ŞERİT ÇIKIŞ HIZININ KARDE VE PENYE PAMUK İPLİKLERİNİN DÜZENSİZLİKLERİNE ETKİSİ

Yıl 2022, Cilt: 4 Sayı: 1, 21 - 28, 30.06.2022

Ahmet Zeybek

https://doi.org/10.55979/tjse.1116405

Öz

Bu çalışmanın amacı, beş farklı tarak şerit çıkış hızının iplik düzgünsüzlüğü CVm (%) üzerindeki etkisini belirlemektir. Bu amaçla %100 pamuk hammaddesi kullanılmış ve beş farklı tarak şeridi çıkış hızında (60 m/dk, 120 m/dk, 180 m/dk, 240 m/dk ve 300 m/dk) tarak şeridi numuneleri üretilmiştir. Karde ve penye makina hattında Ne 20/1, Ne 30/1 ve Ne 40 /1 iplik numaralarında her biri 10 adet trikove dokuma iplik türünde ring iplik makinasında toplam 600 adet numune kops üretilmiştir. Kullanılan hammaddenin ve üretilen karde şerit numunelerinin kalite özellikleri, Uster HVI 1000 ve Uster AFIS test ekipmanı kullanılarak ölçülmüştür. Ring iplik makinasında üretilen ring iplik kops numunelerinin kalite özellikleri Uster Tester 4 ve Uster Tensojet Test cihazları yardımıyla ölçülmüştür. Sonuçlar çıkarımsal ve betimsel analiz yöntemleriyle analiz edilmiştir. İstatistiksel analiz için ANOVA analiz yöntemi kullanılmımştır. Araştırma bulgularına göre hem karde hem de penye Ne 40/1 iplik numunelerinde tarak şeridi çıkış hızının artmasıyla iplik düzgünsüzlüğünde artış gözlenmiş ve bu artış istatistiksel olarak anlamlı bir fark yaratmıştır. Sonuçlar, iplik düzgünsüzlüğünün tarak şeridi çıkış hızı ile doğru orantılı olduğunu ve tarak şeridi çıkış hızının artmasının, daha yüksek düzgünsüzlük değerlerine (Cvm (%)) sahip tarak şeridi örneklerinin üretilmesine neden olduğunu ortaya koymuştur.

Anahtar Kelimeler

Tarak Şerit Çıkış Hızı, Düzgünsüzlük CVm (%), Pamuk, Tarak Makinası

THE EFFECT OF SLIVER DELIVERY SPEED ON THE UNEVENNES OF CARDED AND COMBED COTTON YARNS

Öz

The purpose of this study is to determine the effect of five different sliver delivery speeds on the yarn unevenness CVm (%). For this purpose, 100% cotton raw material was used, and card sliver samples were produced at five different card sliver delivery speeds (60 m/min, 120 m/min, 180 m/min, 240 m/min and 300 m/min). A total of 600 sample cops were produced in the ring spinning machine, each of which is 10 pieces of knitting and weaving yarn types in the carded and combed machine line, with the yarn counts Ne 20/1, Ne 30/1 and Ne 40/1 from these reed strips produced. The quality characteristics of the raw material used and the produced carded sliver samples were measured using the Uster HVI 1000 and Uster AFIS test equipment. The quality characteristics of the ring yarn cops samples produced on the ring spinning machine were measured with the help of Uster Tester 4 and Uster Tensojet Test devices. The results were analyzed by inferential and descriptive analysis methods. ANOVA analysis method was used for statistical analysis. According to the research findings, in both carded and combed Ne 40/1 yarn samples, an increase in yarn unevenness was observed with the increase in card sliver exit speed, and this increase created a statistically significant difference. The results revealed that the yarn unevenness is directly proportional to the card sliver exit speed and the increase of the card sliver exit speed causes the production of card sliver samples with higher unevenness values (Cvm (%).

Anahtar Kelimeler

Card Sliver Delivery Speed, Unevenness CVm (%), Cotton Yarns, Carding Machine

Kaynakça

• Bagwan, A. S. A. and Jadhav, K. (2016). Card setting: a factor for controlling sliver quality and yarn. Journal of Textile Science and Engineering, 6, 246.
• Chaudhari, B., Kolte, P. P., Daberao, A. M. and Mhaske, S. (2017a). Performance of card and comb sliver blended yarn. International Journal on Textile Engineering and Processes, 3(1), 30-35.
• Chaudhari, V. D., Kolte, P. P. and Chaudhari, A. D. (2017b). Effect of card delivery speed on ring yarn quality. International Journal on Textile Engineering and Process, 3(4), 13-18.
• Chaudhari, V. D., Kolte, P. P., Daberao, A. M. and Chandurkar, P. W. (2017c). Effect of licker-in speed on yarn quality. Melliand International, 23(4), 193-195.
• Çelik, P. and Kadoğlu, H. (2009). Kısa stapelli ipliklerde hammadde ve eğirme metodunun iplik tüylülüğüne etkisi. Tekstil Teknolojileri Elektronik Dergisi, 3(2), 20-28.
• El-Sayed, M. A. M., König, G., Schaller, J. and Sanad, S. H. (2012). Effect of carding machine delivery speed on production of extra-fine Egyptian cotton compact spun yarns. International Journal of Textile Science, 1, 1-4.
• Erdumlu, N. (2011). An approach to investigate the spinnability of fine count yarns on vortex spinning system. Istanbul Technical University, Institiute of Science and Technology, PhD Dissertation, İstanbul, 152 pages.
• Erdumlu, N., Özipek, B., Öztuna, A.S. and Çetinkaya, S. (2009). Investigation of vortex spun yarn properties in comparison with conventional ring and open‐end rotor spun yarns. Textile Research Journal, 79(7), 585‐595.
• Foulk, J. A. and Mcalister III, D. D. (2002). Single cotton fiber properties of low, ideal, and high micronaire values. Textile Research Journal, 72(10), 885-891.
• Jabbar, A., Hussain, T. and Moqeet, A. (2013). Impact of carding parameters and draw frame doubling on the properties of ring spun yarn. Journal of Engineered Fibers and Fabrics, 8(2). doi: 10.1177/155892501300800209.
• Kılıç, M. (2010). Karışım ipliklerinde düzgünsüzlük ve tüylülük analizleri. Dokuz Eylül University, Institute of Science and Technology, PhD Dissertation, İzmir, 270 pages.
• Leitner, H., Schwippl, H. and Baldischwieler, O. (2010). Air-jet spinning–yarns & fabrics compared to established spinning systems. In XIIth International Izmir Textile & Apparel Symposium, October, pp. 28-30.
• Mahmoudi, M. R., Lawrence, C. A., Dehghani, A. A., Greenwood, B. D. and Iype, C. (2002). The effect of fixed flats on yarn quality. Journal of the Textile Institute, 93(3), 197-209.
• Rashid, M. M., Motaleb, K. A. and Khan, A. N. (2019). Effect of flat speed of carding machine on the carded sliver and yarn quality. Journal of Engineered Fibers and Fabrics, 14. doi:1558925019845183.
• Rokonuzzaman, M., Uddin, A. J., Siddiquee, M. A. B., Al Mamun, M. A. and Asif, A. A. H. (2017). Impact of card production rate on the quality of ring yarn. International Journal of Current Engineering and Technology, 7(1), 144-147.
• Turdialiyevich, T. S. and Khabibulla, P. (2020). The influence of top flat speed of carding machine on the sliver and yarn quality. European Journal of Molecular & Clinical Medicine, 7(7), 789-797.
• Tyagi, G. K., Sharma, D. and Salhotra, K. R. (2004). Process-structure-property relationship of polyester-cotton MVS yarns: Part I-Influence of processing variables on yarn structural parameters. Indian Journal of Fibre & Textile Research, 290, 419‐428.
• Tyagi, G. K., Sharma, D. and Salhotra, K. R. (2004). Process-structure-property relationship of polyester-cotton MVS yarns: Part II-Influence of process variables on yarn characteristics. Indian Journal of Fibre & Textile Research, 290, 429‐435.
• Zou, Z., Zheng, S., Cheng, L., Xi, B. and Yao, J. (2014). Effect of some variables on the fibre packing pattern in a yarn cross-section for vortex spun yarn. Fibres & Textiles in Eastern Europe, 2(104), 40-46.