Lightweight Cement-Based Composites Incorporating Hollow Glass Microspheres: Fresh and Hardened State Properties

Öz

This research aims to develop a lightweight cementitious composite with satisfied mechanical and good thermal insulating properties. Two different types of hollow glass microspheres were used as lightweight aggregates and were substituted with fine aggregate by 10, 20 and 40% by volume. The rheological, physical, mechanical and microstructural properties of the resulting HGM-incorporated composites are investigated. The results showed that physical and mechanical properties of individual HGM particles plays a dominant role on the properties of lightweight cement mortars. HGM addition provided reductions up to 20% in the density and 45% in the thermal conductivity values of mortars compared to the reference. The optimum HGM ratio is suggested as 20%, which provides benefits such as reduced density and improved thermal insulation capability without causing significant reduction in compressive strength. It was concluded that HGMs can be used in the lightweight cementitious mortar production which have great potential in building applications to reduce the heating energy consumption.

Anahtar Kelimeler

• Hollow glass microspheres
• rheology
• mechanical properties
• thermal conductivity
• microstructure

Kaynakça

1. Yasar, E., Atis, C.D., Kilic, A., Gulsen, H. Strength properties of lightweight concrete made with basaltic pumice and fly ash. Mater. Lett. 57, 2267–2270, 2003. https://doi.org/10.1016/S0167-577X(03)00146-0
2. Brooks, A.L., Zhou, H., Hanna, D., Comparative study of the mechanical and thermal properties of lightweight cementitious composites. Constr. Build. Mater., 159, 316–328, 2018 https://doi.org/10.1016/j.conbuildmat.2017.10.102
3. Kabay, N., Aköz, F., Effect of prewetting methods on some fresh and hardened properties of concrete with pumice aggregate. Cem. Concr. Compos., 34, 503–507, 2012. https://doi.org/10.1016/j.cemconcomp.2011.11.022
4. Kramar, D., Bindiganavile, V., Mechanical properties and size effects in lightweight mortars containing expanded perlite aggregate. Mater. Struct. Constr., 44, 735–748, 2011. https://doi.org/10.1617/s11527-010-9662-0
5. Lanzón, M., García-Ruiz, P.A., Lightweight cement mortars: Advantages and inconveniences of expanded perlite and its influence on fresh and hardened state and durability. Constr. Build. Mater., 22, 1798–1806, 2008. https://doi.org/10.1016/j.conbuildmat.2007.05.006
6. Lu, Z., Xu, B., Zhang, J., Zhu, Y., Sun, G., Li, Z., Preparation and characterization of expanded perlite/paraffin composite as form-stable phase change material. Sol. Energy., 108, 460–466, 2014. https://doi.org/10.1016/j.solener.2014.08.008
7. de Gennaro, R., Langella, A., D’Amore, M., Dondi, M., Colella, A., Cappelletti, P., de’ Gennaro, M., Use of zeolite-rich rocks and waste materials for the production of structural lightweight concretes. Appl Clay. Sci. 41, 61–72, 2008. https://doi.org/10.1016/j.clay.2007.09.008
8. Ke, Y., Beaucour, A.L., Ortola, S., Dumontet, H., Cabrillac, R., Influence of volume fraction and characteristics of lightweight aggregates on the mechanical properties of concrete. Constr. Build. Mater., 23, 2821-2828, 2009. https://doi.org/10.1016/j.conbuildmat.2009.02.038

9. Lotfy, A., Hossain, K.M.A., Lachemi, M., Lightweight self-consolidating concrete with expanded shale aggregates: modelling and optimization. Int. J. Concr. Struct. Mater., 9, 185–206, 2015. https://doi.org/10.1007/s40069-015-0096-5
10. Chandra, S., Berntsson, L., Lightweight aggregate concrete: science, technology, and applications, Elsevier, New York, USA, 2002.
11. Aglan, H., Shebl, S., Morsy, M., Calhoun, M., Harding, H., Ahmad, M., Strength and toughness improvement of cement binders using expandable thermoplastic microspheres. Constr. Build. Mater., 23, 2856–2861, 2009. https://doi.org/10.1016/j.conbuildmat.2009.02.031.
12. Yun, T.S., Jeong, Y.J., Han, T.S., Youm, K.S., Evaluation of thermal conductivity for thermally insulated concretes. Energy. Build., 61:125–132, 2013. https://doi.org/10.1016/j.enbuild.2013.01.043.
13. Zhang, Q., Li, V.C., Development of durable spray-applied fire-resistive Engineered Cementitious Composites (SFR-ECC). Cem. Concr. Compos., 60, 10–16, 2015. https://doi.org/10.1016/j.cemconcomp.2015.03.012.
14. Oreshkin, D., Semenov, V., Rozovskaya, T., Properties of light-weight extruded concrete with hollow glass microspheres. Procedia Eng., 153, 638–643, 2016. https://doi.org/10.1016/j.proeng.2016.08.214.
15. Huang, X., Ranade, R., Zhang, Q., Ni, W., Li, V.C., Mechanical and thermal properties of green lightweight engineered cementitious composites. Constr. Build. Mater., 48, 954–960, 2013. https://doi.org/10.1016/j.conbuildmat.2013.07.104.
16. Xu, B., Ma, H., Hu, C., Yang, S., Li, Z., Influence of curing regimes on mechanical properties of magnesium oxychloride cement-based composites. Constr. Build. Mater., 102, 613–619, 2016. https://doi.org/10.1016/j.conbuildmat.2015.10.205.
17. Hanif, A., Parthasarathy, P., Ma, H., Fan, T., Li, Z., Properties improvement of fly ash cenosphere modified cement pastes using nano silica, Cem. Concr. Compos., 81, 35–48, 2017. https://doi.org/10.1016/j.cemconcomp.2017.04.008.
18. 3MGlass Bubbles, (n.d.). https://www.3m.com/3M/en_US/company-us/all-3m-products/~/All-3M-Products/Advanced-Materials/Glass-Bubbles/?N=5002385+8710783+8711017+8745513+3294857497&rt=r3 (accessed January 4, 2020).
19. Al-Gemeel, A.N., Zhuge, Y., Youssf, O., Use of hollow glass microspheres and hybrid fibres to improve the mechanical properties of engineered cementitious composite. Constr. Build. Mater., 171, 858–870, 2018. https://doi.org/10.1016/j.conbuildmat.2018.03.172
20. Li, H., Xu, H., Xu, B., Zhong, Z., Jiang, J., Li, Z., Wang, S., Zhang, H., Lightweight glass/carbon composite hollow microspheres with intact shell and good thermal stability. Ceram. Int., 43, 10581–10584, 2017. https://doi.org/10.1016/j.ceramint.2017.04.154.
21. Ren, S., Li, X., Zhang, X., Xu, X., Dong, X., Liu, J., Du, H., Guo, A., Mechanical properties and high-temperature resistance of the hollow glass microspheres/borosilicate glass composite with different particle size. J. Alloys. Compd., 722, 321–329, 2017. https://doi.org/10.1016/j.jallcom.2017.06.092.
22. Bubnov, A.S., Khorev, V.S., Boyko, I.A., The effect of lightweight agents on the density of cement slurry applied during oil and gas well drilling. IOP Conf. Ser. Earth Environ. Sci., 24, 2015. https://doi.org/10.1088/1755-1315/24/1/012008.
23. Ichikawa, T., Miura, M., Modified model of alkali-silica reaction. Cem. Concr. Res., 37, 1291–1297, 2007. https://doi.org/10.1016/j.cemconres.2007.06.008
24. Perfilov, V.A., Oreshkin, D.V., Semenov, V.S., Environmentally safe mortar and grouting solutions with hollow glass microspheres. Procedia Eng., 150, 1479–1484, 2016. https://doi.org/10.1016/j.proeng.2016.07.086
25. Aguayo, M., Das, S., Maroli, A., Kabay, N., Mertens, J.C.E., Rajan, S.D., Sant, G., Chawla, N., Neithalath, N., The influence of microencapsulated phase change material (PCM) characteristics on the microstructure and strength of cementitious composites: Experiments and finite element simulations. Cem. Concr. Compos., 73, 29–41, 2016. https://doi.org/10.1016/j.cemconcomp.2016.06.018
26. Li, L.G., Wang, Y.M., Tan, Y.P., Kwan, A.K.H., Filler technology of adding granite dust to reduce cement content and increase strength of mortar. Powder Technol., 342, 388–396, 2019. https://doi.org/10.1016/j.powtec.2018.09.084
27. Bédérina, M., Khenfer, M.M., Dheilly, R.M., Quéneudec, M., Reuse of local sand: Effect of limestone filler proportion on the rheological and mechanical properties of different sand concretes. Cem. Concr. Res., 35, 1172–1179, 2005. https://doi.org/10.1016/j.cemconres.2004.07.006
28. Yang, E.I., Yi, S.T., Leem, Y.M., Effect of oyster shell substituted for fine aggregate on concrete characteristics: Part I. Fundamental properties. Cem. Concr. Res., 35, 2175–2182, 2005. https://doi.org/10.1016/j.cemconres.2005.03.016
29. Thomas, B.S., Damare, A., Gupta, R.C., Strength and durability characteristics of copper tailing concrete. Constr. Build. Mater., 48, 894–900, 2013. https://doi.org/10.1016/j.conbuildmat.2013.07.075
30. Vance, K., Sant, G., Neithalath, N., The rheology of cementitious suspensions: A closer look at experimental parameters and property determination using common rheological models. Cem. Concr. Compos., 59, 38–48, 2015. https://doi.org/10.1016/j.cemconcomp.2015.03.001
31. Erzengin, S.G., Kaya, K., Perçin Özkorucuklu, S., Özdemir, V., Yıldırım, G., The properties of cement systems superplasticized with methacrylic ester-based polycarboxylates. Constr. Build. Mater., 166, 96–109, 2018. https://doi.org/10.1016/j.conbuildmat.2018.01.088
32. Arora, A., Aguayo, M., Hansen, H., Castro, C., Federspiel, E., Mobasher, B., Neithalath, N., Microstructural packing- and rheology-based binder selection and characterization for Ultra-high Performance Concrete (UHPC). Cem. Concr. Res., 103, 179–190, 2018. https://doi.org/10.1016/j.cemconres.2017.10.013
33. Torres-Carrasco, M., Rodríguez-Puertas, C., Del Mar, A.M., Puertas, F., Alkali activated slag cements using waste glass as alternative activators. Rheological behaviour. Bol. La Soc. Esp. Ceram. y Vidr., 54, 45–57, 2015. https://doi.org/10.1016/j.bsecv.2015.03.004
34. Nazário, S.F., Gomes de Sousa S.R., Bombard, A.J. F., Lopes, V.S., Rheological study of cement paste with metakaolin and/or limestone filler using Mixture Design of Experiments. Constr. Build. Mater., 143, 92–103, 2017. https://doi.org/10.1016/j.conbuildmat.2017.03.001
35. Colombo, A., Geiker, M.R., Justnes, H., Lauten, K., De Weerdt, On the effect of calcium lignosulfonate on the rheology and setting time of cement paste. Cem. Concr. Res., 100, 435–444, 2017. https://doi.org/10.1016/j.cemconres.2017.06.009
36. Tan, H., Zou, F., Ma, B., Guo, Y., Li, X., Mei, J., Effect of competitive adsorption between sodium gluconate and polycarboxylate superplasticizer on rheology of cement paste. Constr. Build. Mater., 144, 338–346, 2017. https://doi.org/10.1016/j.conbuildmat.2017.03.211
37. Papo, A., Piani, L., Ricceri, R., Rheological properties of very high-strength portland cement pastes: influence of very effective superplasticizers. Int. J. Chem. Eng., 1–7, 2010. https://doi.org/10.1155/2010/682914.
38. Bentz, D.P., Ferraris, C.F., Galler, M.A., Hansen, A.S., Guynn, J.M., Influence of particle size distributions on yield stress and viscosity of cement-fly ash pastes. Cem. Concr. Res., 42, 404–409, 2012. https://doi.org/10.1016/j.cemconres.2011.11.006
39. Lee, S.H., Kim, H.J., Sakai, E., Daimon, M., Effect of particle size distribution of fly ash-cement system on the fluidity of cement pastes. Cem. Concr. Res., 33, 763–768, 2003. https://doi.org/10.1016/S0008-8846(02)01054-2
40. Roussel, N., Stefani, C., Leroy, R., From mini-cone test to Abrams cone test: Measurement of cement-based materials yield stress using slump tests. Cem. Concr. Res., 35, 817–822, 2005. https://doi.org/10.1016/j.cemconres.2004.07.032
41. Roussel, N., Coussot, P., Fifty-cent rheometer for yield stress measurements: From slump to spreading flow. J. Rheol., 49, 705–718, 2005. https://doi.org/10.1122/1.1879041
42. Roussel, N., Correlation between yield stress and slump: Comparison between numerical simulations and concrete rheometers results. Mater. Struct. Constr., 39, 501–509, 2006. https://doi.org/10.1617/s11527-005-9035-2
43. Choi, S.J., Choi, J.I., Song, J.K., Lee, B.Y., Rheological and mechanical properties of fiber-reinforced alkali-activated composite. Constr. Build. Mater., 96, 112–118, 2015. https://doi.org/10.1016/j.conbuildmat.2015.07.182
44. Zhang, W., Yao, X., Yang, T., Liu, C., Zhang, Z., Increasing mechanical strength and acid resistance of geopolymers by incorporating different siliceous materials. Constr. Build. Mater., 175, 411–421, 2018. https://doi.org/10.1016/j.conbuildmat.2018.03.195
45. Le Roy, R., Parant, E., Boulay, C., Taking into account the inclusions’ size in lightweight concrete compressive strength prediction. Cem. Concr. Res., 35, 770–775, 2005. https://doi.org/10.1016/j.cemconres.2004.06.002
46. Wang, R., Meyer, C., Performance of cement mortar made with recycled high impact polystyrene. Cem. Concr. Compos., 34, 975–981, 2012. https://doi.org/10.1016/j.cemconcomp.2012.06.014
47. Hanif, A., Diao, S., Lu, Z., Fan, T., Li, Z., Green lightweight cementitious composite incorporating aerogels and fly ash cenospheres-Mechanical and thermal insulating properties. Constr. Build. Mater., 116, 422–430, 2016. https://doi.org/1037//0033-2909.I26.1.78
48. Sengul, O., Azizi, S., Karaosmanoglu, F., Tasdemir, M.A., Effect of expanded perlite on the mechanical properties and thermal conductivity of lightweight concrete. Energy Build. 43, 671–676, 2011. https://doi.org/10.1016/j.enbuild.2010.11.008
49. Tajra, F., Abd Elrahman, M., Lehmann, C., Stephan D (2019) Properties of lightweight concrete made with core-shell structured lightweight aggregate. Constr Build Mater 205:39–51. https://doi.org/10.1016/j.conbuildmat.2019.01.194
50. Gündüz, L., Uǧur, I., The effects of different fine and coarse pumice aggregate/cement ratios on the structural concrete properties without using any admixtures. Cem. Concr. Res., 35, 1859–1864, 2005. https://doi.org/10.1016/j.cemconres.2004.08.003
51. Oktay, H., Yumrutaş, R., Akpolat, A., Mechanical and thermophysical properties of lightweight aggregate concretes. Constr. Build. Mater., 96, 217–225, 2015. https://doi.org/10.1016/j.conbuildmat.2015.08.015
52. Yu, Q.L., Spiesz, P., Brouwers, H.J.H., Development of cement-based lightweight composites – Part 1: Mix design methodology and hardened properties. Cem. Concr. Compos., 44, 17–29, 2013. https://doi.org/10.1016/j.cemconcomp.2013.03.030
53. Iman, A., Payam, S., Fitri, A.H.Z., Binti, M.N., Thermal conductivity of concrete – A review. J, Build, Eng., 20, 81–93, 2018. https://doi.org/10.1016/j.jobe.2018.07.002
54. Dixit, A., Pang, S.D., Kang, S.H., Moon, J., Lightweight structural cement composites with expanded polystyrene (EPS) for enhanced thermal insulation. Cem. Concr. Compos., 102, 185–197, 2019. https://doi.org/10.1016/j.cemconcomp.2019.04.023
55. Ali, M.R., Maslehuddin, M., Shameem, M., Barry, M.S., Thermal-resistant lightweight concrete with polyethylene beads as coarse aggregates. Constr. Build. Mater., 164, 739–749, 2018. https://doi.org/10.1016/j.conbuildmat.2018.01.012
56. Demirboǧa, R., Gül, R., The effects of expanded perlite aggregate, silica fume and fly ash on the thermal conductivity of lightweight concrete. Cem. Concr. Res., 33, 723–727, 2003. https://doi.org/10.1016/S0008-8846(02)01032-3
57. Kockal, N.U., Ozturan, T., Strength and elastic properties of structural lightweight concretes. Mater. Des., 32, 2396–2403, 2011. https://doi.org/10.1016/j.matdes.2010.12.053
58. Blanco, F., Garciéa, P., Mateos, P., Ayala, J., Characteristics and properties of lightweight concrete manufactured with cenospheres. Cem. Concr. Res., 30, 1715–1722, 2000. https://doi.org/10.1016/S0008-8846(00)00357-4
59. Babu, D.S., Ganesh Babu, K., Tiong-Huan, W., Effect of polystyrene aggregate size on strength and moisture migration characteristics of lightweight concrete. Cem. Concr. Compos., 28, 520–527, 2006. https://doi.org/10.1016/j.cemconcomp.2006.02.018.