Günümüzde tarım sektörü, nüfus artışı ve kaynakların sınırlı olması gibi zorluklardan etkilenmektedir. Tarım sektörü için verimliliği artırmak ve kayıpları en aza indirmek büyük önem taşımaktadır. Bu nedenle, teknolojinin getirdiği yeniliklerden yararlanmak, özellikle sürdürülebilir tarım uygulamalarının geliştirilmesinde kritik bir rol oynamaktadır. Yapay zekâ, bu yeniliklerin başında gelmekte olup, tarımsal üretime katkı sağlama potansiyeline sahiptir. Bu çalışmanın temel amacı, bitki sağlığı konusunda çiftçilere hızlı ve doğru bilgiler sağlayarak, hastalıkların yayılmasını önlemek ve tarımsal üretimi optimize etmektir. Bu hedef doğrultusunda, yapay zekâ tabanlı görüntü işleme tekniklerinden yararlanılmıştır. Bu kapsamda, üzüm bitkisi yaprağı üzerinden bağ küllemesi ($Erysiphe$ $necator$), mildiyö ($Plasmopara$ $viticola$) ve bağ uyuzu ($Eriophyes$ $vitis$) hastalıklarının yapay zekâ ile tespiti sağlanmıştır. Hastalık tespiti için yaprak görüntüleri kullanılmış ve bu görüntüler üzerinden sınıflandırma gerçekleştirilmiştir. Çalışma kapsamında, bir kısmı hazır olarak temin edilen, bir kısmı ise bağ, tarla, bahçe gibi ortamlardan cep telefonu kamerası ile manuel olarak elde edilen çeşitli ve dengeli örneklerden oluşan bir karma veri seti oluşturulmuştur. Oluşturulan bu karma veri seti, CNN tabanlı aktarımlı öğrenme yöntemlerinden AlexNet, DarkNet53, Inception-ResNet-V2, Inception-V3, MobileNet-V3, ResNet50, ResNet101, VGG16 ve VGG19 mimarileri üzerinde eğitilmiştir. Eğitim ve test işlemleri sonucunda; %97.45 doğruluk, %8.19 eğitim kaybı, %93.00 test doğruluğu ve %20.60 test kaybı değerleri ile en başarılı model olarak Inception-ResNet-V2 belirlenmiştir. Bu sonuç, modelin hem eğitim hem de test verilerinde üzüm bitkisi yaprağı üzerinden hastalık tespiti için yüksek performans gösterdiğini ortaya koymaktadır.
Yapay zekâ Transfer öğrenmesi Bitki hastalığı tespiti Üzüm yaprağı hastalıkları Evrişimli sinir ağları.
Today, the agricultural sector faces significant challenges due to population growth and limited resources. Enhancing productivity and minimizing losses is of great importance for the sustainability of agriculture. Therefore, leveraging technological advancements plays a critical role, particularly in the development of sustainable farming practices. Among these advancements, artificial intelligence (AI) stands out with its potential to contribute significantly to agricultural production. The primary objective of this study is to provide farmers with fast and accurate information regarding plant health, thereby preventing the spread of diseases and optimizing agricultural output. In line with this goal, AI-based image processing techniques were employed. Specifically, this study focuses on detecting grapevine leaf diseases namely powdery mildew ($Erysiphe$ $necator$), downy mildew ($Plasmopara$ $viticola$), and grapevine rust mite ($Eriophyes$ $vitis$) using AI. Disease detection was carried out using leaf images, which were then used for classification. A hybrid dataset was constructed using a combination of publicly available images and manually collected samples captured via smartphone cameras in vineyards, fields, and gardens. This diverse and balanced dataset was used to train several CNN-based transfer learning models, including AlexNet, DarkNet53, Inception-ResNet-V2, Inception-V3, MobileNet-V3, ResNet50, ResNet101, VGG16, and VGG19 architectures. Among these, Inception-ResNet-V2 achieved the best performance with an accuracy of 97.45%, a training loss of 8.19%, a test accuracy of 93.00%, and a test loss of 20.60%. These results demonstrate that the model performs well in detecting diseases from grapevine leaves during both training and testing phases.
Artificial intelligence Transfer learning Plant disease detection Grape leaf diseases Convolutional neural networks.
This study does not require ethics committee permission or any special permission.
The authors have not received any financial support for the research. authorship or publication of this study.
| Birincil Dil | İngilizce |
|---|---|
| Konular | Yazılım Mühendisliği (Diğer) |
| Bölüm | Araştırma Makalesi |
| Yazarlar | |
| Gönderilme Tarihi | 24 Temmuz 2025 |
| Kabul Tarihi | 6 Ekim 2025 |
| Yayımlanma Tarihi | 24 Aralık 2025 |
| Yayımlandığı Sayı | Yıl 2025 Cilt: 10 Sayı: 2 |