New Hip Prosthesis Design and Evaluation with Using Finite Element Analysis

Yıl 2022, Cilt: 25 Sayı: 2, 563 - 567, 01.06.2022

Talip Çelik Yasin Kişioğlu

Öz

Two different types of surgery methods, cemented and uncemented, are generally used in surgery applications having advantages and disadvantages for each other in long term use. In particular, the use of traditional hip prostheses has some disadvantages due to mechanical problems that trying to be eliminated by developing many different designs. One of the main problems of the use of hip prostheses is not transferred the bodyweight regularly through the prostheses. In this study, a new hip prosthesis design is developed to transfer the body weight to lower extremity without damaging. Both femur and prostheses were modeled using a 3D solid modeling technique and were mounted to each other. The prepared femur-prostheses pairs were transferred into ANSYS Workbench software to simulate using the Finite Element based technique and subjected to the body weight and muscle forces to calculate stresses and strains. The von Mises stresses on the prostheses were examined to evaluate the prosthesis strength. The maximum axial strain values were obtained and evaluated to determine the stress shielding. Based on the results, the new design prosthesis has the risk of lower stress shielding and lower risk of failure. Therefore, the new hip prosthesis design may be used to eliminate the disadvantages in the traditional hip prostheses.

Anahtar Kelimeler

hip prosthesis design, finite element analysis, stress shielding, strength, failure

Destekleyen Kurum

TÜBİTAK

Proje Numarası

216M316

Teşekkür

The corresponding author also thanks to The Scientific and Technological Research Council of Turkey (TUBITAK) supported by the 2211-C Scholarship program.

Kaynakça

• [1] Çelik T., "Analysis of mechanical stability in orthopedic implants". Doctoral Thesis, Kocaeli University, Turkey, Department of Biomedical Engineering, (2018).
• [2] Ramos A., Completo A., Relvas C., Simoes J. A., "Design process of a novel cemented hip femoral stem concept". Materials & Design, 33: 313-321, (2012).
• [3] Sabatini A. L., Goswami T., "Hip implants VII: Finite element analysis and optimization of cross-sections". Materials & Design, 29(7): 1438-1446, (2008).
• [4] Virulsri C., Tangpornprasert P., Romtrairat P., "Femoral hip prosthesis design for Thais using multi-objective shape optimization". Materials & Design, 68: 1-7, (2015).
• [5] Rho J. Y., Hobatho M. C., Ashman R. B., "Relations of Mechanical-Properties to Density and Ct Numbers in Human Bone". Medical Engineering and Physics, 17(5): 347-355, (1995).
• [6] Rancourt D., Shirazi-Adl A., Drouin G., Paiement G., "Friction properties of the interface between porous-surfaced metals and tibial cancellous bone". Journal of Biomedical Material Research, 24(11): 1503-1519, (1990).
• [7] Sowmianarayanan S., Chandrasekaran A., Kumar R. K., "Finite element analysis of a subtrochanteric fractured femur with dynamic hip screw, dynamic condylar screw, and proximal femur nail implants - a comparative study". Proceedings of the Institution of Mechanical Engineers Part H-Journal of Engineering in Medicine, 222(H1): 117-127, (2008).
• [8] Bergmann G., Deuretzbacher G., Heller M., Graichen F., Rohlmann A., Strauss J., Duda G. N., Hip contact forces and gait patterns from routine activities, Journal Biomechanics, 34(7): 859-871, (2001).
• [9] Duda G. N., Schneider E., Chao E. Y. S., "Internal forces and moments in the femur during walking". Journal of Biomechanics, 30(9): 933-941, (1997).
• [10] Chen W.-P., Tai C.-L., Lee M. S., Lee P.-C., Liu C.-P., Shi C.-H., "Comparison of Stress Shielding among Different Cement Fixation Modes of Femoral Stem in Total Hip Arthroplasty – A Three-Dimensional Finite Element Analysis". Journal of Medical and Biological Engineering, 24(4): 183-187, (2004).
• [11] Goshulak P., Samiezadeh S., Aziz M. S. R., Bougherara H., Zdero R., Schemitsch E. H., "The biomechanical effect of anteversion and modular neck offset on stress shielding for short-stem versus conventional long-stem hip implants". Medical Engineering and Physics, 38(3): 232-240, (2016).
• [12] Ridzwan M. I. Z., Shuib S., Hassan A. Y., Shokri A. A., Ibrahim M. N. M., "Problem of Stress Shielding and Improvement to the Hip Implant Designs: A Review". Journal of Medical Sciences(Faisalabad), 7(3): 460-467, (2007).
• [13] Celik T., Mutlu I., Ozkan A., Kisioglu Y., "The effect of cement on hip stem fixation: a biomechanical study". Australasian Physical and Engineering Science in Medicine, 40(2): 349-357, (2017).
• [14] Bordini B., Stea S., De Clerico M., Strazzari S., Sasdelli A., Toni A., "Factors affecting aseptic loosening of 4750 total hip arthroplasties: multivariate survival analysis". BMC Musculoskeletal Disorders, 8(69): 1-8, (2007).
• [15] Huggler A. H., "The Thrust Plate Prosthesis: A New Experience in Hip Surgery", Springer, Berlin, (1997).