Investigation of the Effect of Bioactive Glass Coating on the Corrosion Behavior of Pre-treated Ti6Al4V Alloy

Yıl 2024, Sayı: 1, 87 - 91, 01.10.2024

Şükran Merve Tüzemen , Yusuf Burak Bozkurt , Burak Atik , Yakup Uzun , Ayhan Çelik

https://doi.org/10.46810/tdfd.1425792

Öz

Titanium alloys, especially Ti6Al4V, are widely used in in-body implants due to their superior mechanical properties, corrosion resistance and biocompatibility. However, due to their higher modulus of elasticity than bone, they do not bond well with the bone structure, leading to loosening. In addition, they contain the elements Al and V, both of which are dangerous when released into the body. Therefore, these alloys are subjected to a number of surface treatments to improve their surface properties. In this study, Ti6Al4V alloys were produced by selective laser melting in dimensions of 10x10x2 mm3 and then surface treated. The alloy surfaces were first anodized and then coated with 45S5 bioglass powder. After all surface processes, structural analyzes were performed and the effectiveness of the coating was examined. The untreated and coated samples were subjected to corrosion tests by cyclic polarization method and their corrosion behaviors were investigated.

Anahtar Kelimeler

Ti6Al4V, 45S5 Bioglass, Anodizing, Corrosion

Kaynakça

• Molina J, Valero-Gómez A, Belda, J, Bosch F, Bernabé-Quispe P, Tormo-Mas MA. Long-term antibacterial Ag+-release biomaterials based on anodized Ti6Al4V and silver nanoparticles. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2023; 676(B): 1-15.
• Atik, B., Bozkurt, Y. B., Kavasoğlu, Y. S., Kovacı, H., & Çelik, A. (2024). Pitting corrosion performance of plasma oxidized Cp-Ti and effects of fabrication methods. Surface and Coatings Technology, 130384.
• Zhang LC, Chen, LY. A review on biomedical titanium alloys: recent progress and prospect. Adv. Eng. Mater. 2019; 21: 1801215.
• Magesh S, Vasanth G, Revathi A, Geeth M. Use of nanostructured materials in implants, in: R. Narayan (Ed.). Nanobiomaterials, Nanostructured Materials for Biomedical Applications, Woodhead Publishing. 2018; 481-501.
• Leban MB, Kosec T, Finšgar M. Corrosion characterization and ion release in SLM-manufactured and wrought Ti6Al4V alloy in an oral environment. Corrosion Science. 2022; 209: 1-15.
• Mei S, Wang H, Wang W, Tong L, Pan H, Ruan C, Ma Q, Liu M, Yang H, Zhang L, Cheng Y, Zhang Y, Zhao L, Chu PK. Antibacterial effects and biocompatibility of titanium surfaces with graded silver incorporation in titania nanotubes. Biomaterials. 2014; 35: 4255-4265.
• He W, Yin X, Xie L, Liu Z, Li J, Zou S, Chen J. Enhancing osseointegration of titanium implants through large-grit sandblasting combined with micro-arc oxidation surface modification. J. Mater. Sci: Mater. Med. 2019; 30: 73.
• Herrero-Climent M, Lázaro P, Vicente Rios J, Lluch S, Marqués M, Guillem-Martí J, Gil FJ. Influence of acid-etching after grit-blasted on osseointegration of titanium dental implants: in vitro and in vivo studies. J. Mater. Sci.: Mater. Med. 2013; 24: 2047-2055.
• Jarosz M, Grudzień J, Kapusta-Kołodziej J, Chudecka A, Sołtys M, Sulka GD. Anodizing of titanium alloys for biomedical applications, in: G.D. Sulka (Ed.), Nanostructured Anodic Metal Oxides Synthesis and Applications. Elsevier. 2020; 211-275.
• Cheung KH, Pabbruwe MB, Chen W, Koshy P, Sorrell CC. Effects of substrate preparation on TiO2 morphology and topography during anodization of biomedical Ti6Al4V. Materials Chemistry and Physics. 2020; 252: 1-13.
• Acharya S, Suwas S, Chatterjee K. Review of recent developments in surface nanocrystallization of metallic biomaterials. Nanoscale. 2021; 13: 2286-2301.
• Cai Q, Paulose M, Varghese OK, Grimes CA. The effect of electrolyte composition on the fabrication of self-organized titanium oxide nanotube arrays by anodic oxidation. J. Mater. Res. 2005; 20: 230-236.
• Cheung KH, Pabbruwe MB, Chen W, Koshy P, Sorrell CC. Thermodynamic and microstructural analyses of photocatalytic TiO2 from the anodization of biomedical-grade Ti6Al4V in phosphoric acid or sulfuric acid. Ceramics International. 2020; 47(2): 1609-1624.
• Rumble JR. Electro Thermo, Solution chemistry. CRC Handbook of Chemistry and Physics, 98th Edition, CRC Press/Taylor&Francis, Boca Raton, FL. 2018; 86.
• Lausmaa J, Kasemo B, Mattsson H, Odelius H. Multi-technique surface charaterization of oxide films on electropolished and anodically oxidized titanium. Appl. Surf. Sci. 1990; 45: 189-200.
• Tay BK, Patel VV, Bradford DS. Calcium sulfate- and calcium phosphatebased bone substitutes. Orthop. Clin. 1999; 30: 615-623.
• Kunze J, Müller L, Macak JM, Greil P, Schmuki P, Müller FA. Time-dependent growth of biomimetic apatite on anodic TiO2 nanotubes. Electrochim. Acta. 2008; 53: 6995-7003.
• Roguska A, Pisarek M, Andrzejczuk M, Lewandowska M, Kurzydlowski KJ, Janik-Czachor M. Surface characterization of Ca-P/Ag/TiO2 nanotube composite layers on Ti intended for biomedical applications. J. Biomed. Mater. Res. Part A. 2012; 100A: 1954–1962.
• Pawlik A, Rehman MAU, Nawaz Q, Bastan FE, Sulka GD, Boccaccini AR. Fabrication and characterization of electrophoretically deposited chitosan-hydroxyapatite composite coatings on anodic titanium dioxide layers. Electrochim. Acta. 2009; 307: 465-473.
• Rajyalakshmi A, Ercan B, Balasubramanian K, Webster TJ. Reduced adhesion of macrophages on anodized titanium with select nanotube surface features. Int. J. Nanomedicine. 2011; 6: 1765-1771.
• Boccaccini AR, Peters C, Roether JA, Eifler D, Misra SK, Minay EJ. Electrophoretic deposition of polyetheretherketone (PEEK) and PEEK/Bioglass® coatings on NiTi shape memory alloy wires. J. Mater. Sci. 2006; 41: 8152-8159.
• Pishbin F, Simchi A, Ryan MP, Boccaccini AR. Electrophoretic deposition of chitosan/45S5 Bioglass® composite coatings for orthopaedic applications. Surf. Coatings Technol. 2011; 205: 5260-5268.
• Jugowiec D, Łukaszczyk A, Cieniek Ł, Kot M, Reczyńska K, Cholewa-kowalska K, Pamuła E, Moskalewicz T. Electrophoretic deposition and characterization of composite chitosan-based coatings incorporating bioglass and sol-gel glass particles on the Ti-13Nb-13Zr alloy. Surf. Coat. Technol. 2017; 319: 33-46.
• Azzouz I, Faure J, Khlifi K, Cheikh Larbi A, Benhayoune H. Electrophoretic Deposition of 45S5 Bioglass® Coatings on the Ti6Al4V Prosthetic Alloy with Improved Mechanical Properties. Coatings. 2020; 10.
• Khanmohammadi S, Ojaghi-Ilkhchi M, Farrokhi-Rad M. Evaluation of Bioactive glass and hydroxyapatite-based nanocomposite coatings obtained by electrophoretic deposition. Ceramics International. 2020; 46: 26069-26077.
• Azzouz I, Faure J, Khlifi K, Cheikh Larbi A, Benhayoune H. Electrophoretic Deposition of 45S5 Bioglass® Coatings on the Ti6Al4V Prosthetic Alloy with Improved Mechanical Properties. Coatings. 2020; 10(12):1192.
• Uzun Y., Biçer S., Tüzemen, Ş.M., Çelik, A. Investigation of Wear Resistance of Electrophoretic Deposition onto Ti6Al4V Alloy. 3rd International Natural Science, Engineering and Materials Technology Conference, NEM 2023.Gazimagusa, Cyprus (Kktc); 2023, p. 164-172.
• Uzun Y. Electrochemıcal Evaluatıon Of Ti45Nb Coated Wıth 63s Bıoglass By Electrophoretıc Deposıtıon. Surface Revıew And Letters. 2023; 30(11).
• Bozkurt YB, Seçer Kavasoğlu Y., Atik B., Kovacı H., Uzun Y., Çelik A. Comparison study of corrosion behavior for chitosan coated Ti6Al4V alloy produced by selective laser melting and forging. Progress in Organic Coatings. 2023; 182: 107655.