XRD vs Raman for InGaN/GaN Structures
Öz
In this study, InGaN/GaN structures are grown by using Metal Organic Chemical Vapor Deposition (MOCVD) technique. Some structural, optical and morphological properties of InGaN/GaN structures are investigated in detail. For structural analysis, X-ray diffraction (XRD), for optical, Raman and morphological, Atomic Force Microscopy (AFM) measurement techniques are used. In XRD analysis both samples presented hexagonal crystal structure. XRD peaks for these two samples showed small differences dependent on growth conditions. Strain and stress values are determined from XRD and they are compared with Raman results. In Raman analysis, five different chemicals are determined in both samples. Raman analysis results are in good accordance with XRD, growth conditions and AFM images. In AFM images, there can be seen hills and holes and they are partly homogeneous. There are also some white regions in AFM images. According to Raman peak center data, these white regions are detected as white rust.
Anahtar Kelimeler
Kaynakça
- [1] Huang, C.F., et al., Characterization of InGaN-based photovoltaic devices by varying the indium contents. Thin Solid Films, 2013. 529: p. 278-281.
- [2] Neudeck, P.G., R.S. Okojie, and L.Y. Chen, High-temperature electronics - A role for wide bandgap semiconductors? Proceedings of the Ieee, 2002. 90(6): p. 1065-1076.
- [3] Monemar, B., Paskov, P. P., Kasic, A., ―Optical properties of InN—the bandgap question‖, Supperlatt. Microstruct., 38 (2005) 38.
- [4] Nanishi,Y., Saito, Y., Yamaguchi, T., ―RF-Molecular Beam Epitaxy Growth and Properties of InN and Related Alloys‖, Japan J. Appl. Phys., 42 (2003) 2549.
- [5] Lee, S. N., Tan, S., Lee, W., Paek, H., Seon, M., Lee, I. H., Nam, O., Park, Y., “Characterization of optical and crystal qualities in InxGa1–xN/InyGa1–yN multi-quantum wells grown by MOCVD, J. Cryst. Growth, 250 (2003) 256.
- [6] Lafont, U., Zeijl, H., Zwaag, S. (2012). Increasing the reliability of solid state lighting system via self-healing approaches, Microelectronic Reliability, 52(1), 71- 89.
- [7] Akpinar, O., et al., On the elastic properties of INGAN/GAN LED structures. Applied Physics a-Materials Science & Processing, 2019. 125(2).
- [8] Oura, K., Lifshitsi V. G., Saranin, A. A., Zotov, A. V., Katayama, M. (2003). Surface science (First edition). Berlin: Springer,166, 229, 378-382.
Ayrıntılar
Birincil Dil
İngilizce
Konular
Mühendislik
Bölüm
Araştırma Makalesi
Yazarlar
Ömer Akpınar
0000-0002-5172-8283
Türkiye
Mustafa Kemal Öztürk
Bu kişi benim
0000-0002-8508-5714
Türkiye
Süleyman Özçelik
0000-0002-3761-3711
Türkiye
Ekmel Özbay
Bu kişi benim
0000-0003-2953-1828
Türkiye
Yayımlanma Tarihi
1 Haziran 2020
Gönderilme Tarihi
9 Mart 2019
Kabul Tarihi
4 Nisan 2019
Yayımlandığı Sayı
Yıl 2020 Cilt: 23 Sayı: 2
Cited By
Enhanced Heat Dissipation in Gallium Nitride-Based Light-Emitting Diodes by Piezo-phototronic Effect
Nano Letters
https://doi.org/10.1021/acs.nanolett.1c00999Altın Nano Çubuklar ve Gümüş Nano Parçacıklar Kullanılarak Yüzey İyileştirilmiş Raman Spektroskopisi Yoluyla Saf ve Karışık İdrar Lekelerinin Tanımlanması
Journal of Polytechnic
https://doi.org/10.2339/politeknik.1216163Determination of poisson’s ratio using growth temperature variations of InGaN/GaN MQW
Journal of Materials Science: Materials in Electronics
https://doi.org/10.1007/s10854-020-04055-6