MİNYATÜR ZIMBA TESTİ İLE ISI TESİRİ ALTINDA KALAN BÖLGENİN SÜRÜNME ÖZELLİKLERİNİN BELİRLENMESİ

Öz

Bu çalışmada bir minyatür mekanik test tekniği olan Small Punch Test yönteminin kullanım alanı,  prensipleri tanıtılmış ve bu test tekniği kullanılarak standart tek eksenli sürünme testiyle numune çıkarılamayacak kadar dar olan P91 çeliğinin ısı tesiri altında kalan bölgesinin ince ve kaba taneli kısımlarının sürünme davranışları belirlenmiştir. Buna göre aynı yükleme şartları altında ince taneli yapının kaba taneli yapı ve esas metale göre daha düşük sürünme özelliklerine sahip olduğu görülmektedir.

Anahtar Kelimeler

• Minyatür zımba testi; sürünme; P91 çeliği; ısı tesiri altında kalan bölge

Determination of the Creep Properties of the Heat Affected Zone by the Small Punch Miniaturized Testing Technique

Öz

In this studythe application areas and principles of the Small punch test which is a miniaturized testing technique is described and the creep behaviour of the individual zones of the Heat Affected Zoneof a P91 steel is determined which is not possible by standard uniaxial creep tests due to the insufficient material for sampling. The distinct creep properties were distinguished viz. fine grained part of the Heat Affected Zone showing inferior creep strength compared to the coarse grained Heat Affected Zone and base metal.

Anahtar Kelimeler

• Small Punch Test; creep; P91 steel; heat affected zone

Kaynakça

1. Baik J.M., Kameda J., Buck O. (1986) Development of small punch tests for ductile-brittle transition temperature measurements of temper embrittled NiCr steels, The use of Small Scale Specimens for Testing Irradiated Materials, ASTM STP 888, W.R.Corwin and G.E.Lucas, Eds., 92-111. doi: 10.1520/STP32997S
2. Bicego V., Hurst R., Di Persio F., Stratford G.C. (2005) Comparability of Results via the Miniaturised Small Punch Creep Test Method and Traditional Uniaxial Creep Testing, 11th International Conference on Fracture, Turin-Italy.
3. Chakrabarty J. (1970) A theory of strech forming over hemispherical punch heads, International Journal of Mechanical Sciences, 12, 315-325. doi:10.1016/0020-7403(70)90085-8
4. Dobes F., Milicka K. (2002) On the Monkman-Grant relation for small punch test data, Materials Science and Engineering A, 336, 245-248. doi:10.1016/S0921-5093(01)01975-X
5. Kameda J., Buck O. (1986) Evaluation of the ductile to brittle transition temperature shift due to Temper Embrittlement and neutron irradiation by means of small punch test, Materials Science and Engineering, 83, 29-38. doi:10.1016/0025-5416(86)90171-0
6. Kander, L., Mikulas, D. (2010) Evaluation of Mechanical properties of composite coatings using small punch test method, Metallurgical Journal, LXIII 110-114.
7. Kato,T., Komazaki, S.,Kohno, Y., Tanigawa, H., Kohyama, A. (2009) High-temperature strength analysis of welded joint of RAFs by small punch test, Journal of Nuclear Materials, 386–388, 520–524. doi:10.1016/j.jnucmat.2008.12.153
8. Maile K. ve diğ. (1998) COPERNICUS – SP Test Method Assessment for the Determination of the Residual Creep Life of Service Exposed Components, Final report, EU Project ERB CIPA CT94 0103.

9. Misawa T., Adachi T., Saito M., Hamaguchi Y. (1987) Small punch test for evaluating ductile-brittle transition behaviour of irradiated ferritic steels, Journal of Nuclear Materials, 150, 194-202. doi:10.1016/0022-3115(87)90075-4
10. Small Punch Test Method for Metallic Materials. (2006), Cen Workhop Agreement, CWA 15627.
11. Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants. (2008), ASTM F2183 – 02. doi: 10.1520/F2977
12. Sturm, R., Li, Y. (2006) Small-punch testing of a weld’s heat affected zone., MTAEC9, 40(2)49