Kompozitler için 3D Yazıcı İle Yüksek Performanslı Tekstil Yapılarının Tasarlanması ve Geliştirilmesi

Öz

Üç boyutlu 3D yazıcılar tekstil endüstrisi için çok çeşitli tasarım ve geometri seçenekleri sunmaktadır. Bu çalışmada, 3D yazıcı ile naylon ve cam elyaf takviyeli naylon bal peteği yapılar üretmek ve onları yapısal kompozitlere eğme ve basma özelliklerini geliştirmek üzere entegre etmek hedeflenmektedir. Üç noktadan eğme ve basma mekanik test sonuçları, ticari alüminyum bal peteği dolgulu sandviç kompozitlere kıyasla geliştirilen kompozitlerin oldukça önemli bir iyileştirme sağladığını göstermiştir. Özellikle, 3D yazdırılmış cam elyaf takviyeli naylon yapı dolgulu kompozitlerde basma özelliğinde elde edilen gelişme, cam elyafın kendi mukavemeti ve iyi tasarlanmış dolgu geometrisi olmak üzere iki esas faktörden kaynaklanmaktadır. 

Anahtar Kelimeler

• 3D yazıcı,havacılık,bal peteği,cam lifi,kompozit

Design and Development of 3D Printed High Performance Textile Structures for Composites

Öz

Three dimensional (3D) printers offer a variety of design and geometry options, which are substantially demanded in textile industry. In this study, the aim is to produce neat nylon and glass fiber reinforced 3D printed honeycombs and introduce them into the structural composites to enhance the overall flexural and compressive properties. A significant increase in the mechanical response is observed, both in flexural and compression modes, when compared to sandwich composites with commercial aluminum honeycombs. In particular, the increase in compressive properties of 3D printed glass fiber reinforced nylon structures is attributed to the combined effect of the two factors as the inherent strength of glass fibers and well-designed filler geometry. 

Anahtar Kelimeler

• 3D printer,aerospace,honeycomb,glass fiber,composite

Kaynakça

1. Ning, F.D. et al., (2015), Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling, Composites Part B: Engineering, Vol. 80, pp. 369-378.
2. Forged, M., Mark Forged Receives Prestigious Award for Composites Excellence (ACE), Available from: http://160.75.22.2/ docview/1615181677? accounted=11638, Oct 23, 2014
3. Adana, S. & Tam, C. A., (1997), On-machine interlocking of 3D laminate structures for composites, Composites Part B-Engineering, Vol. 28 (5), pp. 497-506
4. Champbell J. R., (2008), Inkjet4Tex: Creative implications of 3D inkjet printing technologies for textiles, Design Research Society Conference, pp. 1-12, July 16-19, Sheffield-UK.
5. Eujin, P. et al., (2015), Direct 3D printing of polymers onto textiles: experimental studies and applications, Rapid Prototyping Journal, Vol. 21 (5), pp. 556-571.
6. Xu, F. et al., (2013), Effect of Weaving Direction of Conductive Yarns on Electromagnetic Performance of 3D integrated Microstrip Antena, Applied Composite Materials, Vol. 20 (5), pp. 827-838.
7. Lubin, G and Peters, S.T., (2013), Handbook of composites, Chapman & Hall, London-UK.
8. Melnikova, R. et al., (2014), 3D printing of textile-based structures by Fused Deposition Modelling (FDM) with different polymer materials, Global Conference on Polymer and Composite Materials (PCM 2014), pp. 1-5, May 27-29, Ningbo-China.

9. Page, I. B., (2001), Polyamides as engineering thermoplastic materials, Blackwell’s, UK.
10. Tian, X, et al., (2016), Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites, Composites Part A: Applied Science and Manufacturing, Vol. 88, pp. 7-8.