cesari S, Valdiserri P, Coccaggna M, Mazzacane S. “Energy savings in Hospital patient rooms: the role of windows size and glazing properities”. Energy Procedia, 148, 1151-1158, 2018.
177. Noussan M, Jarre M. “Multicarrier energy systems: Optimization model based on real data and application to a case study”. International Journal of Energy Research, 42, 1338-1351, 2018.
178. Lee J, Ryu SH, Kim D. “Role of ICT in enhancing energy efficiency of commercial buildings: Case study of optimized energy control system in hospital "p"”. Journal of Renewable and Sustainable Energy, 10, 025101, 2018.
179. Isa NM, Tan CW, Yatim AHM. “A comprehensive review of cogeneration system in a microgrid: A perspective from architecture and operating system”. Renewable and Sustainable Energy Reviews, 81, 2236-2263, 2018.
180. Arabkoohsar A, Andresen GB. “A smart combination of a solar assisted absorption chiller and a power productive gas expansion unit for cogeneration of power and cooling”. Renewable Energy, 115, 489-500, 2018.
181. Zhao BY, Li Y, Wang RZ, Zhao ZG, Taylor RA. “A universal method for performance evaluation of solar photovoltaic air-conditioner”. Solar Energy, 172, 58-68, 2018.