Comparison of Tangent Curve Method and Reciprocal Slope Transformation Method for Describing Mechanical Behaviour of Jatropha Curcas L. Bulk Seeds Under Compression Loading

David Herak; Abraham Kabutey; Petr Hrabe

Comparison of Tangent Curve Method and Reciprocal Slope Transformation Method for Describing Mechanical Behaviour of Jatropha Curcas L. Bulk Seeds Under Compression Loading

Öz

The study investigates the use of two different methods for the description of

deformation characteristics of Jatropha curcas L. bulk seed in linear compression. These methods

include the tangent curve and reciprocal slope transformation. The merits and limitations of both

methods were also compared. The different methods were used for development of mathematical

equations for fitting experimental data describing the mechanical behaviour of Jatropha bulk seed.

Pressing vessel diameter 60 mm was used to compress the bulk Jatropha seed which was

measured at pressing height 80 mm. For tangent curve method, the experimental data was fitted

by using the Marquardt Levenberg process whiles the Least Square Method (LSM) satisfies the

reciprocal slope transformation method. Statistical analysis of both experimental and fitted data

coefficients of reciprocal slope transformation and tangent curve methods indicated significant

results with high coefficient of determination which suggests the suitability of both methods for the

description of deformation characteristic of Jatropha curcas L. bulk seed in linear compression.

Anahtar Kelimeler

Oil bearing bulk seed,mathematical model,force deformation curve,Marquardt Levenberg Process

Kaynakça

Blahovec J., 2008. Agromaterials. CULS Prague.
Blahovec J., 2011. Reciprocal slope transformation applied to physical problems. Applied Mathematics Letters, 24 (12): 2038 – 2041.
Blahovec J., S. Yanniotis, 2009. Modified classification of sorption isotherms. Journal of Food Engineering, 91: 72 – 77.
Herak D., J. Blahovec, A. Kabutey, 2014. Analysis of the axial pressing of bulk Jatropha curcas L. seeds using reciprocal slope transformation. Biosystems Engineering, 121: 67 – 76.
Herak D., A. Kabutey, M. Divisova, S. Simanjuntak, 2013. Mathematical model of mechanical behaviour of Jatropha curcas L. seeds under compression loading. Biosystems Engineering, 114 (3): 279-278.
Kabutey A., D. Herak, R. Choteborsky, O. Dajbych, M. Divisova, W. E. Boatri, 2013. Linear pressing analysis of Jatropha curcas L seeds using different pressing vessel diameters and seed pressing heights. Biosystems Engineering, 115 (1): 42–49.
Fasino O. O., O. O. Ajibola, 1990. Development of equations for the yield of oil expressed from conophor nut. Journal of Agricultural Engineering Research, 46: 45-53.
Marquardt D. W., 1963. An Algorithm for the Least-Squares Estimation of Nonlinear Parameters, SIAM. Journal of Applied Mathematics, 11 (2): 431-441.

Ayrıntılar

Birincil Dil

İngilizce

Konular

-

Bölüm

Araştırma Makalesi

Yazarlar

David Herak Bu kişi benim

Abraham Kabutey Bu kişi benim

Petr Hrabe Bu kişi benim

Yayımlanma Tarihi

1 Nisan 2014

Gönderilme Tarihi

15 Mayıs 2014

Kabul Tarihi

15 Temmuz 2014

Yayımlandığı Sayı

Yıl 2014 Cilt: 10 Sayı: 2

IZ

https://izlik.org/JA24PC82NS

Kaynak Göster

RIS / Bibtex

APA

Herak, D., Kabutey, A., & Hrabe, P. (2014). Comparison of Tangent Curve Method and Reciprocal Slope Transformation Method for Describing Mechanical Behaviour of Jatropha Curcas L. Bulk Seeds Under Compression Loading. Tarım Makinaları Bilimi Dergisi, 10(2), 83-86. https://izlik.org/JA24PC82NS

AMA

1.Herak D, Kabutey A, Hrabe P. Comparison of Tangent Curve Method and Reciprocal Slope Transformation Method for Describing Mechanical Behaviour of Jatropha Curcas L. Bulk Seeds Under Compression Loading. JAMS. 2014;10(2):83-86. https://izlik.org/JA24PC82NS

Chicago

Herak, David, Abraham Kabutey, ve Petr Hrabe. 2014. “Comparison of Tangent Curve Method and Reciprocal Slope Transformation Method for Describing Mechanical Behaviour of Jatropha Curcas L. Bulk Seeds Under Compression Loading”. Tarım Makinaları Bilimi Dergisi 10 (2): 83-86. https://izlik.org/JA24PC82NS.

EndNote

Herak D, Kabutey A, Hrabe P (01 Nisan 2014) Comparison of Tangent Curve Method and Reciprocal Slope Transformation Method for Describing Mechanical Behaviour of Jatropha Curcas L. Bulk Seeds Under Compression Loading. Tarım Makinaları Bilimi Dergisi 10 2 83–86.

IEEE

[1]D. Herak, A. Kabutey, ve P. Hrabe, “Comparison of Tangent Curve Method and Reciprocal Slope Transformation Method for Describing Mechanical Behaviour of Jatropha Curcas L. Bulk Seeds Under Compression Loading”, JAMS, c. 10, sy 2, ss. 83–86, Nis. 2014, [çevrimiçi]. Erişim adresi: https://izlik.org/JA24PC82NS

ISNAD

Herak, David - Kabutey, Abraham - Hrabe, Petr. “Comparison of Tangent Curve Method and Reciprocal Slope Transformation Method for Describing Mechanical Behaviour of Jatropha Curcas L. Bulk Seeds Under Compression Loading”. Tarım Makinaları Bilimi Dergisi 10/2 (01 Nisan 2014): 83-86. https://izlik.org/JA24PC82NS.

JAMA

1.Herak D, Kabutey A, Hrabe P. Comparison of Tangent Curve Method and Reciprocal Slope Transformation Method for Describing Mechanical Behaviour of Jatropha Curcas L. Bulk Seeds Under Compression Loading. JAMS. 2014;10:83–86.

MLA

Herak, David, vd. “Comparison of Tangent Curve Method and Reciprocal Slope Transformation Method for Describing Mechanical Behaviour of Jatropha Curcas L. Bulk Seeds Under Compression Loading”. Tarım Makinaları Bilimi Dergisi, c. 10, sy 2, Nisan 2014, ss. 83-86, https://izlik.org/JA24PC82NS.

Vancouver

1.David Herak, Abraham Kabutey, Petr Hrabe. Comparison of Tangent Curve Method and Reciprocal Slope Transformation Method for Describing Mechanical Behaviour of Jatropha Curcas L. Bulk Seeds Under Compression Loading. JAMS [Internet]. 01 Nisan 2014;10(2):83-6. Erişim adresi: https://izlik.org/JA24PC82NS