Araştırma Makalesi

Farklı Eğirme Sistemleriyle Üretilmiş Bobinlerin Renk Değerlerinin Karşılaştırılması

Cilt: 24 Sayı: 107 30 Eylül 2017
PDF İndir
EN TR

Comparison of Color Values of Packages Wound From Different Spun Yarns

Öz

    In this study, effects of different yarn structures and properties, produced with ring, compact, open-end rotor and vortex spinning systems, on the color efficiency of package dyeing were investigated. For this purpose, 100% combed ring, compact, open-end and vortex yarns with different yarn counts which were used from the same raw material blend were produced and wound on perforated plastic dye tubes (cones) according to the principle of loose winding (package density; 370 g/dm3). The bobbins were dyed with reactive dye for three different dyebath concentrations in the universal package dyeing machine. CIELab (L*, a*, b*, c* and h) values, color differences (ΔE) and color strength (K/S) values of dyed yarns were measured by the spectrophotometer. In conclusion, it was determined that vortex and rotor spun yarns could have darker shades with respect to ring and compact spun yarns.   

Anahtar Kelimeler

Kaynakça

  1. Özdemir, H., (2009), Farklı İplik Üretim Sistemleri ile Eğrilmiş İpliklerin Fiziksel Özellikleri ve Bobin Boyama Performansının İncelenmesi (An Investigation of The Physical Properties and Dyeing Performance of Yarn Produced by Using Different Spinning Systems), University of Çukurova, Institute of Natural and Applied Sciences, Department of Textile Engineering, PhD Thesis, TURKEY, (in Turkish).
  2. Üreyen M. E. and Kadoğlu H., (2006), Regressional Estimation of Ring Cotton Yarn Properties from HVI Fiber Properties, Textile Research Journal, Vol. 76, Issue 5, pp. 360-366.
  3. Becerir B., Ömeroglu S., (2007), Comparison of Color Values of Plain Cotton Fabrics Knitted From Ring and Compact Spun Yarns, AATCC Review, Vol. 7, Issue 7, pp. 41-46.
  4. Micheal M. N., Dyab W. A., (2001), Effect of Spinning Method and Knitting Type on Dyeability and Fading Kinetics, AATCC Review, March, Vol. 1, Issue 3, pp. 53-56.
  5. Basal G., Oxenham W., (2006), Effect of Some Process Parameters on the Structure and Properties of Vortex Spun Yarn, Textile Research Journal, Vol. 76, Issue 6, pp. 492-499.
  6. Örtlek H. G., Şener M., and Ülkü S., (2004), Production Cost Analysis of MVS Yarns and Comparison with the Conventional Spinning Systems, Tekstil Teknoloji (International Textile Technology Magazine), Vol. 9, Issue 98, pp. 82-93.
  7. Göktepe F., Yılmaz D., Göktepe O., (2006), A Comparison of Compact Yarn Properties Produced on Different Systems, Textile Research Journal, Vol. 76, Issue 3, pp. 226-234.
  8. Çeken F., Göktepe F., (2005), Comparison of The Properties of Knitted Fibres Produced Bye Conventional and Compact Ring-Spun Yarns, Fibres & Textiles in Eastern Europe, Vol. 13, Issue 1 (49), pp. 47-50.

Ayrıntılar

Birincil Dil

Türkçe

Konular

Mühendislik

Bölüm

Araştırma Makalesi

Yazarlar

R.Tuğrul Oğulata Bu kişi benim

Yayımlanma Tarihi

30 Eylül 2017

Gönderilme Tarihi

8 Mart 2017

Kabul Tarihi

18 Eylül 2017

Yayımlandığı Sayı

Yıl 2017 Cilt: 24 Sayı: 107

Kaynak Göster

APA
Özdemir, H., & Oğulata, R. (2017). Farklı Eğirme Sistemleriyle Üretilmiş Bobinlerin Renk Değerlerinin Karşılaştırılması. Tekstil ve Mühendis, 24(107), 152-160. https://izlik.org/JA39CP78JR
AMA
1.Özdemir H, Oğulata R. Farklı Eğirme Sistemleriyle Üretilmiş Bobinlerin Renk Değerlerinin Karşılaştırılması. Tekstil ve Mühendis. 2017;24(107):152-160. https://izlik.org/JA39CP78JR
Chicago
Özdemir, Halil, ve R.Tuğrul Oğulata. 2017. “Farklı Eğirme Sistemleriyle Üretilmiş Bobinlerin Renk Değerlerinin Karşılaştırılması”. Tekstil ve Mühendis 24 (107): 152-60. https://izlik.org/JA39CP78JR.
EndNote
Özdemir H, Oğulata R (01 Eylül 2017) Farklı Eğirme Sistemleriyle Üretilmiş Bobinlerin Renk Değerlerinin Karşılaştırılması. Tekstil ve Mühendis 24 107 152–160.
IEEE
[1]H. Özdemir ve R. Oğulata, “Farklı Eğirme Sistemleriyle Üretilmiş Bobinlerin Renk Değerlerinin Karşılaştırılması”, Tekstil ve Mühendis, c. 24, sy 107, ss. 152–160, Eyl. 2017, [çevrimiçi]. Erişim adresi: https://izlik.org/JA39CP78JR
ISNAD
Özdemir, Halil - Oğulata, R.Tuğrul. “Farklı Eğirme Sistemleriyle Üretilmiş Bobinlerin Renk Değerlerinin Karşılaştırılması”. Tekstil ve Mühendis 24/107 (01 Eylül 2017): 152-160. https://izlik.org/JA39CP78JR.
JAMA
1.Özdemir H, Oğulata R. Farklı Eğirme Sistemleriyle Üretilmiş Bobinlerin Renk Değerlerinin Karşılaştırılması. Tekstil ve Mühendis. 2017;24:152–160.
MLA
Özdemir, Halil, ve R.Tuğrul Oğulata. “Farklı Eğirme Sistemleriyle Üretilmiş Bobinlerin Renk Değerlerinin Karşılaştırılması”. Tekstil ve Mühendis, c. 24, sy 107, Eylül 2017, ss. 152-60, https://izlik.org/JA39CP78JR.
Vancouver
1.Halil Özdemir, R.Tuğrul Oğulata. Farklı Eğirme Sistemleriyle Üretilmiş Bobinlerin Renk Değerlerinin Karşılaştırılması. Tekstil ve Mühendis [Internet]. 01 Eylül 2017;24(107):152-60. Erişim adresi: https://izlik.org/JA39CP78JR