Development of Textile-Based Resistive Pressure Sensing Structures for Wearable Electronic Systems

Yıl 2018, , 140 - 145, 30.06.2018

Özgür Atalay

https://doi.org/10.7216/1300759920182511009

Cited By: 3

Öz

 The aim of this research work is to develop textile-based resistive soft pressure sensing structures. In order to achieve this aim, two conductive knit fabrics are separated by non-conductive mesh fabric. Working mechanism of the sensors rely on gradual contact of the conductive fabrics through the mesh fabric thereby changing the electrical resistivity of the structure. Proposed sensors are compliant, flexible and easy to produce. The initial electrical resistance of the soft resistive sensors was measured before any applied load. It was observed that sensors were non-conductive. This indicates that sensing structures could also be utilized as flexible pressure switches. Effect of mesh size on sensitivities and working range of the sensors are also investigated. It was found that while bigger mesh size contributes the higher sensitivity, it reduces the working range of the sensor. However, this property can be utilized to adjust sensitivity and working range of the sensor for targeted applications.  

Anahtar Kelimeler

Soft sensors; textile-based sensor; pressure sensors; electronic textiles

Giyilebilir Elektronik Sistemler için Tekstil Bazlı Rezistif Basınç Algılayıcı Yapıların Geliştirilmesi

Öz

Bu çalışma tekstil yapılı rezistif yumuşak basınç sensörlerinin geliştirilmesini amaçlamaktadır. Bu amaca ulaşmak için iletken örme yapılı kumaşlar iletken olmayan gözenek yapılı kumaşla ayrılmıştır. Sensörlerin çalışma prensibi uygulanan basınca karşılık olarak iletken kumaşların gözenekler vasıtasıyla birbirine değmesi ve bunun sonucunda yapının elektriksel iletkenliğinin değişmesine dayanmaktadır. Öngürülen sensörler yumuşak yapılı, esnek ve kolay üretilebilirdir. Herhangi bir basınç uygulanmadan yapılan ölçümlerde sensörlerin elektriksel iletkenliğinin olmadığı bulunmuştur. Uygulanan basınç sonucu iletken hale gelen sensörler elektronik tekstil devrelerinde aynı zamanda anahtar olarak ta kullanılabilir. Gözenek büyüklüğünün sensörlerin hassasiyeti ve çalışma aralığına etkisi ayrıca incelenmiştir. Bunun sonucunda geniş gözenekli yapıların yüksek hassasiyet ve daha dar bir çalışma aralığı sağladığı bulunmuştur. Sensörün bu özelliği hedeflenen uygulamalar için hassasiyeti ve çalışma aralığını ayarlamaya olanak sağlar. 

Anahtar Kelimeler

Yumuşak sensörler; tekstil yapılı sensörler; basınç sensörleri; elektronik tekstiller

Kaynakça

• Ryu, S., et al., (2015), Extremely Elastic Wearable Carbon Nanotube Fiber Strain Sensor for Monitoring of Human Motion. ACS nano, 9(6): p. 5929-5936.
• Witt, J., et al., (2012), Medical Textiles With Embedded Fiber Optic Sensors for Monitoring of Respiratory Movement. Sensors Journal, IEEE, 12(1): p. 246-254.
• Coyle S, Morris D, Lau KT, Diamond D, Moyna N., (2009),Textile-based wearable sensors for assisting sports performance., Wearable and Implantable Body Sensor Networks, pp. 307-311, Jun 3, Berkeley, USA.
• Lemmens P, Crompvoets F, Brokken D, Van Den Eerenbeemd J, de Vries GJ., (2009), A body-conforming tactile jacket to enrich movie viewing, EuroHaptics Conference, Mar 18 pp. 7-12, Amsterdam, Netherland.
• Nesenbergs, K. and L. Selavo., (2015),Smart textiles for wearable sensor networks: Review and early lessons, Medical Measurements and Applications (MeMeA), 2015 IEEE International Symposium, May 7-9, Torino, Italy.
• Atalay, O. and W.R. Kennon, (2014), Knitted Strain Sensors: Impact of Design Parameters on Sensing Properties. Sensors, 14(3): p. 4712-4730.
• Zeng, W., et al., (2014), Fiber‐Based Wearable Electronics: A Review of Materials, Fabrication, Devices, and Applications. Advanced Materials, 26(31): p. 5310-5336.
• Sinclair, I., Sensors and transducers. 2000: Newnes.
• Goy, C., et al., (2015) Design, fabrication and metrological evaluation of wearable pressure sensors. Journal of medical engineering & technology, 39(3): p. 208-215.
• Lee, J., et al., (2015) Conductive Fiber‐Based Ultrasensitive Textile Pressure Sensor for Wearable Electronics. Advanced materials, 27(15): p. 2433-2439.
• Zhang, H. and X.-M. Tao., (2012), A single-layer stitched electrotextile as flexible pressure mapping sensor. Journal of The Textile Institute, 103(11): p. 1151-1159.
• Salibindla, S., et al., (2013), Characterization of a new flexible pressure sensor for body sensor networks, Intelligent Sensors, Sensor Networks and Information Processing, 2013 IEEE Eighth International Conference, April 2-5, Melbourne, Australia.
• Atalay, O., et al., (2018), A Highly Sensitive Capacitive‐Based Soft Pressure Sensor Based on a Conductive Fabric and a Microporous Dielectric Layer, Advanced Materials Technologies, 3, 1700237.
• Atalay, A., et al., (2017), Piezofilm yarn sensor-integrated knitted fabric for healthcare applications. Journal of Industrial Textiles, 47(4): p. 505-521.
• Shu, Y., et al., (2015), Surface-modified piezoresistive nanocomposite flexible pressure sensors with high sensitivity and wide linearity. Nanoscale, 7(18): p. 8636-8644.
• Kim, K.-H., et al., (2017), Wearable Resistive Pressure Sensor Based on Highly Flexible Carbon Composite Conductors with Irregular Surface Morphology. ACS Applied Materials & Interfaces, 9 (20), 17499-17507.
• Kim, K., et al., (2017), Multifunctional Woven Structure Operating as Triboelectric Energy Harvester, Capacitive Tactile Sensor Array, and Piezoresistive Strain Sensor Array. Sensors, 17(11): p. 2582.
• Langereis, G., et al., (2007), ConText: Contactless sensors for body monitoring incorporated in textiles, Portable Information Devices, PORTABLE07 IEEE International Conference, March 25-29, Orlando, Florida.
• Atalay, A., et al., (2017), Batch Fabrication of Customizable Silicone‐Textile Composite Capacitive Strain Sensors for Human Motion Tracking. Advanced Materials Technologies, 2(9), 1700136.
• Wijesiriwardana, R., et al., (2005), Capacitive fiber-meshed transducers for touch and proximity-sensing applications. Sensors Journal, IEEE, 5(5): p. 989-994.
• Takamatsu, S., et al., (2011) Flexible fabric keyboard with conductive polymer-coated fibres, Sensors 2011 IEEE, October 28-31, Limerick, Ireland.
• Hoffmann, T., B. Eilebrecht, and S. Leonhardt,, (2011), Respiratory Monitoring System on the Basis of Capacitive Textile Force Sensors. Sensors Journal, IEEE, 11(5): p. 1112-1119.
• Hasegawa, Y., et al., (2007), Novel type of fabric tactile sensor made from artificial hollow fiber, Micro Electro Mechanical Systems, MEMS. IEEE 20th International Conference, January 21-15, Hyogo, Japan
• Persano, L., et al., (2013), High performance piezoelectric devices based on aligned arrays of nanofibers of poly (vinylidenefluoride-co-trifluoroethylene). Nature communications, 4: p. 1633.
• Dunne, L.E., et al., (2005), Initial development and testing of a novel foam-based pressure sensor for wearable sensing. Journal of NeuroEngineering and Rehabilitation, 2(1): p. 4.
• Li, L.-F. and Y.-S. Ding., (2009), Design and Analysis of Parallel Woven Structure-Based Flexible Resistive Pressure Sensor, ICBBE 2009, June 11-16, Beijing, China.
• Wang, Y., et al., (2011), Novel fabric pressure sensors: design, fabrication, and characterization. Smart Materials and Structures, 20(6): p. 065015.
• Capineri, L. (2014). Resistive sensors with smart textiles for wearable technology: from fabrication processes to integration with electronics. Procedia Engineering, 87, 724-727.
• Li, J., & Xu, B. (2015). Novel highly sensitive and wearable pressure sensors from conductive three-dimensional fabric structures. Smart Materials and Structures, 24(12), 125022.