Sıcak Ekstrüze Edilmiş AA7075-Sicp Kompozitlerin Tribolojik Karakteristiklerine Isıl İşlemin Etkisi

Yıl 2017, Cilt: 20 Sayı: 4, 807 - 814, 20.12.2017

Ulaş Matik Kübra Tanattı

https://doi.org/10.2339/politeknik.368999

Cited By: 6

Öz

Toz
metal kompaktların sıcak ekstrüzyonu ile üretilen ve farklı oranlarda 32 µm
boyutlu SiC partiküller ile takviye edilen AA7075 Al matrisli
kompozitlerin  mikroyapı, sertlik ve
tribolojik performansına T6 ve T73 ısıl işlemlerinin etkisi incelendi. Bu amaçla,
soğuk olarak preslenmiş farklı SiC partikül içeriğine sahip AA7075 toz metal
kompaktlar 480 °C’de, 12 mm çaplı çubuklar halinde ekstrüze edildi. T6 ve T73
ısıl işlemlerinin uygulandığı ekstrüze edilmiş numunelerin mikroyapı, sertlik
ve tribolojik karakteristikleri tarama elektron mikroskobu (SEM), enerji dağınımlı x-ray analizör (EDX), brinell sertlik ve adhesif aşınma test ve analizleri ile incelendi. Deneysel sonuçlar,
SiC partikül içeriğinin artmasına bağlı olarak kompozitin sertlik ve
aşınma direncinin de arttığını göstermektedir. Ayrıca, T6 ısıl işlemli
numunelerin T73 ısıl işlemli numunelere göre daha iyi sertlik, sürtünme ve
aşınma performansı gösterdiği tespit edildi. 

Anahtar Kelimeler

AA7075, kompozit, ekstrüzyon, aşınma, sertlik

Kaynakça

• 1. Ezatpour H. R., Torabi Parizi M., Sajjadi S. A., Ebrahimi G. R. and Chaichi A., "Microstructure, mechanical analysis and optimal selection of 7075 aluminum alloy based composite reinforced with alumina nanoparticles", Materials Chemistry and Physics, 178: 119–127, (2016). 2. Mohammed K. S. and Naeem H. T. "Corrosion Behaviour of Al 2 O 3p Reinforced Al-Zn-Mg-Cu-Ni-Co Alloy Fabricated via PM", International Journal of Science and Research (IJSR), 4: 2–6 (2015). 3. Çevik B., Özçatalbaş Y. and Gülenç B. "Effect of welding speed on the mechanical properties and weld defects of 7075 Al alloy joined by FSW", Kovove Materialy, 54: 241-247, (2016). 4. Übeyli M., Balci E., Sarikan B., Öztas M. K., Camuşcu N., Yildirim R. O. and Keleş Ö., "The ballistic performance of SiC-AA7075 functionally graded composite produced by powder metallurgy", Materials and Design, 56: 31–36, (2014). 5. Cruz S., Rey P., Román M. and Merino P. "Influence of Content and Particle Size on Properties of Tic Reinforced 7075 Aluminum Matrix Composite", 15th European Conference on Composite Materials, 1–8, (2012). 6. Hernández-Martinez S.E., Cruz-Rivera J.J., Garay-Reyes C.G. Martínez-Sánchez and R. Estrada-Guel, I., "Comparative study of synthesis of AA 7075-ZrO2metal matrix composite by different mills", Journal of Alloys and Compounds, 643: S107–S113, (2015). 7. Shen, Q., Wu, C., Luo, G., Fang, P., Li, C., Wang, Y. and Zhang, L. "Microstructure and mechanical properties of Al-7075/B4C composites fabricated by plasma activated sintering", Journal of Alloys and Compounds, 588: 265–270, (2014). 8. Karunanithi R., Bera S. and Ghosh K.S., " Electrochemical behaviour of TiO2 reinforced Al 7075 composite", Materials Science and Engineering B, 190: 133–143, (2014). 9. Shanbhag V. V., Yalamoori N. N., Karthikeyan S., Ramanujam R. and Venkatesan K., "Fabrication, surface morphology and corrosion ınvestigation of Al 7075-Al 2O3 matrix composite in sea water and ındustrial", Procedia Engineering, 97: 607–613, (2014). 10. Ramakoteswara V., Ramanaiah N., Moulana M. and Sarcar M., "Mechanical and tribological properties of AA7075 – TiC metal matrix composites under heat treated ( T 6 ) and cast conditions", Integrative Medicine Research, 5: 377–383, (2016). 11. Kennedy A. R. and Wyatt S. M. "Characterizing particle-matrix interfacial bonding in particulate Al-TiC MMCs produced by different methods", Composites Part A: Applied Science and Manufacturing, 32: 555–559 (2001). 12. Daoud A. and Reif W. "Influence of Al2O3 particulate on the aging response of A356 Al-based composites", Journal of Materials Processing Technology, 123: 313–318, (2002). 13. Hasırcı H. and Gül F. "Investigation of abrasive wear behaviours in B4c /Al composites depending on reinforcement volume fraction", SDU International Technologic Science, 2: 15–21, (2010). 14. Kumar S., Chakraborty M., Sarma V. S. and Murty B. S. "Tensile and wear behaviour of in situ Al–7Si/TiB2 particulate composites", Wear, 265: 134–142, (2008). 15. Çevik B., Özçatalbaş Y. and Gülenç B. " Friction stir welding of 7075-T651 aluminium alloy", Practical Metallography, 53: 6-23 (2016). 16. Li J. F., Peng Z. W., Li C. X., Jia Z. Q., Chen W. J. and Zheng Z. Q., "Mechanical properties, corrosion behaviors and microstructures of 7075 aluminium alloy with various aging treatments", Transactions of Nonferrous Metals Society of China (English Edition), 18: 755–762, (2008). 17. Baydoğan M., Çimenoğlu H. ve Kayalı E. S. "RRA işleminin 7075 alaşımının mekanik özelliklerine etkisi", İTÜ Dergisi, 108–116, (2004). 18. Abreu, C. M., Cristóbal, M. J., Figueroa, R. and Pena, G. "Wear and corrosion performance of two different tempers (T6 and T73) of AA7075 aluminium alloy after nitrogen implantation", Applied Surface Science, 327: 51–61, (2015). 19. Holt, R. T., Raizenne, M. D., Wallace, W. and DuQuesnay, D. L. "RRA Heat Treatment of Large Al 7075-T6 Components", RTO AVT Workshop on “New Metallic Materials for the Structure of Aging Aircraft”, 7.1-7.11, (1999). 20. Ranganatha R., Anil Kumar V., Nandi V. S., Bhat R. R. and Muralidhara B. K., "Multi-stage heat treatment of aluminum alloy AA7049", Transactions of Nonferrous Metals Society of China (English Edition), 23: 1570–1575, (2013). 21. Taleghani M. A. J., Navas E. M. R. and Torralba J. M. "Microstructural and mechanical characterisation of 7075 aluminium alloy consolidated from a premixed powder by cold compaction and hot extrusion", Journal of Materıals and Design, 55: 674–682, (2014). 22. Kaczmar J. W. and Pietrzak K. "The production and application of metal matrix composite materials", Journals of Materials Processing Technology, 106: 58–67, (2000). 23. Wang Z., Song M., Sun C. and He Y. "Effects of particle size and distribution on the mechanical properties of SiC reinforced Al-Cu alloy composites", Materials Science and Engineering A, 528: 1131–1137, (2011). 24. Danh N. C., Rajan K. and Wallace W., "A TEM study of microstructural changes during retrogression and reaging in 7075 aluminum", Metallurgical Transactions A, 14: 1843–1850, (1983). 25. Rahimian M., Parvin N. and Ehsani N. "Investigation of particle size and amount of alumina on microstructure and mechanical properties of Al matrix composite made by powder metallurgy", Materials Science and Engineering A, 527: 1031–1038, (2010). 26. Mahajan G., Karve N., Patil U., Kuppan P. and Venkatesan K. "analysis of microstructure , hardness and wear of Al-SiC-TiB₂ hybrid metal matrix composite", Indian Journal of Science and Technology, 8: 101–105, (2015). 27. Mazahery A., Abdizadeh H. and Baharvandi H. R., "Development of high-performance A356/nano-Al2O3 composites", Materials Science and Engineering A: 518, 61–64, (2009). 28. Mazahery A. and Shabani M. O. "Characterization of cast A356 alloy reinforced with nano SiC composites", Transactions of Nonferrous Metals Society of China (English Edition), 22: 275–280, (2012). 29 Reddy M. S., Chetty S. V., Premkumar S. and Reddappa H. N., "Influence of reinforcements and heat treatment on mechanical and wear properties of Al 7075 based hybrid composites" Procedia Materials Science: 5: 508–516, (2014). 30. Karabulut Ş., Karakoç H. and Çıtak R. "Influence of B 4 C particle reinforcement on mechanical and machining properties of Al6061/B4C composites", Composites Part B, 101, (2016). 31. El-kady O. and Fathy A. "Effect of SiC particle size on the physical and mechanical properties of extruded Al matrix nanocomposites", Materials and Design, 54: 348–353, (2014). 32. Ateş E. A. and Güral A., "A Study on ageing of AA2014-Al4C3 composite materials produced by P/M", Journal of the Faculty of Engineering and Architecture of Gazi University, 31: 65–71, (2016). 33. Yılmaz R., Özyürek D. and Kibar E. "The Effects of retrogression parameters on hardness and wear behaviours of 7075 aluminum alloys" Journal of the Faculty of Engineering and Architecture of Gazi University , 27: 429–438, (2012). 34. Diler E. A. and Ipek R. "An experimental and statistical study of interaction effects of matrix particle size, reinforcement particle size and volume fraction on the flexural strength of Al–SiCp composites by P/M using central composite design", Materials Science and Engineering: A, 548: 43–55, (2012). 35. Akhlaghi F., Lajevardi A. and Maghanaki H. M. "Effects of casting temperature on the microstructure and wear resistance of compocast A356/SiCp composites: a comparison between SS and SL routes", Journal of Materials Processing Technology, 155–156: 1874–1880, 2004). 36. Özyürek D., Tunçay T. and Kaya H. "The effects of T5 and T6 heat treatments on wear behaviour of AA6063 alloy". High Temperature Materials and Processes, 33: 231–237, (2014).