Scalar Speed Control of Induction Motors with Difference Frequency
Öz
Speed monitoring of electric motors has attracted the attention of many researchers from past to present. Induction Motor (IM), which is one of the electric motor types, falls behind the nominal speed in different loads. This study was conducted to increase the speed control performance of IM. In the study, speed control of IMs was realized by Difference Frequency (DF). The Scalar Control (SC) method was used in IM speed control. In order to increase the performance of SC, the frequency information received from IM was compared with the reference frequency. The resulting DF was applied to the system input again. For the performance analysis of the study; SC, PI + SC and DF + SC methods were compared. The results obtained from the study simulated in Matlab software show that the proposed method can be used in speed control.
Anahtar Kelimeler
Kaynakça
- [1] B. K. Bose, “Modern Power Electronics and AC Drives”, Upper Saddle River, NJ: Prentice-Hall PTR, 2002.
- [2] S. Kouro, R. Bernal, H. Miranda, C. A. Silva, and J. Rodriquez, ″High-Performance Torque and Flux Control for Multilevel Inverter Fed Induction Motors”, IEEE Transaction on Power Electronics, 2007; 22, 6: 2116–2123.
- [3] C. C. Wang, and C. H. Fang, ″Sensorless Scalar Controlled Induction Motor Drives with Modified Flux Observer”, IEEE Journals & Magazines, 2002; 22, 8: 61 - 61.
- [4] G. Fouad, ″AC Electric Motors Control Advanced Design Techniques and Applications”, Wiley, New Delhi, India, 2013.
- [5] S. J. Paula, J. Jeromeb, S. Kakania, ‘Active Rectifier Based Harmonic Compensator for a Direct Torque Controlled Induction Motor Drive’, IETE Journal of Research, 2015; 61, 6: 573-580.
- [6] S. Tuncer, ‘High-Performance Vector Control Strategy For Multilevel Inverter Fed Induction Motor’, Journal of the Faculty of Engineering and Architecture of Gazi University, 2015; 30, 1: 119-130.
- [7] X. Zou, P. Zhu, Y. Kang, and J. Chen, ‘Speed identification for vector control of induction motors with voltage decoupling control principle’, 38th IAS Annual Meeting, Conference Record of the Industry Applications Conference; 12-16 Oct. 2003.
- [8] A. Djahbar, B. Mazari, and M. Latroch, ‘Control strategy of three-phase matrix converter fed induction motor drive system’, The IEE Pulsed Power symposium; 8-8 Sept. 2005; Basingstoke, UK: IEEE.
Ayrıntılar
Birincil Dil
İngilizce
Konular
Mühendislik
Bölüm
Araştırma Makalesi
Yazarlar
Ozcan Otkun
*
0000-0002-5025-1516
Türkiye
Yayımlanma Tarihi
1 Haziran 2020
Gönderilme Tarihi
23 Ekim 2018
Kabul Tarihi
2 Nisan 2019
Yayımlandığı Sayı
Yıl 2020 Cilt: 23 Sayı: 2
Cited By
Asenkron Motor Geometrisinin Motor Yol Alma Süresine Etkilerinin İncelenmesi
Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi
https://doi.org/10.35193/bseufbd.899158AKI VE KAYMA FREKANSI KESTİRİMİ İLE ASENKRON MOTORUN ALGILAYICISIZ SKALER HIZ DENETİMİ
Mühendislik Bilimleri ve Tasarım Dergisi
https://doi.org/10.21923/jesd.975960Closed-Loop Adaptive High-Starting Torque Scalar Control Scheme for Induction Motor Variable Speed Drives
Energies
https://doi.org/10.3390/en15103489Normalized Model Reference Adaptive Control Applied to High Starting Torque Scalar Control Scheme for Induction Motors
Energies
https://doi.org/10.3390/en15103606Implementation of Three Phase Induction Motor Pre-Design Program on Electronic Circuit
Journal of Polytechnic
https://doi.org/10.2339/politeknik.1217145New Adaptive Starting Scalar Control Scheme for Induction Motor Variable Speed Drives
IEEE Transactions on Energy Conversion
https://doi.org/10.1109/TEC.2021.3108664A New Induction Motor V/f Control Capable of Starting With Lower Current and Rated Torque
IEEE Transactions on Industrial Electronics
https://doi.org/10.1109/TIE.2025.3531484Analytical Modeling, FEM Assessment, and Experimental Verificatıon of Induction Machines Using a Specialized VB.net Design Platform
Journal of Electrical Engineering & Technology
https://doi.org/10.1007/s42835-026-02737-5