Dijital Tam Protezlerin Üretiminde Kullanılan Sistemler

Yıl 2023, , 172 - 178, 05.06.2023

Çağla Nur Gedikli , Tayfun Bilgin

https://doi.org/10.58711/turkishjdentres.vi.1265904

Öz

Diş hekimliğinde 20 yılı aşkın süredir meydana gelen gelişmeler sonucunda tam protezlerin üretiminde dijital teknolojiler kullanılmaya başlanmıştır. Dijital tam protezler klinisyenler, teknisyenler ve hastalar için birçok avantaj sunar. Zaman alan laboratuvar prosedürleri azaltılır veya ortadan kaldırılarak diş teknisyeninin tekrarlanabilir, verimli ve doğru protezler üretmesi sağlanır. Dijital protezlerin üretimi için
çeşitli sistemler mevcuttur. Bu sistemler, randevu sayısı ve her birinin sunduğu prova seçenekleri bakımından farklılık gösterir. Mevcut sistemlerin çoğu eksiltici üretim tekniğini kullanırken sadece birkaç sistem eklemeli üretim tekniğini kullanır. Bu derlemenin amacı, dijital tam protezlerin üretimi için şu anda
mevcut olan sistemler hakkında bilgi sağlamaktır.

Anahtar Kelimeler

Dijital tam protezler, CAD/CAM sistemleri, Tam protezler

Systems Used in the Fabrication of Digital Complete Dentures

Öz

As a result of the developments in dentistry for more than 20 years, digital technologies have started to be used in the manufacture of complete dentures. Digital complete dentures offer many advantages for clinicians, technicians and patients. Time-consuming laboratory procedures are reduced or eliminated allowing the dental technician to ensure reproducible, efficient, and accurate prostheses. These systems
are available for the fabrication of digital dentures. Systems differ in the number of appointments and the try-in options provided by each of them. Subtractive manufacturing is used by most existing systems, while a few manufacturers use an additive manufacturing technique. The purpose of this review
is to provide information about the systems currently available for the fabrication of digital complete dentures.

Anahtar Kelimeler

Digital complete denture, CAD/CAM systems, complete denture

Kaynakça

• 1. Villias A, Karkazis H, Yannikakis S, Theocharopoulos A, Sykaras N, Polyzois G. Current status of digital complete dentures technology. Prosthesis. 2021;3(3):229-44.
• 2. Janeva NM, Kovacevska G, Elencevski S, Panchevska S, Mijoska A, Lazarevska B. Advantages of CAD/CAM versus Conventional Complete Dentures - A Review. Open Access Maced J Med Sci. 2018;6(8):1498-502.
• 3. Wang C, Shi YF, Xie PJ, Wu JH. Accuracy of digital complete dentures: A systematic review of in vitro studies. J Prosthet Dent. 2021;125(2):249-56.
• 4. Maeda Y, Minoura M, Tsutsumi S, Okada M, Nokubi T. A CAD/CAM system for removable denture. Part I: Fabrication of complete dentures. Int J Prosthodont. 1994;7(1):17-21.
• 5. Kawahata N, Ono H, Nishi Y, Hamano T, Nagaoka E. Trial of duplication procedure for complete dentures by CAD/ CAM. J Oral Rehabil. 1997;24(7):540-8.
• 6. Busch M, Kordass B. Concept and development of a computerized positioning of prosthetic teeth for complete dentures. Int J Comput Dent. 2006;9(2):113-20.
• 7. Kanazawa M, Inokoshi M, Minakuchi S, Ohbayashi N. Trial of a CAD/CAM system for fabricating complete dentures. Dent Mater J. 2011;30(1):93-6.
• 8. Abdelnabi MH, Swelem AA. Digital technology in complete denture prosthodontics: A review of literature. Egypt Dent J. 2017;63:2871-85.
• 9. Kattadiyil MT, Jekki R, Goodacre CJ, Baba NZ. Comparison of treatment outcomes in digital and conventional complete removable dental prosthesis fabrications in a predoctoral setting. J Prosthet Dent. 2015;114(6):818-25.
• 10. Goodacre CJ, Goodacre BJ, Baba NZ. Should digital complete dentures be part of a contemporary prosthodontic education. J Prosthodont. 2021;30(S2):163-9.
• 11. Yuzbasioglu E, Us Y, Özdemir G, Albayrak B. Clinical outcomes and Complications of CAD-CAM Fabricated Complete Dentures; An update and review. Journal of Experimental and Clinical Medicine. 2021;38:92-7.
• 12. Baba NZ, Goodacre BJ, Goodacre CJ, Müller F, Wagner S. CAD/CAM complete denture systems and physical properties: A review of the literature. J Prosthodont. 2021;30(2):113-24.
• 13. Ayman AD. The residual monomer content and mechanical properties of CAD\CAM resins used in the fabrication of complete dentures as compared to heat cured resins. Electron Physician. 2017;9(7):4766-72.
• 14. Steinmassl PA, Wiedemair V, Huck C, Klaunzer F, Steinmassl O, Grunert I, et al. Do CAD/CAM dentures really release less monomer than conventional dentures. Clin Oral Investig. 2017;21(5):1697-705.
• 15. Kanakaraj S, Kumar H, Ravichandran R. An update on CAD/CAM removable complete dentures: A review on different techniques and available CAD/CAM denture systems. International Journal of Applied Dental Sciences. 2021;7(1):491-8.
• 16. Lee S, Hong SJ, Paek J, Pae A, Kwon KR, Noh K. Comparing accuracy of denture bases fabricated by injection molding, CAD/CAM milling, and rapid prototyping method. J Adv Prosthodont. 2019;11(1):55-64.
• 17. Steinmassl O, Dumfahrt H, Grunert I, Steinmassl PA. CAD/CAM produces dentures with improved fit. Clin Oral Investig. 2018;22(8):2829-35.
• 18. Tasaka A, Matsunaga S, Odaka K, Ishizaki K, Ueda T, Abe S, et al. Accuracy and retention of denture base fabricated by heat curing and additive manufacturing. J Prosthodont Res. 2019;63(1):85-9.
• 19. AlHelal A, AlRumaih HS, Kattadiyil MT, Baba NZ, Goodacre CJ. Comparison of retention between maxillary milled and conventional denture bases: A clinical study. J Prosthet Dent. 2017;117(2):233-8.
• 20. Bidra AS, Taylor TD, Agar JR. Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives. J Prosthet Dent. 2013;109(6):361-6.
• 21. Murat S, Alp G, Alatalı C, Uzun M. In vitro evaluation of adhesion of candida albicans on CAD/CAM PMMA-based polymers. J Prosthodont. 2019;28(2):873-9.
• 22. Alp G, Johnston WM, Yilmaz B. Optical properties and surface roughness of prepolymerized poly(methyl methacrylate) denture base materials. J Prosthet Dent. 2019;121(2):347-52.
• 23. Dayan C, Guven MC, Gencel B, Bural C. A Comparison of the Color Stability of Conventional and CAD/CAM Polymethyl Methacrylate Denture Base Materials. Acta Stomatol Croat. 2019;53(2):158-67.
• 24. Steinmassl O, Offermanns V, Stöckl W, Dumfahrt H, Grunert I, Steinmassl PA. In vitro analysis of the fracture resistance of CAD/CAM denture base resins. Materials (Basel). 2018;11(3).
• 25. Bilgin MS, Baytaroğlu EN, Erdem A, Dilber E. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication. Eur J Dent. 2016;10(2):286-91.
• 26. Abduo J, Lyons K, Bennamoun M. Trends in computeraided manufacturing in prosthodontics: a review of the available streams. Int J Dent. 2014;2014:783948.
• 27. Beuer F, Schweiger J, Edelhoff D. Digital dentistry: an overview of recent developments for CAD/CAM generated restorations. Br Dent J. 2008;204(9):505-11.
• 28. Alhallak K, Hagi-Pavli E, Nankali A. A review on clinical use of CAD/CAM and 3D printed dentures. Br Dent J. 2023.
• 29. Kalberer N, Mehl A, Schimmel M, Müller F, Srinivasan M. CAD-CAM milled versus rapidly prototyped (3D-printed) complete dentures: An in vitro evaluation of trueness. J Prosthet Dent. 2019;121(4):637-43.
• 30. Andreescu CF, Ghergic DL, Botoaca O, Hancu V, Banateanu AM, Patroi DN. Evaluation of different materials used for fabrication of complete digital denture. Mater Plast. 2018;55(1):124-8.
• 31. Chebib N, Kalberer N, Srinivasan M, Maniewicz S, Perneger T, Müller F. Edentulous jaw impression techniques: An in vivo comparison of trueness. J Prosthet Dent. 2019;121(4):623-30.
• 32. Lo Russo L, Caradonna G, Troiano G, Salamini A, Guida L, Ciavarella D. Three-dimensional differences between intraoral scans and conventional impressions of edentulous jaws: A clinical study. J Prosthet Dent. 2020;123(2):264-8.
• 33. Baba NZ, AlRumaih HS, Goodacre BJ, Goodacre CJ. Current techniques in CAD/CAM denture fabrication. Gen Dent. 2016;64(6):23-8.
• 34. Infante L, Yilmaz B, McGlumphy E, Finger I. Fabricating complete dentures with CAD/CAM technology. The Journal of Prosthetic Dentistry. 2014;111(5):351-5.
• 35. Baba NZ. Materials and Processes for CAD/CAM Complete Denture Fabrication. Current Oral Health Reports. 2016;3:203-8.
• 36. Steinmassl PA, Klaunzer F, Steinmassl O, Dumfahrt H, Grunert I. Evaluation of Currently Available CAD/CAM Denture Systems. Int J Prosthodont. 2017;30(2):116-22.