Araştırma Makalesi
BibTex RIS Kaynak Göster

Paça Kıvırma İşleminde Otomat Kullanımının İşlem Süresi ve Kalite Açısından İncelenmesi

Yıl 2019, Cilt: 23 Sayı: 1, 185 - 190, 01.04.2019
https://doi.org/10.19113/sdufenbed.482088

Öz










Dünya
ticaretinde önemli bir paya sahip olan hazır giyim endüstrisi, dünyadaki diğer
emek yoğun sektörler gibi zorlu koşullar içeren rekabet ortamı ile mücadele
etmektedir. Teknolojik gelişmeleri takip etmek ve bu faaliyetlere ayak uydurmak
operasyonel verimliliği olumlu yönde etkileyecektir. Bu nedenle, teknolojik
gelişmeleri şirketlere adapte edebilmek, günümüz iş dünyasında büyük önem arz
etmektedir. Bu çalışmada casual (günlük) pantolonlardaki paça kıvırma
operasyonu incelenmiştir. Paça kıvırma işlemi zor bir işlem olarak tanımlanmasa
da el becerisi gerektirmektedir. Özellikle dar paçalı pantolonlarda, makinenin
(baskı ayağının) altında silindirik paçanın kontrol edilmesi zor olduğundan,
dikim sürelerinin uzamasına ve bazı istenmeyen kalite sorunlarına neden
olabilmektedir. Bu çalışmada, denim pantolonlarda paça kıvırma işleminin klasik
yöntemle ve yeni geliştirilen otomatla gerçekleştirilmiş ve her iki yöntem;
işlem süreleri ve kalite açısından karşılaştırılmıştır. Böylece, verimlilik
(işlem süresi) ve kalite açısından avantajlı yöntem belirlenmiştir. Bu
çalışmada, paça kıvırma işleminde otomat kullanımının
% 33.34
zaman
tasarrufu
sağladığı ve kalite problemlerinin neredeyse yok edildiği görülmektedir.
    

Kaynakça

  • [1] Güner M., 2012, “Konfeksiyon İşletmelerinde Organizasyon ve Planlama”, İzmir, Meta Basım Matbaacılık Hizmetleri, pp: 11
  • [2] Dal, V., 2010, “REFA, MTM ve GSD İş Akış Süresi Belirleme Sistemlerinin Örnek Bir Uygulama İle Karşılaştırılmalı Olarak İncelenmesi”, TUBAV Bilim Dergisi 3 (3), pp: 224-237.
  • [3] İşler, M; Küçük, M; Güner, M; 2014, Konfeksiyon Üretiminde Bir Operasyon İçin İki Farklı Yöntem İle İş Ölçümü Uygulaması, ISITES Karabük pp: 1754-1763.
  • [4] Cömert, M; Doba Kadem, F; 2015, Implementation of a Process Analysis in Sewing Line, Çukurova University Journal of the Faculty of Engineering and Architecture, 30 (1), pp: 151-166.
  • [5] Frank W. Paul, Marvin W. Dixon, (1992) "Advanced Automation for Shirt-collar Manufacturing", International Journal of Clothing Science and Technology, Vol. 4 Iss: 2/3, pp: 26 – 33.
  • [6] Ünal, Z. B.; Erdoğan, M. Ç.; Öndoğan, Z., 2005, The Effects Of Machines Used In Apparel Companies To The Profitability, Journal of Engineering Sciences, 11(2), 249-255.
  • [7] Yücel, Ö, 2007, Failure Mode and Effect Analysis in Clothing Production, Journal of Textile and Apparel, Vol. 2, pp: 126-131.
  • [8] Güner, M; Akman, Ü; Yücel, Ö, 2010, Improving The Man Shirt Production Process Using The Six Sigma Method, Journal of Textile and Apparel, Vol. 1, pp: 75-82.
  • [9] Choi C. K.; Ip W. H., 1999, “A Comparison of MTM and RTM, Work Study” Emerald Article, Vol.48, pp: 57-61.
  • [10] Efatech PC40-V1 Users' Manual, 2015.
  • [11] Efatech Sewing Automation System, http://www.efateknik.com/ (Access date: 05.01.2017)
  • [12] Kanawaty, G. (ed.), 1992, “Introduction to work study (fourth edition)”, Geneva, International Labour Office, pp:337
  • [13] Güner M., 2010, “Tekstil ve Konfeksiyonda İş Etüdü”, İzmir, Ege Üniversitesi Basimevi, pp: 12
  • [14] Coats Bulletin: “Standard stitch type classification guide”, http://kalyaev.com/2011/20110216/stitchtypeclassification.pdf (Access date: 05.01.2017)

Evaluating the Automat Usage for Bottom Hemming Operation in Terms of Process Time and Quality

Yıl 2019, Cilt: 23 Sayı: 1, 185 - 190, 01.04.2019
https://doi.org/10.19113/sdufenbed.482088

Öz










Apparel
industry, which has a major impact on the world trade, has been struggling with
a competitive environment with challenging conditions like the other
labor-intensive sectors all over the world. Following the latest technological
developments and efforts of keeping up with these activities would affect the
operational efficiency in a positive manner. Therefore, being able to adapt
these developments to the companies becomes of great importance in today's
business world. This study investigates the operation of bottom hemming of
casual trousers. Despite the fact that bottom hemming is not defined as a
difficult process, it requires manual skills. The difficulty of controlling the
cylindrical part of the bottom under the machine head (presser foot), especially
for the narrow-bottomed trousers, may cause prolonged sewing process times and
also some undesirable quality problems. In this study, bottom hemming operation
is performed by using both classical method and recently developed bottom
hemming automat, to highlight the comparison between the manual hemming of
denim trousers and usage of automation for this process in terms of duration
and quality. Thus, the advantageous method is defined, from the point of
productivity (process time) and quality.
In this study, it’s observed that 33.34% time saving and eliminations of
quality problems by using automat for bottom hemming operation.
    

Kaynakça

  • [1] Güner M., 2012, “Konfeksiyon İşletmelerinde Organizasyon ve Planlama”, İzmir, Meta Basım Matbaacılık Hizmetleri, pp: 11
  • [2] Dal, V., 2010, “REFA, MTM ve GSD İş Akış Süresi Belirleme Sistemlerinin Örnek Bir Uygulama İle Karşılaştırılmalı Olarak İncelenmesi”, TUBAV Bilim Dergisi 3 (3), pp: 224-237.
  • [3] İşler, M; Küçük, M; Güner, M; 2014, Konfeksiyon Üretiminde Bir Operasyon İçin İki Farklı Yöntem İle İş Ölçümü Uygulaması, ISITES Karabük pp: 1754-1763.
  • [4] Cömert, M; Doba Kadem, F; 2015, Implementation of a Process Analysis in Sewing Line, Çukurova University Journal of the Faculty of Engineering and Architecture, 30 (1), pp: 151-166.
  • [5] Frank W. Paul, Marvin W. Dixon, (1992) "Advanced Automation for Shirt-collar Manufacturing", International Journal of Clothing Science and Technology, Vol. 4 Iss: 2/3, pp: 26 – 33.
  • [6] Ünal, Z. B.; Erdoğan, M. Ç.; Öndoğan, Z., 2005, The Effects Of Machines Used In Apparel Companies To The Profitability, Journal of Engineering Sciences, 11(2), 249-255.
  • [7] Yücel, Ö, 2007, Failure Mode and Effect Analysis in Clothing Production, Journal of Textile and Apparel, Vol. 2, pp: 126-131.
  • [8] Güner, M; Akman, Ü; Yücel, Ö, 2010, Improving The Man Shirt Production Process Using The Six Sigma Method, Journal of Textile and Apparel, Vol. 1, pp: 75-82.
  • [9] Choi C. K.; Ip W. H., 1999, “A Comparison of MTM and RTM, Work Study” Emerald Article, Vol.48, pp: 57-61.
  • [10] Efatech PC40-V1 Users' Manual, 2015.
  • [11] Efatech Sewing Automation System, http://www.efateknik.com/ (Access date: 05.01.2017)
  • [12] Kanawaty, G. (ed.), 1992, “Introduction to work study (fourth edition)”, Geneva, International Labour Office, pp:337
  • [13] Güner M., 2010, “Tekstil ve Konfeksiyonda İş Etüdü”, İzmir, Ege Üniversitesi Basimevi, pp: 12
  • [14] Coats Bulletin: “Standard stitch type classification guide”, http://kalyaev.com/2011/20110216/stitchtypeclassification.pdf (Access date: 05.01.2017)
Toplam 14 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Makaleler
Yazarlar

Serkan Boz 0000-0002-2989-1105

Yayımlanma Tarihi 1 Nisan 2019
Yayımlandığı Sayı Yıl 2019 Cilt: 23 Sayı: 1

Kaynak Göster

APA Boz, S. (2019). Evaluating the Automat Usage for Bottom Hemming Operation in Terms of Process Time and Quality. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 23(1), 185-190. https://doi.org/10.19113/sdufenbed.482088
AMA Boz S. Evaluating the Automat Usage for Bottom Hemming Operation in Terms of Process Time and Quality. SDÜ Fen Bil Enst Der. Nisan 2019;23(1):185-190. doi:10.19113/sdufenbed.482088
Chicago Boz, Serkan. “Evaluating the Automat Usage for Bottom Hemming Operation in Terms of Process Time and Quality”. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi 23, sy. 1 (Nisan 2019): 185-90. https://doi.org/10.19113/sdufenbed.482088.
EndNote Boz S (01 Nisan 2019) Evaluating the Automat Usage for Bottom Hemming Operation in Terms of Process Time and Quality. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi 23 1 185–190.
IEEE S. Boz, “Evaluating the Automat Usage for Bottom Hemming Operation in Terms of Process Time and Quality”, SDÜ Fen Bil Enst Der, c. 23, sy. 1, ss. 185–190, 2019, doi: 10.19113/sdufenbed.482088.
ISNAD Boz, Serkan. “Evaluating the Automat Usage for Bottom Hemming Operation in Terms of Process Time and Quality”. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi 23/1 (Nisan 2019), 185-190. https://doi.org/10.19113/sdufenbed.482088.
JAMA Boz S. Evaluating the Automat Usage for Bottom Hemming Operation in Terms of Process Time and Quality. SDÜ Fen Bil Enst Der. 2019;23:185–190.
MLA Boz, Serkan. “Evaluating the Automat Usage for Bottom Hemming Operation in Terms of Process Time and Quality”. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, c. 23, sy. 1, 2019, ss. 185-90, doi:10.19113/sdufenbed.482088.
Vancouver Boz S. Evaluating the Automat Usage for Bottom Hemming Operation in Terms of Process Time and Quality. SDÜ Fen Bil Enst Der. 2019;23(1):185-90.

e-ISSN: 1308-6529