Effect of Coating on the Performance Properties of Protective Gloves

Yıl 2017, Cilt: 24 Sayı: 107, 172 - 180, 30.09.2017

Mustafa Ertekin

Öz

The aim of this study is to analyze the effect of coating on the performance properties of protective gloves used for personal protective equipment. For this purpose, in the first stage ring spun para-aramid, meta-aramid and PES Trevira® yarns were produced and gloves were manufactured on a full-automatic glove knitting machine. In the second stage, gloves were dip coated with nitrile and liquid silicone and compared with their raw forms against mechanical risks such as abrasion, cut, puncture and tear. Also, the burning behaviors of the gloves were examined. As a result of the study, it has been found that coating had a major improvement on the abrasion, cut and puncture resistance of the gloves; however, coating of the gloves had a deteriorating effect on the tear resistance properties. Gloves manufactured with 59tex para-aramid yarns and coated with nitrile were found to be appropriate to use against mechanical risks and silicone coated of the same type had optimum properties for both mechanical risks and flame resistance. 

Anahtar Kelimeler

Protective gloves, aramid fibres, PES Trevira® fibres, heat and flame resistance

Kaplamanın Koruyucu Eldivenlerin Performans Özelliklerine Etkisi

Öz

Bu çalışmanın amacı, kişisel koruyucu donanımlar arasında yer alan koruyucu eldivenlerin performans özelliklerine kaplamanın etkisinin incelenmesidir. Bu amaçla ilk olarak para-aramid, meta-aramid ve PES Trevira® kesikli liflerinden iplikler üretilmiş ve üretilen ipliklerden eldiven üretimi gerçekleştirilmiştir. İkinci aşamasında ise eldivenler nitril ve sıvı silikon ile kaplanmış ve ham ile kaplanmış eldivenlerin mekanik risklere karşı dayanım (aşınma, kesme, delinme, yırtılma dayanımı) ve yanma davranışı özellikleri incelenmiştir. Çalışmanın sonucunda kaplamanın eldivenlerin aşınma, kesme, delinme dayanımlarında artışa, yırtılma dayanımında ise düşüşe neden olduğu tespit edilmiştir. 59 tex para-aramid ipliklerle üretilmiş eldivenlerin nitril kaplanmışlarının mekanik risklere karşı, silikon kaplanmışlarının ise hem mekanik risklere hem de ısı ve alev gibi termal risklere karşı koruma gerektiren alanlarda kullanılmasının avantaj sağlayacağı belirlenmiştir. 

Anahtar Kelimeler

Koruyucu eldivenler, aramid lifleri, PES Trevira® lifleri, ısı ve aleve dayanım

Kaynakça

• TMMOB Makine Mühendisleri Odası. İş Sağlığı ve Güvenliği, http://www.mmo.org.tr/resimler/dosya_ekler/a2a095df28f81a0_ek.p df?tipi=4&turu=H&sube=0, Erişim Tarihi: 06.04.2017.
• T.C. Sosyal Güvenlik Kurumu. İş Kazalarında Avrupa Birincisiyiz, http://www.sgk.gov.tr/wps/wcm/connect/adad60b4-ae07-415a- 80bd- eaf98b2df841/%C4%B0%C5%9F+kazalar%C4%B1nda+Avrupa+bi rincisiyiz.pdf?MOD=AJPERES&CACHEID=adad60b4-ae07-415a- 80bd-eaf98b2df841, Erişim Tarihi: 06.04.2017.
• T.C. Sosyal Güvenlik Kurumu. İş Kazaları İstatistikleri, www.ssk.gov.tr, Erişim Tarihi: 06.04.2017.
• Davas Aksan, A., Durusoy, R., Bal, E., Kayalar, M., Ada, S., Tanık, F. A., (2012), Risk Factors for Occupational Hand Injuries: Relationship Between Agency and Finger, American Journal of Industrial Medicine, 55, 5, 465-473.
• Dolez, P., Soulati, K., Gauvin, C., Lara, J., Vu-Khanh, T., (2012), Information Document for Selecting Gloves for Protection Against Mechanical Hazards, https://www.irsst.qc.ca/gants/en/ InfoDocu. pdf, Erişim Tarihi: 06.04.2017.
• Hearle, J.W.S., (2001), High Performance Fibers, Woodhead Publishing Ltd, Abington, England.
• Ciobanu, R., Ionesi, D., Budulan, C., (2010), Protective Gloves Against Mechanical Hazard, 7th International Conference-TEXSCI 2010, September 6-8, Liberec, Czech Republic.
• Mapa Professionnel. Koruyucu Eldivenler Kataloğu, http://www. tr.mapa-pro.com/fileadmin/user_upload/Documentation/MAPA-Professionnel_Product-catalogue_TR.pdf, Erişim Tarihi:06.04.2017.
• Satra Technology. Assessing Protective Gloves, http://www. satra.co.uk/spotlight/article_view.php?id=319, Erişim Tarihi:06.04.2017
• Irzmanska, E., Stefko, A., (2015), Simulation Method for Assessing the End of Service Life of Gloves Used by Workers Exposed to Mineral Oils and Mechanical Factors, International Journal of Industrial Ergonomics, 47, 61-71.
• Dolez, P.I., Gauvin, C., Lara, J., Vu-Khanh, T., (2010), The Effect of Protective Glove Exposure to Industrial Contaminants on Their Resistance to Mechanical Risks, International Journal of Occupational Safety and Ergonomics, 16, 2, 169–183.
• Özdemir, F., (2011), Mekanik Risklere Karşı Koruyucu Eldivenlerin Performanslarının İyileştirilmesi Üzerine Çalışmalar, Yüksek Lisans Tezi, Ege Üniversitesi, İzmir.
• Harrabi L., Dolez P. I., Vu-Khanh T., Lara J., (2006), Optimization in the Selection of Protective Gloves for Resistance to Mechanical Risks, Second International Conference of Applied Research on Textile, November 30- December 2, Monastir, Tunusia.
• Harrabi, L., Dolez, P.I., Vu-Khanh, T., Lara, J., Tremblay, G., Nadeau, S., Lariviere, C., (2008), Characterization of Protective Gloves Stiffness: Development of a Multidirectional Deformation Test Method, Safety Science, 46, 7, 1025-1036.
• Klapötke, T.M., Krumm, B., Mayr, N., Steemann, F.X., Steinhauser, G. Safety Testing of Protective Gloves, http://publik.tuwien.ac.at/files/PubDat_169519.pdf, Erişim Tarihi: 06.04.2017.
• Flambard, X., Ferreira, M., Vermeulen, B., Bourbigot, S., & Poutch, F., (2003), Mechanical and Thermal Behaviors of First Choice, Second Choice and Recycled P-Aramid Fibres, Journal of Textile and Apparel, Technology and Management, 3, 2, 1-13.
• Alpyıldız, T., Rochery, M., Kurbak, A., Flambard, X., (2011), Stab and Cut Resistance of Knitted Structures: A Comparative Study, Textile Research Journal, 81, 2, 205–214.
• Dolez, P.I., Vu-Khanh, T., (2009), Recent Developments and Needs in Materials Used for Personal Protective Equipment and Their Testing, International Journal of Occupational Safety and Ergonomics, 15, 4, 347–362.
• Elbex. General Properties of Elastomers, http://www.elbex-us.com/sites/default/files/General%20Properties%20of%20Elastome rs.pdf, Erişim Tarihi: 06.04.2017.
• DKI Rubber&Plastic Ltd. Materials, http://www.dkirubber.com/materials.asp, Erişim Tarihi: 06.04.2017.
• Standartları Enstitüsü, (2003), TS EN 388 “Koruyucu Eldivenler-Mekanik Risklere Karşı”.
• Türk Standartları Enstitüsü, (2006), TS EN ISO 15025 “Koruyucu Giyecekler–Isı ve Aleve Karşı Koruma”.
• Payot, F. Measurement and Control Method for Cutting Resistance of Protective Gloves, Performance of Protective Clothing:Fourth Volume, https://www.astm.org/DIGITAL_LIBRARY/STP/SOURCE_PAGES/STP1133.htm, Erişim Tarihi: 06.04.2017.
• Rebouillat, S. and Steffenino, B., (2005), Cut Performance Fundamentals and Norms Harmonization, Journal of ASTM International, 2, 8, 1-21.
• Difference Between. Difference Between Rubber and Silicone, http://www.differencebetween.com/difference-between-rubber-and-vs-silicone/, Erişim Tarihi: 06.04.2017.
• DuPontTM Company, The Sicence of Cut Protection, http://www2.dupont.com/Kevlar_Gloves/en_US/assets/downloads/k evlar_cut_protection_testing.pdf, Erişim Tarihi: 06.04.2017.