HIZ TEMELLİ ANTRENMANLARDA KULLANIM AMACIYLA GELİŞTİRİLEN BİR LİNEER TRANSDÜSERİN GÜVENİRLİĞİ VE GEÇERLİĞİ

Yıl 2024, Cilt: 22 Sayı: 2, 47 - 58, 30.07.2024

İzzet İnce

https://doi.org/10.33689/spormetre.1375297

Öz

Hız temelli kuvvet antrenmanları, son yıllarda büyük ilgi gören bir yaklaşım olarak dikkat çekmektedir. Bu yöntemin uygulanmasında en sık tercih edilen cihazlar lineer transdüserlerdir. Bu araştırmada, donanımı ve yazılımı yazar tarafından geliştirilen bir lineer transdüserin güvenirlik ve geçerliğinin değerlendirilmesi amaçlanmıştır. Optik kodlayıcı, bluetooth ve Wi-Fi modülü ile donatılmış bir mikrodenetleyiciden oluşan bu lineer transdüser, kriter cihaz Tendo Power Analyzer ile karşılaştırılmıştır. Araştırmaya 13 halterci gönüllü olarak katılmıştır. Silkme çekişi esnasında farklı yüklerle (%40, %60, %90 ve %110 1TM) gerçekleştirilen eş zamanlı maksimum hız ölçümleri alınarak geçerlik değerlendirilmiş; bir hafta arayla, aynı saatte ve aynı test prosedürleri uygulanarak test-tekrar test güvenirliği incelenmiştir. Güvenirlik analizi için sınıf içi korelasyon katsayısı (ICC), varyasyon katsayısı (CV), ölçümlerin standart hatası (SEM) ve minimum tespit edilebilir değişim (MDC) hesaplanmıştır. Geçerlik, eşli örneklemler t-testi, regresyon analizi ve Bland-Altman analizi kullanılarak değerlendirilmiştir. ICC değerleri 0.85 ile 0.96 arasında değişmiş, CV değerleri %1.62 ile %4.12 arasında bulunmuştur. SEM değerleri 0.045 m·s⁻¹ ile 0.084 m·s⁻¹ arasında hesaplanmış, MDC değerleri ise 0.137 m·s⁻¹ ile 0.236 m·s⁻¹ arasında değişmiştir. Bland-Altman grafiklerine göre, farklar rastgele bir dağılım göstermiş ve sistematik (sabit veya oransal) bir sapma gözlenmemiştir. Regresyon analizleri sonucunda da sabit veya oransal sapma tespit edilmemiştir. Analiz sonuçları, geliştirilen cihazın silkme çekişi esnasında farklı yüklerle gerçekleştirilen maksimal hız ölçümlerinde güvenilir ve geçerli olduğunu ortaya koymaktadır.

Anahtar Kelimeler

kuvvet antrenmanı, nöromüsküler performans, kuvvet ve kondisyon, halter

VALIDITY AND RELIABILITY OF A LINEAR TRANSDUCER DEVELOPED FOR USE IN VELOCITY-BASED TRAINING

Öz

Velocity-based strength training (VBT) has gained significant attention in recent years. The most preferred devices for implementing this method are linear position transducers (LPT). This study aimed to evaluate the reliability and validity of an LPT developed by the author, which includes both hardware and software components. The LPT, consisting of an optical encoder, Bluetooth, and Wi-Fi modules integrated into a microcontroller, was compared against the criterion device, the Tendo Power Analyzer. Thirteen weightlifters volunteered to participate in the study. Validity was assessed through simultaneous measurements of peak velocity during the clean pull exercise at various loads (40%, 60%, 90%, and 110% of 1RM), while test-retest reliability was evaluated by repeating the same test protocols at the same time of day, one week apart. Reliability analysis included calculating the intraclass correlation coefficient (ICC), coefficient of variation (CV), standard error of measurement (SEM), and minimum detectable change (MDC). Validity was assessed using paired samples t-test, regression analysis, and Bland-Altman analysis. The ICC values ranged from 0.85 to 0.96, and the CV values ranged from 1.62% to 4.12%. The SEM values were calculated to be between 0.045 m·s⁻¹ and 0.084 m·s⁻¹, while the MDC values ranged from 0.137 m·s⁻¹ to 0.236 m·s⁻¹. The differences were randomly distributed, with no systematic (fixed or proportional) bias observed in Bland-Altman plots. Similarly, regression analyses revealed no fixed or proportional bias. The results of the analyses demonstrate that the developed LPT is reliable and valid for measuring peak velocity during clean pull exercises across different loads.

Anahtar Kelimeler

Weightlifting, strength training, neuromuscular performance, strength and conditioning

Kaynakça

• Atkinson, G., & Nevill, A. M. (1998). Statistical Methods For Assessing Measurement Error (Reliability) in Variables Relevant to Sports Medicine. Sports Medicine, 26(4), 217-238. https://doi.org/10.2165/00007256-199826040-00002
• Beckerman, H., Roebroeck, M., Lankhorst, G., Becher, J., Bezemer, P. D., & Verbeek, A. (2001). Smallest real difference, a link between reproducibility and responsiveness. Quality of Life Research, 10, 571-578.
• Beckham, G., Suchomel, T., & Mizuguchi, S. (2014). Force plate use in performance monitoring and sport science testing. New Studies in Athletics, 29(3), 25-37.
• Conceição, F., Fernandes, J., Lewis, M., Gonzaléz-Badillo, J. J., & Jimenéz-Reyes, P. (2016). Movement velocity as a measure of exercise intensity in three lower limb exercises. Journal of sports sciences, 34(12), 1099-1106.
• Courel-Ibanez, J., Martinez-Cava, A., Moran-Navarro, R., Escribano-Penas, P., Chavarren-Cabrero, J., Gonzalez-Badillo, J. J., & Pallares, J. G. (2019). Reproducibility and repeatability of five different technologies for bar velocity measurement in resistance training. Ann Biomed Eng, 47(7), 1523-1538. https://doi.org/10.1007/s10439-019-02265-6
• García-Ramos, A., Pestaña-Melero, F. L., Pérez-Castilla, A., Rojas, F. J., & Haff, G. G. Differences in the Load-Velocity Profile Between Four Bench Press Variants. International journal of sports physiology and performance.
• Garnacho-Castaño, M. V., López-Lastra, S., & Maté-Muñoz, J. L. (2015). Reliability and validity assessment of a linear position transducer. Journal of sports science & medicine, 14(1), 128.
• Gonzalez, A. M., Mangine, G. T., Spitz, R. W., Ghigiarelli, J. J., & Sell, K. M. (2019). Agreement between the Open Barbell and Tendo linear position transducers for monitoring barbell velocity during resistance exercise. Sports, 7(5), 125.
• Harris, N. K., Cronin, J., Taylor, K.-L., Boris, J., & Sheppard, J. (2010). Understanding position transducer technology for strength and conditioning practitioners. Strength & Conditioning Journal, 32(4), 66-79.
• Hopkins, W. G. (2000). Measures of reliability in sports medicine and science. Sports Medicine, 30, 1-15.
• Hopkins, W. G. (2014). A scale of magnitudes for effect statistics. 2002. A new view of statistics from http://sportsci. org/resource/stats/effectmag. html. Accessed, 1.
• Ince, I., & Ulupinar, S. (2020). Prediction of competition performance via selected strength-power tests in junior weightlifters. The Journal of sports medicine and physical fitness, 60(2), 236-243.
• İnce, İ., Ulupınar, S., & Özbay, S. (2020). Body composition isokinetic knee extensor strength and balance as predictors of competition performance in junior weightlifters. Isokinetics and Exercise Science, 28(2), 215-222.
• Jidovtseff, B., Harris, N. K., Crielaard, J.-M., & Cronin, J. B. (2011). Using the load-velocity relationship for 1RM prediction. The Journal of Strength & Conditioning Research, 25(1), 267-270.
• Koo, T. K., & Li, M. Y. (2016). A guideline of selecting and reporting intraclass correlation coefficients for reliability research. Journal of chiropractic medicine, 15(2), 155-163.
• Ludbrook, J. (1997). Special article comparing methods of measurement. Clinical and Experimental Pharmacology and Physiology, 24(2), 193-203. https://doi.org/https://doi.org/10.1111/j.1440-1681.1997.tb01807.x
• Martinez-Cava, A., Hernandez-Belmonte, A., Courel-Ibanez, J., Moran-Navarro, R., Gonzalez-Badillo, J. J., & Pallares, J. G. (2020). Reliability of technologies to measure the barbell velocity: Implications for monitoring resistance training. PLoS One, 15(6), e0232465. https://doi.org/10.1371/journal.pone.0232465
• Pareja‐Blanco, F., Alcazar, J., Cornejo‐Daza, P. J., Sánchez‐Valdepeñas, J., Rodriguez‐Lopez, C., Hidalgo‐de Mora, J., Sánchez‐Moreno, M., Bachero‐Mena, B., Alegre, L. M., & Ortega‐Becerra, M. (2020). Effects of velocity loss in the bench press exercise on strength gains, neuromuscular adaptations, and muscle hypertrophy. Scandinavian journal of medicine & science in sports, 30(11), 2154-2166.
• Perez-Castilla, A., Piepoli, A., Delgado-García, G., Garrido-Blanca, G., & García-Ramos, A. (2019). Reliability and concurrent validity of seven commercially available devices for the assessment of movement velocity at different intensities during the bench press. The Journal of Strength & Conditioning Research, 33(5), 1258-1265.
• Pérez-Castilla, A., Piepoli, A., Garrido-Blanca, G., Delgado-García, G., Balsalobre-Fernández, C., & García-Ramos, A. (2019). Precision of 7 commercially available devices for predicting bench-press 1-repetition maximum from the individual load–velocity relationship. International journal of sports physiology and performance, 14(10), 1442-1446. https://doi.org/10.1123/ijspp.2018-0801
• Randell, A. D., Cronin, J. B., Keogh, J. W., Gill, N. D., & Pedersen, M. C. (2011). Effect of instantaneous performance feedback during 6 weeks of velocity-based resistance training on sport-specific performance tests. The Journal of Strength & Conditioning Research, 25(1), 87-93.
• Sanchez-Medina, L., & González-Badillo, J. J. (2011). Velocity loss as an indicator of neuromuscular fatigue during resistance training. Medicine and science in sports and exercise, 43(9), 1725-1734.
• Suchomel, T. J., Techmanski, B. S., Kissick, C. R., & Comfort, P. (2023). Reliability, validity, and comparison of barbell velocity measurement devices during the jump shrug and hang high pull. Journal of Functional Morphology and Kinesiology, 8(1), 35.
• Thompson, S. W., Rogerson, D., Dorrell, H. F., Ruddock, A., & Barnes, A. (2020). The reliability and validity of current technologies for measuring barbell velocity in the free-weight back squat and power clean. Sports, 8(7), 94.
• Ulupınar, S., & İzzet, İ. (2021). Spor bilimlerinde etki büyüklüğü ve alternatif istatistik yaklaşımları. Spormetre Beden Eğitimi ve Spor Bilimleri Dergisi, 19(1), 1-17.