Araştırma Makalesi
BibTex RIS Kaynak Göster

Alüminyum 2024 T-3 plakadaki hasar boyutunun lamb dalgası ile tespiti

Yıl 2017, Cilt: 23 Sayı: 4, 399 - 404, 18.08.2017

Öz

Bu
çalışmada, hasar tespiti ve yapısal durum izleme için Alüminyum 2024 T-3
plakası üzerinde oluşturulan 2 ile 5 cm arası kesikler Lamb dalgaları ile
incelenmiş ve Lamb dalgalarının simetrik ve asimetrik modlarının
karşılaştırılması yapılmıştır. Toplanan yüzey frekans cevaplarının zarfları
Hilbert dönüşümü ile elde edilmiş ve her bir hasarın zayıflama miktarı yüzdelik
olarak gösterilmiştir. Elde edilen sonuçlar, her iki Lamb dalga modunun
Alüminyum 2024 T-3 plakada oluşturulan kesik boyutlarının araştırılmasında
kullanılabileceğini göstermektedir.

Kaynakça

  • Dinakaran D, Sampathkumar S, Sivashanmugam N. "An experimental investigation on monitoring of crater wear in turning using ultrasonic technique". International Journal of Machine Tools and Manufacture, 49(15), 1234-1237, 2009.
  • Alonso F, Salgado D. "Analysis of the structure of vibration signals for tool wear detection". Mechanical Systems and Signal Processing, 22(3), 735-748, 2008.
  • Lu P, Chou Y. "Analysis of acoustic emission signal evolution for monitoring diamond-coated tool delamination wear in machining". Machining and Machine-tools: Research and Development, 1, 2013.
  • Sun J, Wong Y S, Hong G S, Rahman M. "Feature analysis in tool condition monitoring: a case study in titanium machining". International Journal of Computer Applications in Technology, 45(2-3), 177-185, 2012.
  • Salgado D, Alonso F. "An approach based on current and sound signals for in-process tool wear monitoring". International Journal of Machine Tools and Manufacture, 47(14), 2140-2152, 2007.
  • Fekrmandi H, Rojas J, Tansel I N, Yapici A, Uragun B. "Investigation of the computational efficiency and validity of the surface response to excitation method". Measurement, 62, 33-40, 2015.
  • Yu L, Giurgiutiu V. "Multi-mode damage detection methods with piezoelectric wafer active sensors". Journal of Intelligent Material Systems and Structures, 20(11), 1329-1341, 2009.
  • Ostachowicz W, Kudela P, Malinowski P, Wandowski T. "Damage localisation in plate-like structures based on PZT sensors". Mechanical Systems and Signal Processing, 23(6), 1805-1829, 2009.
  • Chakraborty D, Kovvali N, Wei J, Papandreou-Suppappola A, Cochran D, Chattopadhyay A. "Damage classification structural health monitoring in bolted structures using time-frequency techniques". Journal of Intelligent Material Systems and Structures, 2009.
  • Santoni G B, Yu L, Xu B, Giurgiutiu V. "Lamb wave-mode tuning of piezoelectric wafer active sensors for structural health monitoring". Journal of Vibration and Acoustics, 129(6), 752-762, 2007.
  • Giurgiutiu V. "Tuned Lamb wave excitation and detection with piezoelectric wafer active sensors for structural health monitoring". Journal of intelligent material systems and structures, 16(4), 291-305, 2005.
  • Fekrmandi H, Rojas J, Campbell J, Tansel I N, Kaya B, Taskin S. "Inspection of the ıntegrity of a multi-bolt robotic arm using a scanning laser vibrometer and ımplementing the surface response to excitation method (SuRE)". International Journal of Prognostics and Health Management, 5(1), 1-10, 2014.
  • Tansel I N, Singh G, Singh G, Korla S, Grisso B L, Salvino L W, Uragun B. "Monitoring the integrity of machine assemblies by using surface response to excitation (SuRE) approach". 5th International Conference on Recent Advances in Space Technologies (RAST 2011), Istanbul, Turkey, 9-11 June 2011.
  • Senyurek VY. "Detection of cuts and impact damage at the aircraft wing slat by using Lamb wave method". Measurement, 67, 10-23, 2015.
  • Giurgiutiu V, Bao J, Zagrai AN. "Structural health monitoring system utilizing guided Lamb waves embedded ultrasonic structural radar". ed: Google Patents, 2006.
  • Yu L, Giurgiutiu V. "In situ 2-D piezoelectric wafer active sensors arrays for guided wave damage detection". Ultrasonics, 48(2), 117-134, 2008.
  • Chen X, Li B. "Acoustic emission method for tool condition monitoring based on wavelet analysis". The International Journal of Advanced Manufacturing Technology, 33(9-10), 968-976, 2007.
  • Unal M, Onat M, Demetgul M, Kucuk H. "Fault diagnosis of rolling bearings using a genetic algorithm optimized neural network". Measurement, 58, 187-196, 2014.
  • Gu S, Ni J, Yuan J. "Non-stationary signal analysis and transient machining process condition monitoring". International Journal of Machine Tools and Manufacture, 42(1), 41-51, 2002.
  • Gangadharan R, Mahapatra DR, Gopalakrishnan S, Murthy C, Bhat M. "On the sensitivity of elastic waves due to structural damages: Time-frequency based indexing method". Journal of sound and vibration, 320(4), 915-941, 2009.
  • Quek ST, Tua P, Wang Q. "Detecting anomalies in beams and plate based on the Hilbert–Huang transform of real signals". Smart materials and structures, 12(3), 447, 2003.
  • Imano K, Endo T. "Experimental study on the mode conversion of lamb wave using a metal plate having a notch type defect". International Journal of the Society of Materials Engineering for Resources, 19(1-2), 20-23, 2013.
  • Agarwal S, Mitra M. "Lamb wave based automatic damage detection using matching pursuit and machine learning". Smart Materials and Structures, 23(8), 085012, 2014.
  • Chen X, Michaels JE, Lee SJ, Michaels TE. "Load-differential imaging for detection and localization of fatigue cracks using Lamb waves". NDT & E International, 51, 142-149, 2012.
  • Lamb H. "On waves in an elastic plate". Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 114-128, 1917.
  • Su Z, Ye L, Lu Y. "Guided Lamb waves for identification of damage in composite structures: A review". Journal of sound and vibration, 295(3), 753-780, 2006.
  • Kim YH, Kim DH, Han JH, Kim CG. "Damage assessment in layered composites using spectral analysis and Lamb wave". Composites Part B: Engineering, 38(7-8), 800-809, 2007.
Yıl 2017, Cilt: 23 Sayı: 4, 399 - 404, 18.08.2017

Öz

Kaynakça

  • Dinakaran D, Sampathkumar S, Sivashanmugam N. "An experimental investigation on monitoring of crater wear in turning using ultrasonic technique". International Journal of Machine Tools and Manufacture, 49(15), 1234-1237, 2009.
  • Alonso F, Salgado D. "Analysis of the structure of vibration signals for tool wear detection". Mechanical Systems and Signal Processing, 22(3), 735-748, 2008.
  • Lu P, Chou Y. "Analysis of acoustic emission signal evolution for monitoring diamond-coated tool delamination wear in machining". Machining and Machine-tools: Research and Development, 1, 2013.
  • Sun J, Wong Y S, Hong G S, Rahman M. "Feature analysis in tool condition monitoring: a case study in titanium machining". International Journal of Computer Applications in Technology, 45(2-3), 177-185, 2012.
  • Salgado D, Alonso F. "An approach based on current and sound signals for in-process tool wear monitoring". International Journal of Machine Tools and Manufacture, 47(14), 2140-2152, 2007.
  • Fekrmandi H, Rojas J, Tansel I N, Yapici A, Uragun B. "Investigation of the computational efficiency and validity of the surface response to excitation method". Measurement, 62, 33-40, 2015.
  • Yu L, Giurgiutiu V. "Multi-mode damage detection methods with piezoelectric wafer active sensors". Journal of Intelligent Material Systems and Structures, 20(11), 1329-1341, 2009.
  • Ostachowicz W, Kudela P, Malinowski P, Wandowski T. "Damage localisation in plate-like structures based on PZT sensors". Mechanical Systems and Signal Processing, 23(6), 1805-1829, 2009.
  • Chakraborty D, Kovvali N, Wei J, Papandreou-Suppappola A, Cochran D, Chattopadhyay A. "Damage classification structural health monitoring in bolted structures using time-frequency techniques". Journal of Intelligent Material Systems and Structures, 2009.
  • Santoni G B, Yu L, Xu B, Giurgiutiu V. "Lamb wave-mode tuning of piezoelectric wafer active sensors for structural health monitoring". Journal of Vibration and Acoustics, 129(6), 752-762, 2007.
  • Giurgiutiu V. "Tuned Lamb wave excitation and detection with piezoelectric wafer active sensors for structural health monitoring". Journal of intelligent material systems and structures, 16(4), 291-305, 2005.
  • Fekrmandi H, Rojas J, Campbell J, Tansel I N, Kaya B, Taskin S. "Inspection of the ıntegrity of a multi-bolt robotic arm using a scanning laser vibrometer and ımplementing the surface response to excitation method (SuRE)". International Journal of Prognostics and Health Management, 5(1), 1-10, 2014.
  • Tansel I N, Singh G, Singh G, Korla S, Grisso B L, Salvino L W, Uragun B. "Monitoring the integrity of machine assemblies by using surface response to excitation (SuRE) approach". 5th International Conference on Recent Advances in Space Technologies (RAST 2011), Istanbul, Turkey, 9-11 June 2011.
  • Senyurek VY. "Detection of cuts and impact damage at the aircraft wing slat by using Lamb wave method". Measurement, 67, 10-23, 2015.
  • Giurgiutiu V, Bao J, Zagrai AN. "Structural health monitoring system utilizing guided Lamb waves embedded ultrasonic structural radar". ed: Google Patents, 2006.
  • Yu L, Giurgiutiu V. "In situ 2-D piezoelectric wafer active sensors arrays for guided wave damage detection". Ultrasonics, 48(2), 117-134, 2008.
  • Chen X, Li B. "Acoustic emission method for tool condition monitoring based on wavelet analysis". The International Journal of Advanced Manufacturing Technology, 33(9-10), 968-976, 2007.
  • Unal M, Onat M, Demetgul M, Kucuk H. "Fault diagnosis of rolling bearings using a genetic algorithm optimized neural network". Measurement, 58, 187-196, 2014.
  • Gu S, Ni J, Yuan J. "Non-stationary signal analysis and transient machining process condition monitoring". International Journal of Machine Tools and Manufacture, 42(1), 41-51, 2002.
  • Gangadharan R, Mahapatra DR, Gopalakrishnan S, Murthy C, Bhat M. "On the sensitivity of elastic waves due to structural damages: Time-frequency based indexing method". Journal of sound and vibration, 320(4), 915-941, 2009.
  • Quek ST, Tua P, Wang Q. "Detecting anomalies in beams and plate based on the Hilbert–Huang transform of real signals". Smart materials and structures, 12(3), 447, 2003.
  • Imano K, Endo T. "Experimental study on the mode conversion of lamb wave using a metal plate having a notch type defect". International Journal of the Society of Materials Engineering for Resources, 19(1-2), 20-23, 2013.
  • Agarwal S, Mitra M. "Lamb wave based automatic damage detection using matching pursuit and machine learning". Smart Materials and Structures, 23(8), 085012, 2014.
  • Chen X, Michaels JE, Lee SJ, Michaels TE. "Load-differential imaging for detection and localization of fatigue cracks using Lamb waves". NDT & E International, 51, 142-149, 2012.
  • Lamb H. "On waves in an elastic plate". Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 114-128, 1917.
  • Su Z, Ye L, Lu Y. "Guided Lamb waves for identification of damage in composite structures: A review". Journal of sound and vibration, 295(3), 753-780, 2006.
  • Kim YH, Kim DH, Han JH, Kim CG. "Damage assessment in layered composites using spectral analysis and Lamb wave". Composites Part B: Engineering, 38(7-8), 800-809, 2007.
Toplam 27 adet kaynakça vardır.

Ayrıntılar

Konular Mühendislik
Bölüm Makale
Yazarlar

Muhammet Ünal

Yayımlanma Tarihi 18 Ağustos 2017
Yayımlandığı Sayı Yıl 2017 Cilt: 23 Sayı: 4

Kaynak Göster

APA Ünal, M. (2017). Alüminyum 2024 T-3 plakadaki hasar boyutunun lamb dalgası ile tespiti. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 23(4), 399-404.
AMA Ünal M. Alüminyum 2024 T-3 plakadaki hasar boyutunun lamb dalgası ile tespiti. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi. Ağustos 2017;23(4):399-404.
Chicago Ünal, Muhammet. “Alüminyum 2024 T-3 Plakadaki Hasar Boyutunun Lamb Dalgası Ile Tespiti”. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi 23, sy. 4 (Ağustos 2017): 399-404.
EndNote Ünal M (01 Ağustos 2017) Alüminyum 2024 T-3 plakadaki hasar boyutunun lamb dalgası ile tespiti. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi 23 4 399–404.
IEEE M. Ünal, “Alüminyum 2024 T-3 plakadaki hasar boyutunun lamb dalgası ile tespiti”, Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, c. 23, sy. 4, ss. 399–404, 2017.
ISNAD Ünal, Muhammet. “Alüminyum 2024 T-3 Plakadaki Hasar Boyutunun Lamb Dalgası Ile Tespiti”. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi 23/4 (Ağustos 2017), 399-404.
JAMA Ünal M. Alüminyum 2024 T-3 plakadaki hasar boyutunun lamb dalgası ile tespiti. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi. 2017;23:399–404.
MLA Ünal, Muhammet. “Alüminyum 2024 T-3 Plakadaki Hasar Boyutunun Lamb Dalgası Ile Tespiti”. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, c. 23, sy. 4, 2017, ss. 399-04.
Vancouver Ünal M. Alüminyum 2024 T-3 plakadaki hasar boyutunun lamb dalgası ile tespiti. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi. 2017;23(4):399-404.





Creative Commons Lisansı
Bu dergi Creative Commons Al 4.0 Uluslararası Lisansı ile lisanslanmıştır.