Finite Element Determination of Thermal Conductivity of SiAlON Ceramics Using Sem Images

Yıl 2009, Cilt: 1 Sayı: 1, 11 - 15, 15.01.2009

İbrahim Uzun Zühtü Pehlivanlı Battal Doğan

Öz

The thermal conductivity for SiAlON ceramics which are used as a cutting tool material in manufacturing industry has been investigated experimentally, theoretically, and finally numerically. In the experiments, the flash technique was used to determine the thermal conductivity by using the measured thermal diffusion coefficient data in the unsteady regime. Using Maxwell’s, serial, and parallel analytical models, the theoretical thermal conductivities have been determined.
For the numerical study, the Scanning Electron Microscope (SEM) images of the material were used. From these images,
a thermal Ansys® model has been generated through which the effective thermal conductivity was determined. Due to
the non-uniformity of the distribution of the boundary phase, different enlargement ratios of the images and as a result
finer meshes affect the calculated thermal conductivity values of the ceramics. The experimental and especially the
numerical analysis results in this study gave thermal conductivity values which agree quite well with each other.

Anahtar Kelimeler

Effective thermal conductivity, SiAlON, ceramics, SEM

Kaynakça

• [1] S.L. Casto, E.L. Vqalovo, and F. Micari, J. Mech. Working Technology, Vol. 20(1989), 35-46. [2] Y. Rong, L. Jia-Jun, L. Bao-Liang, Z. Zhen-Bi, and L. He-Zhuo Miao, Wear, Elsevier, Vol 210(1997), 39-44. [3] M.S.S. Baysal, “Effective Thermal Conductivity Coefficient of Mixed Materials Containing Cylindrical Fibers and Particles”, Doctorate Thesis,
  stanbul Tech.Üniv., (2001) [4] I. Tavman, E. Girgin, and R. Klavuz, Proceedings of the 9. Denizli Symposium on Composite Materials, (2002). [5] D. Kumlutas, and I.Tavman, J. Science and Eng., Dokuz Eylül University, Vol. 2(2003), 19-25 [6] R. Yang, and G. Chen, Physical Review B, Vol 69(2004), 195316/1-10. [7] K. Watari, K. Hirao, M. Toriyama and K. Ishizaki, “Effect of Grain Size on the Thermal Conductivity of Si3N4,” J. Am. Ceram. Soc., 82, 777-779 (1999). [8] K. Hirao, K. Watari, M. E. Brito, M. Toriyama and S. Kanzaki, “High Thermal Conductivity in Silicon Nitride with Anisotropic Microstructure,” J. Am. Ceram. Soc., 79, 2485-2488 (1996). [9] N. Hirosaki, Y. Okamoto, F. Munakata and Y. Akimune, “Effect of Seeding on the Thermal Conductivity of Self-reinforced Silicon Nitride,” J. Eur. Ceram. Soc., 19, 2183-2187 (1999). [10] S. W. Lee, H. B. Chae, D.-S. Park, Y. H. Choa, K. Niihara and B. J. Hockey, “Thermal Conductivity of nidirectionally Oriented Si3N4w/Si3N4 Composites,” J. Mater. Sci., 35 [18] 4487-4493 (2000). [11] N. Hirosaki, Y. Okamoto, M. Ando, F. Munakata and Y. Akimune, “Thermal Conductivity of Gas-pressure Sintered Silicon Nitride,” J. Am. Ceram. Soc., 79, 2978-2982 (1996). [12] H. Yokota and M. Ibukiyama, “Microstructure Tailoring for High Thermal Conductivity of C-Si3N4 Ceramics,” J. Am. Ceram. Soc., 86, 197-199 (2003). [13] N. Hirosaki, Y. Okamoto, M. Ando, F. Munakata and Y. Akimune, “Thermal Conductivity of Gas-Pressure Sintered Silicon Nitride,” J. Am. Ceram. Soc., 79, 2978-2982(1996). [14] K. Watari, K. Hirao, M. E. Brito, M. Toriyama and K. Ishizaki, “Factors to Enhance Thermal Conductivity of C-Si3N4 Ceramics,” Advances in Technology of Materials andMaterials Processing, 7, 191-202 (2005). [15] J. S. Haggerty and A. Lightfoot, “Opportunities for Enhancing the Thermal Conductivities of SiC and Si3N4 Ceramics through Improved Processing,” Ceram. Eng. Sci. Proc., 475-487 (1995). [16] K. Watari, “High Thermal Conductivity Non-Oxide Ceramics,” J.Ceram. Soc. Jpn, 109,7-16 (2001).