H-Bridge Motor Driver Circuit for Control of Brushed DC Motors

Öz

Brushed DC motors are used in many applications today. Brushed DC motors should be controlled to operate at the desired speed, forward or reverse, and for the desired duration in their applications. In this study, a motor driver circuit that includes the control of the brushed DC motor with a door driver using an H-Bridge and the configuration of the door driver, controlling the brushed DC motor operating current, speed and position control of the brushed DC motor with a Hall sensor, and CAN-BUS communication is explained in detail in the rest of the article. An experimental circuit board block diagram, software flow diagram, and 3D images of the circuit board that will serve as an example according to the automotive industry requirements are shared. The results of the experimental application are shared and the mentioned Brushed DC motor H-Bridge driver circuit will contribute to a better understanding of motor control.

Anahtar Kelimeler

• CAN-BUS communication
• H-bridge
• Gate driver
• Motor current
• direction and speed control.

Kaynakça

1. Hughes,A. Electric Motors and Drives Fundamentals, Types and Applications, 3rd Edition, Austin Hughes, Published by Elsevier Ltd, 2006
2. Vibhor Gupta, “Working and Analysis of the H – Bridge Motor Driver Circuit Designed for Wheeled Mobile Robots, Advanced Computer Control (ICACC), 2010 2nd International Conference, 27-29 March 2010, Shenyang, China. https://doi.org/10.1109/ICACC.2010.5486818
3. Payal P.Raval, Prof.C.R.mehta, “Modeling, Simulation and Implementation of Speed Control of DC Motor Using PIC 16F877A”, International Journal of Emerging Technology and Advanced Engineering,, ISSN 2250-2459, Volume 2, Issue 3, March 2012 www.ijetae.com
4. Y. S. E. Ali, S. B. M. Noor, S. M. Uashi and M. K Hassan, “Microcontroller Performance for DC Motor Speed Control System”, National Power and Energy Conference (PECon) 2003 Proceedings, Bangi, Malaysia https://doi.org/10.1109/PECON.2003.1437427
5. Vibhor Gupta, “Working and Analysis of the H – Bridge Motor Driver Circuit Designed for Wheeled Mobile Robots, Advanced Computer Control (ICACC), 2010 2nd International Conference, 27-29 March 2010, Shenyang, China https://doi.org/10.1109/ICACC.2010.5486818
6. Snehlata Sanjay Thakare1, Prof.Santosh Kompelli, “Design and implementation of dc motor speed control based on PIC microcontroller”, International Journal Of Engineering And Computer Science ISSN:2319-7242 Volume - 3 Issue -9 September, 2014 Page No. 8075-8079VDV
7. N. Mohan, T.M. Undeland and W. P. Robbins, Power Electronics: Converters, Applications, and Design, 2nd ed., John Wiley & Sons, Inc., 1995. https://doi.org/10.13140/RG.2.2.36786.58562
8. J. Brown and B. Jordan, "Brief H-Bridge Theory of Operation", http://www.dprg.org/tutorials/1998-04a/, August 2002

9. AECouncil, AEC Standars Documents, “http://www.aecouncil.com/AECDocuments.html”.
10. Wikipedia, Electromagnetic compatibility, https://en.wikipedia.org/wiki/Electromagnetic_compatibility.
11. B. Bellini, A. Arnaud, S. Rezk, and M. Chiossi, “An integrated H-bridge circuit in a HV technology,” in 2016 IEEE 7th Latin American Symposium on Circuits & Systems (LASCAS), pp. 331–334, IEEE, 2016 https://doi.org/10.1109/LASCAS.2016.7451077
12. H. -C. Chen, "An H-bridge driver using gate bias for DC motor control," 2013 IEEE International Symposium on Consumer Electronics (ISCE), Hsinchu, Taiwan, 2013, pp. 265-266, doi: 10.1109/ISCE.2013.6570219. keywords: {DC motors;Pulse width modulation;Logic gates;MOSFET;Bridge circuits;Voltage measurement;Power transistors}, https://doi.org/10.1109/ISCE.2013.6570219
13. Texas Instruments, DRV8703-Q1 Integrated Motor Driver datasheet, “https://www.ti.com/general/docs/suppproductinfo.tsp?distId=10&gotoUrl=https%3A%2F%2Fwww.ti.com%2Flit%2Fgpn%2Fdrv8703-q1” Texas Instruments, LM74610-Q1 Integrated H-Bridge Driver datasheet, “https://www.ti.com/lit/ds/symlink/lm74610-q1.pdf?ts=1742728274291&ref_url=https%253A%252F%252Fwww.google.com%252F”.
14. ISO 16750, Road vehicles — Environmental conditions and testing for electrical and electronic equipment, ISO 16750:2023.
15. ISO 7637, Road vehicles — Electrical disturbances from conduction and coupling, ISO 7637:2023.
16. ISO 11898, Road vehicles — Controller area network (CAN), ISO 11898:2024.