Experimental Study for Comparing Heating and Cooling Performance of Thermoelectric Peltier

Yıl 2020, Cilt: 23 Sayı: 3, 889 - 894, 01.09.2020

Faraz Afshari

https://doi.org/10.2339/politeknik.713600

Cited By: 7

Öz

On a global scale it is considered that, a notable part of the overall electrical energy is consumed in refrigeration and air conditioning sectors. Refrigeration sector is also known as an important and critical industry in the field of food and pharmacy sectors. In general refrigeration and also freezing applications are based on the extracting thermal energy from the freezing or cooling medium to keep the temperature at the specified standard levels suitable for storage foods or medicines.
Vapor compression refrigeration systems are mostly employed for cooling, heating and air conditioning purposes, but comparative investigations focused on thermoelectric devices and their efficiency with well-known vapor compression refrigeration systems are less regarded in the literature.
In this study, Peltier thermoelectric performance was obtained in two different ways and the results were compared. First, the COP value was obtained when cooling was carried out in an insulated box and then in different mode, the heating of the box was carried out. It was observed a big difference between COP values of heating and cooling modes. According to the achieved experimental results of this study, the COP or coefficient of performance value in the heating mode is approximately 200% greater than that of cooling mode. 

Anahtar Kelimeler

COP, Energy efficiency, two stage thermoelectric refrigerator

Destekleyen Kurum

Bu çalışmada her hangi bir destek alınmamıştır.

Kaynakça

• Afshari, F., Comakli, O., Lesani, A., Karagoz, S. (2017). Characterization of lubricating oil effects on the performance of reciprocating compressors in air–water heat pumps. International Journal of Refrigeration, 74, 505-516. doi.org/10.1016/j.ijrefrig.2016.11.017 Caglar A (2018). Optimization of operational conditions for a thermoelectric refrigerator and its performance analysis at optimum conditions. International Journal of Refrigeration, 96, 70-77. doi.org/10.1016/j.ijrefrig.2018.09.014 Chang Y W, Chang C C, Ke M T, Chen S L (2009) Thermoelectric air-cooling module for electronic devices. Applied Thermal Engineering, 29(13), 2731-2737. doi.org/10.1016/j.applthermaleng.2009.01.004 Cheng Y H, Shih C (2006) Maximizing the cooling capacity and COP of two-stage thermoelectric coolers through genetic algorithm. Applied Thermal Engineering, 26(8-9), 937-947. doi.org/10.1016/j.applthermaleng.2005.09.016 Dimri N, Tiwari A, Tiwari G N (2017) Thermal modelling of semitransparent photovoltaic thermal (PVT) with thermoelectric cooler (TEC) collector. Energy Conversion and Management, 146, 68-77. doi.org/10.1016/j.enconman.2017.05.017 Enescu D, Ciocia A, Mazza A, Russo A (2017) Solutions based on thermoelectric refrigerators in humanitarian contexts. Sustainable energy technologies and assessments, 22, 134-149. doi.org/10.1016/j.seta.2017.02.016 Gokcek M, Sahin F (2017) Experimental performance investigation of minichannel water cooled-thermoelectric refrigerator. Case Studies in Thermal Engineering, 10, 54-62. doi.org/10.1016/j.csite.2017.03.004 Khanlari A, Sözen A, Variyenli H İ (2018) Simulation and experimental analysis of heat transfer characteristics in the plate type heat exchangers using TiO2/water nanofluid. International Journal of Numerical Methods for Heat Fluid Flow, doi.org/10.1108/HFF-05-2018-0191 Khanlari A, Sözen A, Variyenli H İ, Gürü M (2019) Comparison Between Heat Transfer Characteristics of TiO2/Deionized Water and Kaolin/Deionized Water Nanofluids in the Plate Heat Exchanger. Heat Transfer Research, 50, 5, 435-450, doi: 10.1615/HeatTransRes.2018026288 Manikandan S, Kaushik S C, Yang R (2017) Modified pulse operation of thermoelectric coolers for building cooling applications. Energy Conversion and Management, 140, 145-156. doi.org/10.1016/j.enconman.2017.03.003 Min G, Rowe D M (2006) Experimental evaluation of prototype thermoelectric domestic-refrigerators. Applied Energy, 83(2), 133-152. doi.org/10.1016/j.apenergy.2005.01.002 Navarro-Peris E, Corberan J M, Ancik Z (2015) Evaluation of the potential recovery of compressor heat losses to enhance the efficiency of refrigeration systems by means of thermoelectric generation. Applied Thermal Engineering, 89, 755-762. doi.org/10.1016/j.applthermaleng.2015.06.033 Tan H, Fu H, Yu J (2017) Evaluating optimal cooling temperature of a single-stage thermoelectric cooler using thermodynamic second law. Applied Thermal Engineering, 123, 845-851. doi.org/10.1016/j.applthermaleng.2017.05.182 Wang P, Yang B, Bar-Cohen A (2009) Mini-contact enhanced thermoelectric coolers for on-chip hot spot cooling. Heat Transfer Engineering, 30(9), 736-743. doi.org/10.1080/01457630802678391 Yin E, Li Q, Xuan Y (2017) Thermal resistance analysis and optimization of photovoltaic-thermoelectric hybrid system. Energy Conversion and Management, 143, 188-202. doi.org/10.1016/j.enconman.2017.04.004 Zhang H Y (2010) A general approach in evaluating and optimizing thermoelectric coolers. International journal of refrigeration, 33(6), 1187-1196. doi.org/10.1016/j.ijrefrig.2010.04.007 Zhao D, Tan G (2014) A review of thermoelectric cooling: materials, modeling and applications. Applied Thermal Engineering, 66(1-2), 15-24. doi.org/10.1016/j.applthermaleng.2014.01.074