Static Analysis of Porous Functionally Graded Cantilever Nano-Beams Via Modified Couple Stress Theory

Öz

Porosity formation is a common phenomenon in functionally graded beams due to various problems during the manufacturing process. This study uses the finite element method within the modified couple stress theory framework to investigate vertical displacements of porous functionally graded cantilever nano-beams under static loads. Power law theory is used for the material distribution of the functionally graded beams, and two models are used for the porosity distribution, namely even and uneven distribution. Within the scope of the study, the effect of porosity distribution models, porosity parameter, material length scale parameter from modified couple stress theory and power law parameter on the vertical displacements of non-porous and porous functionally graded cantilever nano-beams are presented in tables and figures. It is concluded that the material length scale parameter has an increasing effect on the stiffness of the nano-beam and that nano-beams with uneven porosity distribution behave more rigidly than those with even porosity distribution.

Anahtar Kelimeler

• Functionally graded material
• Porosity
• Nano-beam
• Modified couple stress theory
• Finite element method

DEĞİŞTİRİLMİŞ GERİLME ÇİFTİ TEORİSİ İLE GÖZENEKLİ FONKSİYONEL DERECELENDİRİLMİŞ KONSOL NANO-KİRİŞLERİN STATİK ANALİZİ

Öz

Üretim aşamasında çeşitli sorunlar sebebiyle gözenek oluşumu fonksiyonel derecelendirilmiş kirişlerde sıklıkla gözlemlenmektedir. Bu çalışmada gözenekli fonksiyonel derecelendirilmiş konsol nanokirişlerin değiştirilmiş gerilme çifti teorisi çerçevesinde sonlu elemanlar yöntemi kullanılarak statik yükler altında düşey yer değiştirmeleri incelenmiştir. Fonksiyonel derecelendirilmiş kirişlerin malzeme dağılımlarında kuvvet yasası teorisi, gözenek dağılımı içinse düzenli ve düzensiz dağılım olmak üzere iki model kullanılmıştır. Çalışma kapsamında gözeneksiz ve gözenekli fonksiyonel derecelendirilmiş konsol nano-kirişlerin düşey yer değiştirmelerinde, gözenek dağılım modellerinin, gözeneklilik parametresinin, değiştirilmiş gerilme çifti teorisinden gelen malzeme uzunluk ölçeği parametresinin ve kuvvet yasası parametresinin etkisi tablolar ve şekiller vasıtasıyla sunulmuştur. Çalışmada, malzeme uzunluk ölçeği parametresinin nano-kirişin rijitliğini arttırıcı etkisinin olduğu ve düzensiz gözenek dağılımına sahip nanokirişlerin, düzenli gözenek dağılımına sahip olanlara göre daha rijit davrandığı sonuçlarına ulaşılmıştır.

Anahtar Kelimeler

• Fonksiyonel derecelendirilmiş malzeme
• Gözeneklilik
• Nano-kiriş
• Değiştirilmiş gerilme çifti teorisi
• Sonlu elemanlar yöntemi

Kaynakça

1. Akbaş, Ş. D. (2017). Static, Vibration, and Buckling Analysis of Nanobeams. Nanomechanics. InTech. https://doi.org/10.5772/67973
2. Akbaş, Ş. D. (2018). Forced vibration analysis of functionally graded porous deep beams. Composite Structures, 186, 293-302. https://doi.org/10.1016/j.compstruct.2017.12.013
3. Akgöz, B. ve Civalek, Ö. (2011). Strain gradient elasticity and modified couple stress models for buckling analysis of axially loaded micro-scaled beams. International Journal of Engineering Science, 49(11), 1268-1280. https://doi.org/10.1016/j.ijengsci.2010.12.009
4. Akgöz, B., ve Civalek, Ö. (2012). Investigation of Size Effects on Static Response of SingleWalled Carbon Nanotubes Based on Strain Gradient Elasticity. International Journal of Computational Methods, 09(02), 1240032. https://doi.org/10.1142/S0219876212400324
5. Akgöz, B. ve Civalek, Ö. (2015). Bending analysis of FG microbeams resting on Winkler elastic foundation via strain gradient elasticity. Composite Structures, 134, 294-301. https://doi.org/10.1016/j.compstruct.2015.08.095
6. Alnujaie, A., Akbas, S. D., Eltaher, M. A. ve Assie, A. E. (2021). Damped forced vibration analysis of layered functionally graded thick beams with porosity. Smart Structures and Systems, 27(4), 679-689. https://doi.org/https://doi.org/10.12989/sss.2021.27.4.669
7. Arefi, M., ve Amabili, M. (2021). A comprehensive electro-magneto-elastic buckling and bending analyses of three-layered doubly curved nanoshell, based on nonlocal threedimensional theory. Composite Structures, 257, 113100. https://doi.org/10.1016/j.compstruct.2020.113100
8. Arefi, M., Mohammad-Rezaei Bidgoli, E., Dimitri, R., Bacciocchi, M. ve Tornabene, F. (2019). Nonlocal bending analysis of curved nanobeams reinforced by graphene nanoplatelets. Composites Part B: Engineering, 166, 1-12. https://doi.org/10.1016/j.compositesb.2018.11.092

9. Arshad, S. H., Naeem, M. N., ve Sultana, N. (2007). Frequency analysis of functionally graded material cylindrical shells with various volume fraction laws. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 221(12), 1483-1495. https://doi.org/10.1243/09544062JMES738
10. Askari, A. R. ve Tahani, M. (2015). Analytical determination of size-dependent natural frequencies of fully clamped rectangular microplates based on the modified couple stress theory. Journal of Mechanical Science and Technology, 29(5), 2135-2145. https://doi.org/10.1007/s12206-015-0435-0
11. Avcar, M. (2019). Free vibration of imperfect sigmoid and power law functionally graded beams. Steel and Composite Structures, 30(6), 603-615. https://doi.org/10.12989/scs.2019.30.6.603
12. Chen, D., Gao, K., Yang, J. ve Zhang, L. (2023). Functionally graded porous structures: Analyses, performances, and applications – A Review. Thin-Walled Structures, 191, 111046. https://doi.org/10.1016/j.tws.2023.111046
13. Civalek, Ö., Ersoy, H., Uzun, B. ve Yaylı, M. Ö. (2023). Dynamics of a FG porous microbeam with metal foam under deformable boundaries. Acta Mechanica, 234(11), 5385-5404. https://doi.org/10.1007/s00707-023-03663-7
14. Civalek, Ö., Uzun, B., ve Yaylı, M. Ö. (2020). Frequency, bending and buckling loads of nanobeams with different cross sections. Advances in Nano Research, 9(2), 91-104. https://doi.org/10.12989/anr.2020.9.2.091
15. Daghigh, H., Daghigh, V., Milani, A., Tannant, D., Lacy, T. E. ve Reddy, J. N. (2020). Nonlocal bending and buckling of agglomerated CNT-Reinforced composite nanoplates. Composites Part B: Engineering, 183, 107716. https://doi.org/10.1016/j.compositesb.2019.107716
16. Dastjerdi, S., ve Akgöz, B. (2019). On the statics of fullerene structures. International Journal of Engineering Science, 142, 125-144. https://doi.org/10.1016/j.ijengsci.2019.06.002
17. Dastjerdi, S., Malikan, M., Akgöz, B., Civalek, Ö., Wiczenbach, T. ve Eremeyev, V. A. (2022). On the deformation and frequency analyses of SARS-CoV-2 at nanoscale. International Journal of Engineering Science, 170, 103604. https://doi.org/10.1016/j.ijengsci.2021.103604
18. Demir, Ç. ve Civalek, Ö. (2017). On the analysis of microbeams. International Journal of Engineering Science, 121, 14-33. https://doi.org/10.1016/j.ijengsci.2017.08.016
19. Eltaher, M. A., Emam, S. A. ve Mahmoud, F. F. (2012). Free vibration analysis of functionally graded size-dependent nanobeams. Applied Mathematics and Computation, 218(14), 7406-7420. https://doi.org/10.1016/j.amc.2011.12.090
20. Eltaher, M. A., Khairy, A., Sadoun, A. M. ve Omar, F.-A. (2014). Static and buckling analysis of functionally graded Timoshenko nanobeams. Applied Mathematics and Computation, 229, 283-295. https://doi.org/10.1016/j.amc.2013.12.072
21. Esen, I. ve Özmen, R. (2022). Thermal vibration and buckling of magneto-electro-elastic functionally graded porous nanoplates using nonlocal strain gradient elasticity. Composite Structures, 296, 115878. https://doi.org/10.1016/j.compstruct.2022.115878
22. Fouda, N., El-Midany, T. ve Sadoun, A. M. (2017). Bending, buckling and vibration of a functionally graded porous beam using finite elements. Journal of applied and computational mechanics, 3(4), 274-282. https://doi.org/10.22055/JACM.2017.21924.1121
23. Güçlü, G., ve Artan, R. (2020). Large elastic deflections of bars based on nonlocal elasticity. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 100(4), e201900108. https://doi.org/10.1002/zamm.201900108
24. Hamed, M. A., Sadoun, A. M. ve Eltaher, M. A. (2019). Effects of porosity models on static behavior of size dependent functionally graded beam. Structural Engineering and Mechanics, An Int’l Journal, 71(1), 89-98. https://doi.org/10.12989/sem.2019.71.1.089
25. Ike, C. C. (2019). Point Collocation Method for the Analysis of Euler-Bernoulli Beam on Winkler Foundation. International Journal of Darshan Institute on Engineering Research and Emerging Technologies, 7(2), 1. https://doi.org/10.32692/IJDI-ERET/7.2.2018.1801
26. Jalaei, M. H. ve Civalek, Ӧ. (2019). On dynamic instability of magnetically embedded viscoelastic porous FG nanobeam. International Journal of Engineering Science, 143, 14-32. https://doi.org/10.1016/j.ijengsci.2019.06.013
27. Jia, X. L., Ke, L. L., Zhong, X. L., Sun, Y., Yang, J. ve Kitipornchai, S. (2018). Thermalmechanical-electrical buckling behavior of functionally graded micro-beams based on modified couple stress theory. Composite Structures, 202, 625-634. https://doi.org/10.1016/j.compstruct.2018.03.025
28. Kafkas, U., Uzun, B., Yaylı, M. Ö., ve Güçlü, G. (2023). Thermal vibration of perforated nanobeams with deformable boundary conditions via nonlocal strain gradient theory. Zeitschrift für Naturforschung A, 78(8). https://doi.org/10.1515/zna-2023-0088
29. Kafkas, U., Ünal, Y., Yaylı, M. Ö., ve Uzun, B. (2023). Buckling analysis of perforated nano/microbeams with deformable boundary conditions via nonlocal strain gradient elasticity. Advances in Nano Research, 15(4), 339-353. https://doi.org/10.12989/anr.2023.15.4.339
30. Kahya, V. ve Turan, M. (2018). Vibration and stability analysis of functionally graded sandwich beams by a multi-layer finite element. Composites Part B: Engineering, 146, 198- 212. https://doi.org/10.1016/j.compositesb.2018.04.011
31. Karamanli, A., ve Vo, T. P. (2022). Finite element model for free vibration analysis of curved zigzag nanobeams. Composite Structures, 282, 115097. https://doi.org/10.1016/J.COMPSTRUCT.2021.115097
32. Lam, D. C. C., Yang, F., Chong, A. C. M., Wang, J. ve Tong, P. (2003). Experiments and theory in strain gradient elasticity. Journal of the Mechanics and Physics of Solids, 51(8), 1477-1508. https://doi.org/10.1016/S0022-5096(03)00053-X
33. Li, Y. S. ve Pan, E. (2015). Static bending and free vibration of a functionally graded piezoelectric microplate based on the modified couple-stress theory. International Journal of Engineering Science, 97, 40-59. https://doi.org/10.1016/j.ijengsci.2015.08.009
34. Logan, D. L. (2011). A first course in the finite element method (4. bs). Thomson.
35. Ma, H., Gao, X. ve Reddy, J. (2008). A microstructure-dependent Timoshenko beam model based on a modified couple stress theory. Journal of the Mechanics and Physics of Solids, 56(12), 3379-3391. https://doi.org/10.1016/j.jmps.2008.09.007
36. Ma, H. M., Gao, X.-L. ve Reddy, J. N. (2011). A non-classical Mindlin plate model based on a modified couple stress theory. Acta Mechanica, 220(1-4), 217-235. https://doi.org/10.1007/s00707-011-0480-4
37. Mercan, K., Numanoglu, H. M., Akgöz, B., Demir, C. ve Civalek, Ö. (2017). Higher-order continuum theories for buckling response of silicon carbide nanowires (SiCNWs) on elastic matrix. Archive of Applied Mechanics, 87(11), 1797-1814. https://doi.org/10.1007/s00419- 017-1288-z
38. Mollamahmutoğlu, Ç., ve Mercan, A. (2019). A novel functional and mixed finite element analysis of functionally graded micro-beams based on modified couple stress theory. Composite Structures, 223, 110950. https://doi.org/10.1016/j.compstruct.2019.110950
39. Murmu, T., ve Pradhan, S. C. (2009). Buckling analysis of a single-walled carbon nanotube embedded in an elastic medium based on nonlocal elasticity and Timoshenko beam theory and using DQM. Physica E: Low-dimensional Systems and Nanostructures, 41(7), 1232- 1239. https://doi.org/10.1016/J.PHYSE.2009.02.004
40. Najafzadeh, M., Adeli, M. M., Zarezadeh, E. ve Hadi, A. (2020). Torsional vibration of the porous nanotube with an arbitrary cross-section based on couple stress theory under magnetic field. Mechanics Based Design of Structures and Machines. https://doi.org/10.1080/15397734.2020.1733602
41. Numanoğlu, H. M. (2021). Examination of How Size-Effect Modifies the Stiffness and Mass Matrices of Nanotrusses/Nanoframes. International Journal of Engineering and Applied Sciences, 13(4), 155-165. https://doi.org/10.24107/ijeas.1036574
42. Numanoğlu, H. M., Akgöz, B. ve Civalek, Ö. (2018). On dynamic analysis of nanorods. International Journal of Engineering Science, 130, 33-50. https://doi.org/10.1016/j.ijengsci.2018.05.001
43. Park, S. K. ve Gao, X.-L. (2006). Bernoulli–Euler beam model based on a modified couple stress theory. Journal of Micromechanics and Microengineering, 16(11), 2355-2359. https://doi.org/10.1088/0960-1317/16/11/015
44. Polat, S. C. ve Bağdatlı, S. M. (2023). Investigation of stepped microbeam vibration motions according to modified couple stress theory. Zeitschrift für Naturforschung A, 78(5), 379-393. https://doi.org/10.1515/zna-2022-0286
45. Reddy, J. N. (2007). Nonlocal theories for bending, buckling and vibration of beams. International Journal of Engineering Science, 45(2-8), 288-307. https://doi.org/10.1016/J.IJENGSCI.2007.04.004
46. Reddy, J. N. (2022). Theories and Analyses of Beams and Axisymmetric Circular Plates. Boca Raton: CRC Press. https://doi.org/10.1201/9781003240846
47. Saraçoğlu, M. H., Güçlü, G. ve Uslu, F. (2022). Deflection analysis of functionally graded equal strength beams. European Mechanical Science, 6(2), 119-128. https://doi.org/10.26701/ems.1015629
48. Soltani, M., Atoufi, F., Mohri, F., Dimitri, R. ve Tornabene, F. (2021). Nonlocal elasticity theory for lateral stability analysis of tapered thin-walled nanobeams with axially varying materials. Thin-Walled Structures, 159, 107268. https://doi.org/10.1016/j.tws.2020.107268
49. Tadi Beni, Y., Mehralian, F. ve Zeighampour, H. (2016). The modified couple stress functionally graded cylindrical thin shell formulation. Mechanics of Advanced Materials and Structures, 23(7), 791-801. https://doi.org/10.1080/15376494.2015.1029167
50. Talha, M. ve Singh, B. N. (2010). Static response and free vibration analysis of FGM plates using higher order shear deformation theory. Applied Mathematical Modelling, 34(12), 3991- 4011. https://doi.org/10.1016/j.apm.2010.03.034
51. Togun, N. ve Bağdatli, S. M. (2016). Size dependent nonlinear vibration of the tensioned nanobeam based on the modified couple stress theory. Composites Part B: Engineering, 97, 255-262. https://doi.org/10.1016/j.compositesb.2016.04.074
52. Tran, T. T. ve Le, P. B. (2023). Nonlocal dynamic response analysis of functionally graded porous L-shape nanoplates resting on elastic foundation using finite element formulation. Engineering with Computers, 39(1), 809-825. https://doi.org/10.1007/s00366-022-01679-6
53. Tsiatas, G. C. (2009). A new Kirchhoff plate model based on a modified couple stress theory. International Journal of Solids and Structures, 46(13), 2757-2764. https://doi.org/10.1016/j.ijsolstr.2009.03.004
54. Turan, M. (2022). Fonksiyonel Derecelendirilmiş Gözenekli Kirişlerin Sonlu Elemanlar Yöntemiyle Statik Analizi. Mühendislik Bilimleri ve Tasarım Dergisi, 10(4), 1362-1374. https://doi.org/10.21923/jesd.1134356
55. Turan, M., ve Kahya, V. (2018). Fonksiyonel Derecelendirilmiş Kirişlerin Serbest Titreşim Analizi. Karadeniz Fen Bilimleri Dergisi, 8(2), 119-130. https://doi.org/10.31466/kfbd.453833
56. Turan, M., ve Kahya, V. (2021). Fonksiyonel derecelendirilmiş sandviç kirişlerin Navier yöntemiyle serbest titreşim ve burkulma analizi. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 36(2), 743-758. https://doi.org/10.17341/gazimmfd.599928
57. Uzun, B., Kafkas, U., Deliktaş, B. ve Yaylı, M. Ö. (2022). Size-Dependent Vibration of Porous Bishop Nanorod with Arbitrary Boundary Conditions and Nonlocal Elasticity Effects. Journal of Vibration Engineering & Technologies. https://doi.org/10.1007/s42417-022- 00610-z
58. Uzun, B., Kafkas, U. ve Yaylı, M. Ö. (2020). Axial dynamic analysis of a Bishop nanorod with arbitrary boundary conditions. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 100(12), e202000039. https://doi.org/10.1002/ZAMM.202000039
59. Uzun, B., Kafkas, U. ve Yaylı, M. Ö. (2021). Free vibration analysis of nanotube based sensors including rotary inertia based on the Rayleigh beam and modified couple stress theories. Microsystem Technologies, 27(5), 1913-1923. https://doi.org/10.1007/s00542-020- 04961-z
60. Uzun, B. ve Yaylı, M. Ö. (2022a). Porosity dependent torsional vibrations of restrained FG nanotubes using modified couple stress theory. Materials Today Communications, 32, 103969. https://doi.org/10.1016/J.MTCOMM.2022.103969
61. Uzun, B. ve Yaylı, M. Ö. (2022b). A Finite Element Solution for Bending Analysis of a Nanoframe using Modified Couple Stress Theory. International Journal of Engineering and Applied Sciences, 14(1), 1-14. https://doi.org/10.24107/ijeas.1064690
62. Uzun, B. ve Yayli, M. Ö. (2024). Rotary inertia effect on dynamic analysis of embedded FG porous nanobeams under deformable boundary conditions with the effect of neutral axis. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(2), 111. https://doi.org/10.1007/s40430-023-04605-z
63. Wang, L. (2010). Size-dependent vibration characteristics of fluid-conveying microtubes. Journal of Fluids and Structures, 26(4), 675-684. https://doi.org/10.1016/j.jfluidstructs.2010.02.005
64. Wang, Y. Q. ve Zu, J. W. (2017). Vibration behaviors of functionally graded rectangular plates with porosities and moving in thermal environment. Aerospace Science and Technology, 69, 550-562. https://doi.org/10.1016/j.ast.2017.07.023
65. Wattanasakulpong, N. ve Ungbhakorn, V. (2014). Linear and nonlinear vibration analysis of elastically restrained ends FGM beams with porosities. Aerospace Science and Technology, 32(1), 111-120. https://doi.org/10.1016/j.ast.2013.12.002
66. Xia, W., Wang, L. ve Yin, L. (2010). Nonlinear non-classical microscale beams: Static bending, postbuckling and free vibration. International Journal of Engineering Science, 48(12), 2044-2053. https://doi.org/10.1016/j.ijengsci.2010.04.010
67. Yang, F., Chong, A. C. M., Lam, D. C. C. ve Tong, P. (2002). Couple stress based strain gradient theory for elasticity. International Journal of Solids and Structures, 39(10), 2731- 2743. https://doi.org/10.1016/S0020-7683(02)00152-X
68. Yayli, M. Ö. (2018). Torsional vibrations of restrained nanotubes using modified couple stress theory. Microsystem Technologies, 24(8), 3425-3435. https://doi.org/10.1007/s00542- 018-3735-3
69. Yayli, M. Ö. (2019). Stability analysis of a rotationally restrained microbar embedded in an elastic matrix using strain gradient elasticity. Curved and Layered Structures, 6(1), 1-10. https://doi.org/10.1515/cls-2019-0001
70. Zahedinejad, P., Zhang, C., Zhang, H., ve Ju, S. (2020). A Comprehensive Review on Vibration Analysis of Functionally Graded Beams. International Journal of Structural Stability and Dynamics, 20(04), 2030002. https://doi.org/10.1142/S0219455420300025
71. Zghal, S., Ataoui, D. ve Dammak, F. (2022). Static bending analysis of beams made of functionally graded porous materials. Mechanics Based Design of Structures and Machines, 50(3), 1012-1029. https://doi.org/10.1080/15397734.2020.1748053