Optimization of Process Parameters of Ground Source Heat Pumps for Space Heating Applications with Taguchi Method

Yıl 2018, Cilt: 21 Sayı: 4, 991 - 998, 01.12.2018

Mustafa Bahadır Özdemir

https://doi.org/10.2339/politeknik.473411

Öz

In this paper, optimization of the influence of the process parameters
of ground source heat pump (GSHP) with the double U tube heat
exchanger for space heating applications was performed. The coefficient of performance (COP_sys)
in GSHP system was investigated during experimental measurements with various
process parameters; space air inlet/outlet temperatures (T_i,sa and T_o,sa)
and soil inlet/outlet temperatures (T_i,wa and T_o,wa).
Taguchi method performed for obtained the optimum process conditions on the COP_sys
in GSHP system. Taguchi experimental design considered as L16 orthogonal array.
The most influence of process parameter on the COP_sys in GSHP system
was evaluated by using analysis of variance (ANOVA) and signal/noise (S/N)
ratio. The optimum process parameter was determined as A4B1C1D1 for COP_sys
in GSHP with ANOVA analysis. The optimum levels were computed as T_i,sa
at Level 1 (32 °C),  the T_o,sa
at Level 2 (17°C), the T_i,wa at Level 2 (6°C) and and the T_o,wa
at Level 1 (9°C). The most significant parameter on the COPsys for space
heating applications of GSHP system were found as T_i,sa and T_o,sa
with 48.4 %..

Anahtar Kelimeler

Taguchi method, ANOVA, ground source heat pump, COPsys, heating applications absorbent, refrigeration

Kaynakça

• [1] Ochsner K., Geothermal heat pumps: a guide for planning and installing., 1st ed. London, Earthscan Publications Ltd., (2007).
• [2] Sarbu I., Sebarchievici C., Ground Source Heat Pumps, Fundementals, Experiments and applications, 1st Edition, eBook ISBN: 9780128042410, Academic Press, October (2015).
• [3] Omer AM. Ground-source heat pumps systems and applications, Renewable Sustainable Energy Review, 12: 344-371, (2008).
• [4] Sivasakthivel T, Murugesan K, Sahoo PK., Potential reduction in CO2 emission and saving in electricity by ground source heat pump system for space heating applications-A study on northern part of India, Procedia Engineering, 38: 970-979, (2012).
• [5] Kim E, Lee J, Jeong Y, Hwang Y, Lee S, Park N., Performance evaluation under the actual operating condition of a vertical ground source heat pump system in a school building, Energy Build, 50: 1-6, (2012).
• [6] Esen H., Turgut E., Optimization of operating parameters of a ground coupled heat pump system by Taguchi method, Energy and Building, 107: 329–334, (2015).
• [7] Ramniwas K., Murugesan K., Sahoo P.K., Optimization of operating parameters of ground source heat pump using Taguchi method, in: 23rd IIRConference, Prague, Czech Republic, August 21–26, (2011).
• [8] Pandey N., Murugesan K., Thomas H.R., Optimization of ground heat exchangers for space heating and cooling applications using Taguchi method and utility concept, Applied Energy 190: 421–438, (2017).
• [9] Sivasakthivel T, Murugesan K, Thomas HR., Optimization of operating parameters of ground source heat pump system for space heating and cooling by Taguchi method and utility concept, Applied Energy, 116: 76-85, (2014).
• [10] V. Verma, K. Murugesan, Optimization of solar assisted ground source heat pump system for space heating application by Taguchi method and utilityconcept, Energy and Building, 82: 296–309, (2014).
• [11] Özdemir M. Br, Özkaya Musa Galip, Energy and Exergy Analyses of the Vertical Type Ground-Sourced Heat Pump for Ankara Conditions, Gazi University Journal of Polytechnic, 18(4): 269-280, (2015).
• [12] Pingfang Hu, Qiushi Hu, Yaolin Lin, Wei Yang, Lu Xing,Energy and exergy analysis of a ground source heat pump system for a public building in Wuhan, China under different control strategies, Energy and Buildings, 152: 301-312, (2017).
• [13] Lei Xia , Zhenjun Ma, Craig McLauchlan , Shugang Wang, Experimental investigation and control optimization of a ground source heat pump system, Applied Thermal Engineering, 127: 70-80, (2017).
• [14] VikasVerma, K. Murugesan, Experimental study of solar assisted ground source heat pump system during space heating operation from morning to evening, Journal of Mechanical Science and Technology, 32(1):, 391-398, (2018),
• [15] T. Sivasakthivel, Mikael Philippe , K. Murugesan , VikasVerma, Pingfang Hu, Experimental thermal performance analysis of ground heat exchangers for space heating and cooling applications, Renewable Energy, 113: 1168-1181, (2017).
• [16] Bejan A., Advanced engineering thermodynamics. USA: John Wiley and Sons Inc.; (1988).
• [17] Çengel A.Y., and Boles M. A., Thermodynamics: An Engineering Approach, New Media Version, 6th Edition, Mc Graw Hill, Inc., (2008).
• [18] Holman JP. Experimental methods for engineers. 6th ed. Singapore: McGraw-Hill; (1994).
• [19] S.J. Kline, F.A. McClintock, Describing uncertainties in single sample experiments, Mech. Eng. 75: 3–8, (1953).
• [20] Taguchi G., ElSayed E. A., and Hsiang T. C., Quality Engineering in Production Systems, McGraw–Hill, New York, NY, USA, (1989).
• [21] Ross P.J., Taguchi Techniques for Quality Engineering, 2nd ed., McGraw-Hill, New York, USA, (1996).
• [22] Çakıroğlu R., Acır A., Optimization of cutting parameters on drill bit temperature in drilling by Taguchi method, Measurement, 46(9): 3525-3531, (2013).
• [23] Yang W.H., and Tarng Y.S., Design optimization of cutting parameters for turning operations based on the Taguchi method, Journal of Materials Processing Technology 84: 122–129, (1998).
• [24] Acır A., Canlı M.E., Ata I., Çakıroğlu R., Parametric optimization of energy and exergy analyses of a novel solar air heater with grey relational analysis, Applied Thermal Engineering, 122: 330-338, (2017).
• [25] Çakıroğlu, R., Acır A., Taguchi optimization method of tool chip interface temperature depending on the cutting parameters in drilling operations, Makine Teknolojileri Elektronik Dergisi 10(2): 73-86 (2013).
• [26] Baysal E., Bilginsoy A.K., Acır A., Parametric optimization on exergy analysis of a thermal power plant using Taguchi Method, Energy Education Science and Technology Part A-Energy Science and Research, 29(2): 1313-1326, (2012).
• [27] Zhang J. Z. et. al., Surface roughness optimization in an end-milling operation using the Taguchi design method, Journal of Materials Processing Technology, 184: 233-239, (2007).