Araştırma Makalesi

Optimization of Coating Process Parameters for Color Difference After Abrasion of Denim Fabrics by Using Taguchi Method

Cilt: 26 Sayı: 116 31 Aralık 2019
Tekstil ve Mühendis Kapak
Tekstil ve Mühendis
PDF İndir
EN TR

Optimization of Coating Process Parameters for Color Difference After Abrasion of Denim Fabrics by Using Taguchi Method

Öz

The study presents an investigation on the optimizing of various coating process parameters for color difference after abrasion of denim fabrics by using Taguchi method. The parameters selected for optimization are squeeze pressure, viscosity of coating fluid, fabric passing speed, drying temperature and weft density. An L27 (35) orthogonal array was chosen as experimental plan. In the evaluations with Taguchi Method, analyses of the signal to noise ratio (S/N) and variance (ANOVA) were used. It was found that the most effective input parameter for color difference is drying temperature. Also, the satisfying combination for minimum color difference was determined as 17 picks/cm weft density, 120°C drying temperature, 30 dPa.s viscosity, 5 bar squeeze pressure, 10 m/min fabric passing speed.

Anahtar Kelimeler

Kaynakça

  1. -

Ayrıntılar

Birincil Dil

İngilizce

Konular

Mühendislik

Bölüm

Araştırma Makalesi

Yazarlar

Hüseyin Gazi Türksoy Bu kişi benim
0000-0003-4594-880X
Türkiye

Yayımlanma Tarihi

31 Aralık 2019

Gönderilme Tarihi

16 Temmuz 2019

Kabul Tarihi

15 Aralık 2019

Yayımlandığı Sayı

Yıl 2019 Cilt: 26 Sayı: 116

IZ

https://izlik.org/JA22GD56KW

Kaynak Göster

RIS / Bibtex
APA
Türksoy, H. G., Üstüntağ, S., & Avcı, M. E. (2019). Optimization of Coating Process Parameters for Color Difference After Abrasion of Denim Fabrics by Using Taguchi Method. Tekstil ve Mühendis, 26(116), 324-329. https://izlik.org/JA22GD56KW
AMA
1.Türksoy HG, Üstüntağ S, Avcı ME. Optimization of Coating Process Parameters for Color Difference After Abrasion of Denim Fabrics by Using Taguchi Method. Tekstil ve Mühendis. 2019;26(116):324-329. https://izlik.org/JA22GD56KW
Chicago
Türksoy, Hüseyin Gazi, Sümeyye Üstüntağ, ve Münevver Ertek Avcı. 2019. “Optimization of Coating Process Parameters for Color Difference After Abrasion of Denim Fabrics by Using Taguchi Method”. Tekstil ve Mühendis 26 (116): 324-29. https://izlik.org/JA22GD56KW.
EndNote
Türksoy HG, Üstüntağ S, Avcı ME (01 Aralık 2019) Optimization of Coating Process Parameters for Color Difference After Abrasion of Denim Fabrics by Using Taguchi Method. Tekstil ve Mühendis 26 116 324–329.
IEEE
[1]H. G. Türksoy, S. Üstüntağ, ve M. E. Avcı, “Optimization of Coating Process Parameters for Color Difference After Abrasion of Denim Fabrics by Using Taguchi Method”, Tekstil ve Mühendis, c. 26, sy 116, ss. 324–329, Ara. 2019, [çevrimiçi]. Erişim adresi: https://izlik.org/JA22GD56KW
ISNAD
Türksoy, Hüseyin Gazi - Üstüntağ, Sümeyye - Avcı, Münevver Ertek. “Optimization of Coating Process Parameters for Color Difference After Abrasion of Denim Fabrics by Using Taguchi Method”. Tekstil ve Mühendis 26/116 (01 Aralık 2019): 324-329. https://izlik.org/JA22GD56KW.
JAMA
1.Türksoy HG, Üstüntağ S, Avcı ME. Optimization of Coating Process Parameters for Color Difference After Abrasion of Denim Fabrics by Using Taguchi Method. Tekstil ve Mühendis. 2019;26:324–329.
MLA
Türksoy, Hüseyin Gazi, vd. “Optimization of Coating Process Parameters for Color Difference After Abrasion of Denim Fabrics by Using Taguchi Method”. Tekstil ve Mühendis, c. 26, sy 116, Aralık 2019, ss. 324-9, https://izlik.org/JA22GD56KW.
Vancouver
1.Hüseyin Gazi Türksoy, Sümeyye Üstüntağ, Münevver Ertek Avcı. Optimization of Coating Process Parameters for Color Difference After Abrasion of Denim Fabrics by Using Taguchi Method. Tekstil ve Mühendis [Internet]. 01 Aralık 2019;26(116):324-9. Erişim adresi: https://izlik.org/JA22GD56KW