Nanokompozitlerin Grafen ve Grafen Oksit ile Üretimi ve Karakterizasyonunun İncelenmesi

Öz

Bu çalışmanın amacı, epoksi ve CF matrislerine G ve GO ekleyerek G/epoksi, GO/epoksi, G/CFRP, GO/CFRP nanokompozitlerini elde etmek ve bu nanokompozitlerin çekme mukavemeti üzerine G ve GO'nun etkisini araştırmaktır. Bu amaçla, polimer matrislerde G homojen olarak dağılmadığından, G hummers yöntemiyle GO'ya dönüştürülmüş ve elde edilen GO'nun karakterizasyon analizi yapılmıştır. SEM, EDX, FTIR, X-RD analiz sonuçları, GO'nun başarıyla elde edildiğini göstermiştir. Daha sonra epoksi ve CFRP'ye %0,1, %0,2 ve %0,3 oranında G ve GO eklenmiş ve G/epoksi, GO/epoksi, G/CFRP, GO/CFRP nanokompozitleri elde edilmiştir. G ve GO'nun bu nanokompozitlerin çekme mukavemeti üzerindeki etkisini karşılaştırmak için çekme testi uygulanmiştir. En iyi sonuç %0,2 oranında G ve GO ilavesi ile elde edilmiş ve GO'nun çekme mukavemeti üzerindeki etkisinin G'ye göre daha iyi olduğu gözlemlenmiştir.

Anahtar Kelimeler

• Hummers metodu
• grafen
• grafen oksit
• CFRP
• nanokompozit

PRODUCTION AND CHARACTERIZATION OF NANOCOMPOSITES WITH GRAPHENE AND GRAPHENE OXIDE

Öz

The aim of this study was to i.) obtain Graphene (G)/epoxy, Graphene Oxide (GO)/epoxy, G/carbon fiber reinforced plastic (CFRP), GO/CFRP nanocomposites by G and GO addition to epoxy and CF matrices and ii.) investigate the effect of G and GO addition on tensile strength of the nanocomposites produced. The graphene was not homogeneously distributed in polymer matrices; therefore, the G was converted into the GO using hummers method. The characterization GO was carried out by SEM, EDX, FTIR and X-RD analysis, which confirmed the successful production of the GO. The G/epoxy, GO/epoxy, G/CFRP and GO/CFRP nanocomposites were obtained by adding G and GO to epoxy and CF at a rate of 0.1, 0.2, and 0.3%. The effect of G and GO on tensile strength of the nanocomposites was determined using a tensile test. The addition of G and GO at 0.2% rate yielded the best results. The effect of GO on tensile strength was better compared to that of the G.

Anahtar Kelimeler

• Hummers Method
• Graphene
• Graphene Oxide
• CFRP
• Nanocomposite

Kaynakça

1. 1. Çelik, Y.H., Kilickap, E. and Koçyiğit, N. (2018) Evaluation of drilling performances of nano composites reinforced with graphene and graphene oxide, The International Journal of Advanced Manufacturing Technology,100,2371-2385. doi: 10.1007/s00170-018-2875-z
2. 2. Colak, Ö.U.,Bahlouli, N.,Uzunsoy, D. and Francart, C. (2020) High strain rate behavior of graphene-epoxy nanocomposites,Polymer Testing, 106219. doi: 10.1016/j.polymertesting.2019.106219
3. 3. Deshmukh, K. and Joshi, G.M. (2014) Thermo-mechanical properties of poly (vinyl chloride) /graphene oxide as high performance nanocomposites, Polymer Testing, 34,211-219. doi: 10.1016/j.polymertesting.2014.01.015
4. 4. Deshmukh, K. and Joshi, G.M. (2014) Thermo-mechanical properties of poly (vinylchloride) /graphene oxide as high performance nanocomposites, Polymer Testing, 34,211-219. doi:10.1016/j.polymertesting.2014.01.015
5. 5. Goncalves, G., Marques, P.A.A.P., Timmons, A.B., Bdkin, I., Singh, M.K., Emamic, N. and Gracio, J. (2012) Graphene oxide modified with PMMA via ATRP as a reinforcement filler, Journal of Material Chemistry, 20, 9927-9934. doi:10.1039/C0JM01674H
6. 6. Ibrahim, A., Klopocinska, A., Horvat, K. and Hamid, Z.A. (2021) Graphene-based nanocomposites: synthesis, mechanical properties, and characterizations, Polymers, 13, 2869. doi: 10.3390/polym13172869
7. 7. Kang, W., Rhee, K.Y. and Park, S. (2017) Influence of surface energetics of graphene oxide on fracture toughness of epoxy nanocomposites, Composites Part B,114, 175-183. doi: 10.1016/j.compositesb.2017.01.032
8. 8. Kausar, A., Rafique, I., Anwar, Z. and Muhammad, B. (2016) Perspectives of epoxy/graphene oxide composite: significant features and technical applications, Polymer-Plastics Technology and Engineering, 55,704-722. doi: 10.1080/03602559.2015.1098700

9. 9. Kernin, A.,Wan,K.,Liu,Y.,Shi,X.,Kong, J.,Bilotti, E.,Peijs, T. and Zhang, H.(2019) The effect of graphene network formation on the electrical, mechanical, and multifunctional properties of graphene/epoxy nanocomposites,Composites Science and Technology,169,224-231. doi:10.1016/j.compscitech.2018.10.036
10. 10. Kim, H., Kobayashi, S., Abdurrahim, M.A., Zhang, M.J., Khusainova, A., Hillmyer, M.A., Abdala, A.A. and Macosko, C.W. (2011) Graphene/polyethylene nanocomposites: Effect of polyethylene functionalization and blending methods, Polymer,52,1837-1846. doi: 10.1016/j.polymer.2011.02.017
11. 11. Kuila, T., Bose, S., Mishra, A.K., Khanra, P., Kim, N.H. and Lee, J.H. (2012) Chemical functionalization of graphene and its applications, Progress in Materials Science,57, 1061-1105. doi: 10.1016/j.pmatsci.2012.03.002
12. 12. Lalabadi, M.A.,Hashemi, H.,Feng, J. and Jafari,S.M. (2020) Carbon nanomaterials against pathogens; the antimicrobial activity of carbon nanotubes, graphene/graphene oxide, fullerenes, and their nanocomposites,Advances in Colloid and Interface Science, 284, 102250. doi:10.1016/j.cis.2020.102250
13. 13. Le, M.-T. and Huang, S.-C. (2015) Thermal and mechanical behavior of hybrid polymer nanocomposite reinforced with graphene nanoplatelets,Materials,8,5526-5536. doi: 10.3390/ma8085262
14. 14. Li, Z., Young, R.J., Wang, R., Yang, F., Hao, L., Jiao, W. and Liu, W. (2013) The role of functional groups on graphene oxide in epoxy nanocomposites, Polymer, 54, 5821-5829. doi: 10.1016/j.polymer.2013.08.026
15. 15. Li,C.,Shi, Y.,Chen, X.,He, D.,Shen, L. and Bao, N. (2018) Controlled synthesis of graphite oxide: Formation process, oxidation kinetics, and optimized conditions, Chemical Engineering Science,176,319- 328. doi:10.1016/j.ces.2017.10.028
16. 16. Mahmoud, W.E. (2011) Morphology and physical properties of poly (ethylene oxide) loaded graphene nanocomposites prepared by two different techniques, European Polymer Journal,47,1534- 1540. doi:10.1016/j.eurpolymj.2011.05.011
17. 17. Önder, M., Kayhan, E., Özkar, S. and Schneider, J.J. (2012) Palladium nanoparticles supported on chemically derived graphene: An efficient and reusable catalyst for the dehydrogenation of ammonia borane, International Journal of Hydrogen Energy,37,8161-8169. doi: 10.1016/j.ijhydene.2012.02.128
18. 18. Pan, B., Zhang, S., Li, W., Zhao, J., Liu, J., Zhang, Y. and Zhang, Y. (2012) Tribological and mechanical investigation of MC nylon reinforced by modified graphene oxide,Wear, 294-295,395-4. doi:10.3390/coatings8030091
19. 19. Park, S., He, S.,Wang, J.,Stein, A. and Macosko, C.W. (2016) Graphene-polyethylene nanocomposites:Effect of graphene functionalization, Polymer,104,1-9. doi: 10.1016/j.polymer.2016.09.058
20. 20. Rostampour, A., Sharif, M. and Mouji, N. (2016) Synergetic effects of graphene oxide and clay on the microstructure and properties of HIPS/graphene oxide/clay nanocomposites, Polymer Plastics Technology and Engineering, 56,171-183. doi: 10.1080/03602559.2016.1185626
21. 21. Sainsbury, T., Gnaniah, S., Spencer, S.J., Mignuzzi, S., Belsey, M.A., Paton, K.R. and Satti, A. (2017) Extreme mechanical reinforcement in graphene oxide based thin-film nanocomposites via covalently tailored nanofiller matrix compatibilization, Carbon, 114,367-376. doi:10.1016/j.carbon.2016.11.061
22. 22. Shah, R., Kausar, A., Muhammad, B. and Shah, S. (2015) Progression from graphene and graphene oxide to high performance polymer-based nanocomposite: A Review, Polymer-Plastics Technology and Engineering, 54,173-183. doi:10.1080/03602559.2014.955202
23. 23. Sofla, R.L.M.,Rezaei, M.,Babaie, A. and Nasiri, M. (2019) Preparation of electroactive shape memory polyurethane/graphene nanocomposites and investigation of relationship between rheology, morphology and electrical properties, Composites Part B: Engineering, 175, 107090. doi:10.1016/j.compositesb.2019.107090
24. 24. Sridharan, V., Raja, T. and Muthukrishnan, N. (2016) Study of the effect of matrix, fibre treatment and graphene on delamination by drilling jute / epoxy nanohybrid composite, Arab Journal Science Engineering, 41,1883-1894. doi:10.1007/s13369-015-2005-2
25. 25. Sun, X.,Huang, C.,Wang, L.,Liang, L.,Cheng, Y.,Fei, W. and Li, Y. (2021) Recent progress in graphene/polymer nanocomposites,Advanced Materials,33(6),2001105. doi: 10.1002/adma.202001105
26. 26. Tang, L.C., Wan, Y.J., Yan, D., Pei, Y.B., Zhao, L., Li, Y.B., Wu, L.B., Jiang, J.-X. and Lai, G.Q. (2013) The effect of graphene dispersion on the mechanical properties of graphene / epoxy composites, Carbon, 60,16 -27. doi:10.1016/j.carbon.2013.03.050
27. 27. Wang, P., Yang, J., Liu, W., Tang, X.Z., Zhao, K., Lu, X. and Xu, S. (2017) Tunable crack propagation behavior in carbon fiber reinforced plastic laminates with polydopamine and graphene oxide treated fibers, Materials and Design,113,68-75. doi: 10.1016/j.matdes.2016.10.013
28. 28. Wang, X., Yang, H., Song, L., Hu, Y., Xing, W. and Lu, H. (2016) Morphology, mechanical and thermal properties of graphene-reinforced poly(butylenesuccinate) nanocomposites, Composites Science and Technology,72,1-6. doi: 10.1016/j.compscitech.2011.05.007
29. 29. Zhang, X., Heng, Z., Shen, L., Liang, M., Zeng, Z., Chen, Y. and Zou, H. (2020) High-performance epoxy nanocomposites via constructing rigid structured interphase with epoxy-rich graphene oxide, Journal Applied of Polymer Science, 137(45), 49402. doi: 10.1002/app.49402
30. 30. Zhu, B.Y., Murali, S., Cai, W., Li, X., Suk, J.W., Potts, J.R. and Ruof, R.S. (2010) Graphene and graphene oxide: synthesis, properties, and applications, Advanced Materials, 22,3906-3924. doi:10.1002/adma.2010001068