Investigation of Aerodynamic Performance of NACA0015 and NACA2415 as Vertical Axis Wind Turbine Blade with Guide Vane

Öz

Airfoils are widely used in fluid flow applications such as aircraft, vehicles, and particularly in the blades of wind turbines, where aerodynamic efficiency plays a key role in enhancing performance and supporting sustainability. In this study, experimental investigations were carried out on two airfoil profiles commonly used in Darieus type vertical axis wind turbine applications: NACA 0015 and NACA 2415. The experiments are performed in two main parts: aerodynamic force measurements and surface oil flow visualization. In the first part, the aerodynamic performance of both airfoils is analyzed under two main configurations: the baseline model without guide vanes, and modified setups incorporating guide vanes with arc lengths increasing in 10° increments, up to a maximum of 50°. The effects of guide vane integration on the lift and drag characteristics are evaluated and compared. Graphs showing the variation of lift coefficient (CL) and drag coefficient (CD) with angle of attack (AoA) are provided for each case and for multiple freestream velocities. These results aim to highlight the influence of guide vane implementation on aerodynamic force generation and overall performance enhancement.

Anahtar Kelimeler

• Vertical axis wind turbine
• Guide vane
• Aerodynamic performance
• Flow visualization

Teşekkür

The author would like to express their gratitude to the Propulsion Laboratory at Adana Alparslan Türkeş Science and Technology University for their valuable support and resources throughout this study.

Yönlendirici Kanatlı Dikey Eksenli Rüzgar Türbini Kanadı Olarak NACA0015 ve NACA2415 Profillerinin Aerodinamik Performansının İncelenmesi

Öz

Kanat profilleri, uçaklar, araçlar ve özellikle rüzgar türbinlerinin kanatlarında olmak üzere akışkan akışının söz konusu olduğu uygulamalarda yaygın olarak kullanılmaktadır. Bu yapılarda aerodinamik verimlilik, performansı artırmak ve sürdürülebilirliği desteklemek açısından önemli bir rol oynamaktadır. Bu çalışmada, Darieus tipi dikey eksenli rüzgar türbini uygulamalarında yaygın olarak kullanılan iki kanat profili olan NACA 0015 ve NACA 2415 üzerinde deneysel araştırmalar gerçekleştirilmiştir. Deneyler iki ana bölümde yürütülmüştür: aerodinamik kuvvet ölçümleri ve yüzey yağ akışı görselleştirmesi. İlk bölümde, her iki kanat profilinin aerodinamik performansı, yönlendirici kanat içermeyen temel model ve 10°’lik açı aralıkları ile 50°’ye kadar çıkan yay uzunluklarında yönlendirici kanatların entegre edildiği modifiye konfigürasyonlar altında analiz edilmiştir. Yönlendirici kanat entegrasyonunun kaldırma ve sürükleme karakteristikleri üzerindeki etkileri değerlendirilmiş ve karşılaştırılmıştır. Her bir durum ve farklı serbest akış hızları için kaldırma katsayısı ve sürükleme katsayısı ile hücum açısı arasındaki değişimi gösteren grafikler sunulmuştur. Bu sonuçlar, yönlendirici kanat uygulamasının aerodinamik kuvvet üretimi ve genel performans artışı üzerindeki etkisini ortaya koymayı amaçlamaktadır.

Anahtar Kelimeler

• Dikey eksenli rüzgar türbini
• Yönlendirici kanat
• Aerodinamik performans
• Akış görselleştirme

Kaynakça

1. Roga S, Bardhan S, Kumar Y, Dubey SK. Recent technology and challenges of wind energy generation: A review. Sustainable Energy Technol. Asses. 2022;52:102239.
2. Škvorc P, Kozmar H. Wind energy harnessing on tall buildings in urban environments. Renewable Sustainable Energy Rev. 2021;152:111662.
3. Stout C, Islam S, White A, Arnott S, Kollovozi E, Shaw M, et al. Efficiency improvement of vertical axis wind turbines with an upstream deflector. Energy Procedia. 2017;118:141-8.
4. Battisti L, Benini E, Brighenti A, Dell’Anna S, Castelli MR. Small wind turbine effectiveness in the urban environment. Renewable Energy. 2018;129:102-13.
5. Bouzaher MT, Hadid M, Semch-Eddine D. Flow control for the vertical axis wind turbine by means of flapping flexible foils. J. Braz. Soc. Mech. Sci. Eng. 2017;39:457-70.
6. Zhao P, Jiang Y, Liu S, Stoesser T, Zou L, Wang K. Investigation of fundamental mechanism leading to the performance improvement of vertical axis wind turbines by deflector. Energy Convers. Manage. 2021; 247:114680.
7. Jin X, Zhao G, Gao K, Ju W. Darrieus vertical axis wind turbine: Basic research methods. Renewable Sustainable Energy Rev. 2015;42:212-25.
8. Wang Y, Sun X, Dong X, Zhu B, Huang D, Zheng Z. Numerical investigation on aerodynamic performance of a novel vertical axis wind turbine with adaptive blades. Energy Convers. Manage. 2016;108:275-286.

9. Wang Y, Shen S, Li G, Huang D, Zheng Z. Investigation on aerodynamic performance of vertical axis wind turbine with different series airfoil shapes. Renewable Energy. 2018;126:801-818.
10. Çelik Y. Task-Specific Airfoil Design for Fixed-Wing UAVs in High-Climb Reconnaissance Missions: A CST and XFOIL-Based Approach. TJNS. 2025;14:66–84.
11. Tiainen J, Grönman A, Jaatinen-Värri A, Pyy L. Effect of non-ideally manufactured riblets on airfoil and wind turbine performance. Renewable Energy.2020;155:79-89.
12. Fernandez-Gamiz U, Zulueta E, Boyano A, Ansoategui I, Uriarte I. Five megawatt wind turbine power output improvements by passive flow control devices. Energies. 2017;10(6):742.
13. Sunny KA, Kumar P, Kumar NM. Experimental study on novel curved blade vertical axis wind turbines. Results Eng. 2020;7:100149.
14. Karmakar SD, Chattopadhyay H. A review of augmentation methods to enhance the performance of vertical axis wind turbine. Sustainable Energy Technol Asses. 2022;53:102469.
15. Takao M, Kuma H, Maeda T, Kamada Y, Oki M, Minoda A. A straight-bladed vertical axis wind turbine with a directed guide vane row—Effect of guide vane geometry on the performance. J Therm Sci. 2009;18:54-57.
16. Yahya W, Ziming K, Juan W, Qurashi MS, Al-Nehari M, Salim E. Influence of tilt angle and the number of guide vane blades towards the Savonius rotor performance. Energy Rep. 2021;7:3317-3327.
17. Ghafoorian F, Mirmotahari SR, Wan H. Numerical study on aerodynamic performance improvement and efficiency enhancement of the Savonius vertical axis wind turbine with semi-directional airfoil guide vane. Ocean Eng. 2024;307:118186.
18. Aboelezz A, Ghali H, Elbayomi G, Madboli M. A novel VAWT passive flow control numerical and experimental investigations: Guided vane airfoil wind turbine. Ocean Eng. 2022;257:111704.
19. Chong WT, Fazlizan A, Poh SC, Pan KC, Hew WP, Hsiao FB. The design, simulation and testing of an urban vertical axis wind turbine with the omni-direction-guide-vane. Appl Energy. 2013;112:601-609.
20. Shahizare B, Nazri Bin Nik Ghazali N, Chong WT, Tabatabaeikia SS, Izadyar N. Investigation of the optimal omni-direction-guide-vane design for vertical axis wind turbines based on unsteady flow CFD simulation. Energies. 2016;9:146.
21. Kim D, Gharib M. Efficiency improvement of straight-bladed vertical-axis wind turbines with an upstream deflector. J Wind Eng Ind Aerodyn. 2013;115:48-52.
22. Zidane IF, Ali HM, Swadener G, Eldrainy YA, Shehata AI. Effect of upstream deflector utilization on H-Darrieus wind turbine performance: An optimization study. Alexandria Eng J. 2023;63:175-189.
23. Coleman HW, Steele WG. Engineering application of experimental uncertainty analysis. AIAA J. 1995;33(10):1888-96.
24. Mondal R, Alam MM. Blockage effect on wakes of various bluff bodies: A review of confined flow. Ocean Eng. 2023;286:115592.