EN
TR
Part Production Using Rapid Freezing Prototyping
Öz
Today, when we look at the manufacturing sector, two main manufacturing method has come to the fore: manufacturing methods and chipless manufacturing methods. These traditional manufacturing methods are turning, milling, drilling and chipless manufacturing methods are casting, forging, cold / hot rolling, extrusion, sheet metal processing. In addition to this method, electrical discharge machining, wire electrical discharge machining, chemical treatment, ultrasonic treatment and laser cutting are used as advanced manufacturing techniques. Rapid prototyping is one of the manufacturing method which can respond immediately to the needs of the designers in the product development process. In this study, one of the rapid prototyping method, rapid freezing prototyping will be described, discussed ways which shorten the construction period and the factors that influence treatment processes will be analyzed. Advantages and disadvantages over other rapid prototyping methods will be exposed
Anahtar Kelimeler
Ayrıntılar
Birincil Dil
Türkçe
Konular
-
Bölüm
-
Yayımlanma Tarihi
1 Haziran 2015
Gönderilme Tarihi
1 Haziran 2015
Kabul Tarihi
-
Yayımlandığı Sayı
Yıl 2015 Cilt: 18 Sayı: 2
APA
Durgun, İ., & Doruk, E. (2015). Hızlı Donma Prototipleme Yöntemi ile Parça Üretimi. Politeknik Dergisi, 18(2), 53-61. https://izlik.org/JA59LG36CR
AMA
1.Durgun İ, Doruk E. Hızlı Donma Prototipleme Yöntemi ile Parça Üretimi. Politeknik Dergisi. 2015;18(2):53-61. https://izlik.org/JA59LG36CR
Chicago
Durgun, İsmail, ve Emre Doruk. 2015. “Hızlı Donma Prototipleme Yöntemi ile Parça Üretimi”. Politeknik Dergisi 18 (2): 53-61. https://izlik.org/JA59LG36CR.
EndNote
Durgun İ, Doruk E (01 Haziran 2015) Hızlı Donma Prototipleme Yöntemi ile Parça Üretimi. Politeknik Dergisi 18 2 53–61.
IEEE
[1]İ. Durgun ve E. Doruk, “Hızlı Donma Prototipleme Yöntemi ile Parça Üretimi”, Politeknik Dergisi, c. 18, sy 2, ss. 53–61, Haz. 2015, [çevrimiçi]. Erişim adresi: https://izlik.org/JA59LG36CR
ISNAD
Durgun, İsmail - Doruk, Emre. “Hızlı Donma Prototipleme Yöntemi ile Parça Üretimi”. Politeknik Dergisi 18/2 (01 Haziran 2015): 53-61. https://izlik.org/JA59LG36CR.
JAMA
1.Durgun İ, Doruk E. Hızlı Donma Prototipleme Yöntemi ile Parça Üretimi. Politeknik Dergisi. 2015;18:53–61.
MLA
Durgun, İsmail, ve Emre Doruk. “Hızlı Donma Prototipleme Yöntemi ile Parça Üretimi”. Politeknik Dergisi, c. 18, sy 2, Haziran 2015, ss. 53-61, https://izlik.org/JA59LG36CR.
Vancouver
1.İsmail Durgun, Emre Doruk. Hızlı Donma Prototipleme Yöntemi ile Parça Üretimi. Politeknik Dergisi [Internet]. 01 Haziran 2015;18(2):53-61. Erişim adresi: https://izlik.org/JA59LG36CR