Araştırma Makalesi

GIDA ENDÜSTRİSİ PROSES ATIKLARININ KOMPOSTLANMASINDA FARKLI KATKI MADDELERİ VE AŞI KULLANIMI

Cilt: 21 Sayı: 2 16 Aralık 2016
PDF İndir
EN TR

Use of Different Bulking Agents and Inoculation Agent in Composting of Food Industry Process Wastes

Öz

The aim of this study was to investigate the compostability of food industry process wastes with different bulking agents for disposal and recovery, and to determine the effect of treatment sludge which was used as inoculation agent. Sunflower stalk and corn cob were mixed to process wastes as bulking agents. Four different compost mixtures were prepared to investigate composting of process wastes. Process wastes and sunflower stalk to first mixture (M1) at ratio of 3:2; process wastes, treatment sludge and sunflower stalk to second mixture (M2) at ratio of 3:1:2; process wastes, treatment sludge and corn cob to third mixture (M3) at ratio of 3:1:2; process wastes, treatment sludge and corn cob to fourth mixture (M4) at ratio of 3:1:3 were added. M1 mixture was prepared without inoculation agent as control mixture.  Temperature, dry matter content, organic matter loss, C/N ratio, pH and electrical conductivity parameters were monitored during the composting process for 28 days. The highest organic matter losses and the highest temperature formed in the process were monitored in M3 reactor. According to the results, for the efficiently composting process; process wastes with treatment sludge as inoculation agent and corn cob as bulking agent at ratio of 3:1:2 were determined.

Anahtar Kelimeler

Kaynakça

  1. Adhikari, B. K., Barrington, S., Martinez, J. and King, S. (2009) Effectiveness of three bulking agents for food waste composting, Waste Management, 29, 197–203. doi: 10.1016/j.wasman.2008.04.001
  2. Al-jabi, L. F., Halalsheh, M. M. and Badarneh, D. M. (2008) Conservation of ammonia during food waste composting, Environmental Technology, 29, 1067–1073. doi:10.1080/09593330802175872
  3. APHA, AWWA, WPCF, (1998). Standart Methods for the Examination of Water and Wastewater, Copyright by American Public Health Association, 20th edition, Baltimore, USA, 1269.
  4. Barrington, S., Choinière, D., Trigui, M., Knight, W. (2002) Effect of carbon source on compost nitrogen and carbon losses, Bioresource Technology, 83, 189–194. doi:10.1016/S0960-8524(01)00229-2
  5. Bremner, J. M. and Mulvaney, C. S. (1982) Nitrogen-total in Methods of Soil Analysis, Part 2. Chemical and Microbiological Properties (ed A.L. Page), SSSA Book Series No 9, Soil Science Society of America and American Society of Agronomy, Madison, WI., 595-622.
  6. Cao, W., Xu, H., Zhang, H. (2013) Architecture and functional groups of biofilms during composting with and without inoculation, Process Biochemistry, 48, 1222–1226. doi:10.1016/j.procbio.2013.06.015
  7. Cheung, H. N. B., Huang, G. H., Yu, H. (2010) Microbial-growth inhibition during composting of food waste: effects of organic acids, Bioresource Technology, 101, 5925–5934. doi:10.1016/j.biortech.2010.02.062
  8. Chang, J. I., Chen, Y. J. (2010) Effects of bulking agents on food waste composting, Bioresource Technology, 101, 5917–5924. doi:10.1016/j.biortech.2010.02.042

Ayrıntılar

Birincil Dil

Türkçe

Konular

Mühendislik

Bölüm

Araştırma Makalesi

Yazarlar

Behice Gamze Gümrah Bu kişi benim

Yayımlanma Tarihi

16 Aralık 2016

Gönderilme Tarihi

25 Temmuz 2016

Kabul Tarihi

5 Ekim 2016

Yayımlandığı Sayı

Yıl 2016 Cilt: 21 Sayı: 2

Kaynak Göster

APA
Uçaroğlu, S., & Gümrah, B. G. (2016). GIDA ENDÜSTRİSİ PROSES ATIKLARININ KOMPOSTLANMASINDA FARKLI KATKI MADDELERİ VE AŞI KULLANIMI. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 21(2), 403-414. https://doi.org/10.17482/uumfd.278146
AMA
1.Uçaroğlu S, Gümrah BG. GIDA ENDÜSTRİSİ PROSES ATIKLARININ KOMPOSTLANMASINDA FARKLI KATKI MADDELERİ VE AŞI KULLANIMI. UUJFE. 2016;21(2):403-414. doi:10.17482/uumfd.278146
Chicago
Uçaroğlu, Selnur, ve Behice Gamze Gümrah. 2016. “GIDA ENDÜSTRİSİ PROSES ATIKLARININ KOMPOSTLANMASINDA FARKLI KATKI MADDELERİ VE AŞI KULLANIMI”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 21 (2): 403-14. https://doi.org/10.17482/uumfd.278146.
EndNote
Uçaroğlu S, Gümrah BG (01 Kasım 2016) GIDA ENDÜSTRİSİ PROSES ATIKLARININ KOMPOSTLANMASINDA FARKLI KATKI MADDELERİ VE AŞI KULLANIMI. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 21 2 403–414.
IEEE
[1]S. Uçaroğlu ve B. G. Gümrah, “GIDA ENDÜSTRİSİ PROSES ATIKLARININ KOMPOSTLANMASINDA FARKLI KATKI MADDELERİ VE AŞI KULLANIMI”, UUJFE, c. 21, sy 2, ss. 403–414, Kas. 2016, doi: 10.17482/uumfd.278146.
ISNAD
Uçaroğlu, Selnur - Gümrah, Behice Gamze. “GIDA ENDÜSTRİSİ PROSES ATIKLARININ KOMPOSTLANMASINDA FARKLI KATKI MADDELERİ VE AŞI KULLANIMI”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 21/2 (01 Kasım 2016): 403-414. https://doi.org/10.17482/uumfd.278146.
JAMA
1.Uçaroğlu S, Gümrah BG. GIDA ENDÜSTRİSİ PROSES ATIKLARININ KOMPOSTLANMASINDA FARKLI KATKI MADDELERİ VE AŞI KULLANIMI. UUJFE. 2016;21:403–414.
MLA
Uçaroğlu, Selnur, ve Behice Gamze Gümrah. “GIDA ENDÜSTRİSİ PROSES ATIKLARININ KOMPOSTLANMASINDA FARKLI KATKI MADDELERİ VE AŞI KULLANIMI”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, c. 21, sy 2, Kasım 2016, ss. 403-14, doi:10.17482/uumfd.278146.
Vancouver
1.Selnur Uçaroğlu, Behice Gamze Gümrah. GIDA ENDÜSTRİSİ PROSES ATIKLARININ KOMPOSTLANMASINDA FARKLI KATKI MADDELERİ VE AŞI KULLANIMI. UUJFE. 01 Kasım 2016;21(2):403-14. doi:10.17482/uumfd.278146

DUYURU:

30.03.2021- Nisan 2021 (26/1) sayımızdan itibaren TR-Dizin yeni kuralları gereği, dergimizde basılacak makalelerde, ilk gönderim aşamasında Telif Hakkı Formu yanısıra, Çıkar Çatışması Bildirim Formu ve Yazar Katkısı Bildirim Formu da tüm yazarlarca imzalanarak gönderilmelidir. Yayınlanacak makalelerde de makale metni içinde "Çıkar Çatışması" ve "Yazar Katkısı" bölümleri yer alacaktır. İlk gönderim aşamasında doldurulması gereken yeni formlara "Yazım Kuralları" ve "Makale Gönderim Süreci" sayfalarımızdan ulaşılabilir. (Değerlendirme süreci bu tarihten önce tamamlanıp basımı bekleyen makalelerin yanısıra değerlendirme süreci devam eden makaleler için, yazarlar tarafından ilgili formlar doldurularak sisteme yüklenmelidir).  Makale şablonları da, bu değişiklik doğrultusunda güncellenmiştir. Tüm yazarlarımıza önemle duyurulur.

Bursa Uludağ Üniversitesi, Mühendislik Fakültesi Dekanlığı, Görükle Kampüsü, Nilüfer, 16059 Bursa. Tel: (224) 294 1907, Faks: (224) 294 1903, e-posta: mmfd@uludag.edu.tr