TENCEL VE PAMUK KARIŞIMLI İPLİKLERİN PERFORMANS ÖZELLİKLERİNİN İNCELENMESİ

Öz

Bu çalışmada farklı oranlarda üretilen tencel pamuk karışımı ipliklerin performans özelliklerinin incelenmesi amaçlanmıştır. Bu amaçla beş farklı karışım oranında (%25-%75, %50-%50, %75-%25 tencel-pamuk, %100 tencel ve % 100 penye pamuk) aynı büküm ve doğrusal yoğunluğa sahip iplikler aynı üretim hattında üretilmişlerdir. Üretilen ipliklerin mukavemet özellikleri (kopma kuvveti, kopma mukavemeti, kopma uzaması, kopma işi), düzgünsüzlük, tüylülük, ince-kalın yer, büküm canlılığı ve bobin sertliği değerleri standartlara uygun bir şekilde ölçülmüştür. Çalışma sonucunda karışımdaki tencel lif oranının ipliklerin mukavemet özelliklerine ve düzgünsüzlük özelliklerine etkisinin istatiksel olarak anlamlı olduğu ve karışımdaki tencel oranı arttıkça ipliklerin kopma yükü, kopma uzaması, kopma mukavemeti, kopma işi değerlerinin arttığı; % Um, % Cvm, ince-kalın yer sayısının ve neps değerlerinin ise azaldığı görülmüştür. 

Anahtar Kelimeler

• Tencel,Lyocell,Pamuk,İplik,Mukavemet

The Investigation of Performance Properties of Tencel Cotton Blended Yarn

Öz

This study aims to investigate the performance properties of the tencel/cotton blended yarns produced different blend ratios. For this purpose the yarns have been produced with five different blend ratios (25 % - 75 %,  50 % - 50 %, 75 % - 25%  tencel/cotton, 100 % tencel and 100 % combed cotton ) at the same production line. The tenacity properties (breaking load, breaking tenacity, breaking elongation, work of rupture), unevennes, hairiness, thin and thick places, twist liveliness and package hardnes values have been tested according to the standarts. The results obtained have been assessed by means of SPSS statistical analysis program and variation analysis, and Student–Newman–Keuls tests were carried out at 5% (0.05) level of significance. The results of this study indicate that the effects of blending ratio of tencel fibre on tensile properties and unevenness values of the yarns are statistically significant and it is seen that the tenacity values (breaking load, breaking tenacity, breaking elongation, work of rupture) are increased and % Um, % Cvm, thin and thick places, neps values  are decreased with the increase of tencel fibre ratio in the blend.  

Anahtar Kelimeler

• Tencel,Lyocell,Cotton,Yarn,Tenacity,Blend ratio

Kaynakça

1. Anonim, (2007). Kringel Factor Meter Instruction Manual Book Keisokki Kogyo Co.,LTD,507-70011, p.1-2.
2. Alp, E. (2010). Tencel kumaşlarda farklı parametrelerde dikiş büzgülerinin incelenmesi, Yüksek Lisans Tezi, Marmara Üniversitesi Fen Bilimleri Enstitüsü.
3. Anonim, 2007. TextTest Instruments L5700 Durometer, p. 1-6.
4. Anonim. (1993) Deltamoist (Model 345) Operator’s Guide. James H.Heal& Co.Ltd, Publication M0028A, p. 1-15.
5. Badr, A. et al. (2014). Comfort and protection properties of tencel/cotton blends. Beltwide Cotton Conferences, New Orleans, LA, January 6-8.
6. Bilir, T. (2016). İplik kompozisyonundaki tencel oranının iplik ve kumaş özelliklerine etkilerinin incelenmesi. Yüksek lisans tezi, UÜ Fen Bilimleri Enstitüsü, Tekstil Mühendisliği Anabilim Dalı, Bursa.
7. Dayıoğlu, H. ve Karakaş, H. (2007). Elyaf bilgisi. s. 113-116.
8. Debbie, J. X. Y. ( 2003 ). Tensile drawing behavior of rotor spun yarn. Thesis. The Hong Kong Polytechnic University. http://hdl.handle.net/10397/4132 Farooq, U. (2009). The Study of Structural porosity of melt blown Lyocell fibres www.umt.edu.pk/ictc2009/Presentation/ictc2009.PPT, University of Management and Technology, Lahore

9. Grineviciute, D. et al. (2011). Hand evaluation of clothing fabrics from new biodegradable fibres. Hand evaluation of clothing fabrics, International Journal of Clothing Science and Technology, Vol. 24 Iss 4 pp. 201-210. http://dx.doi.org/10.1108/09556221211232801
10. Haemmerle, F. M. (2015) Product improvements by blending cotton with tencel. Experience TENCEL® goes Bursa. Presentation ( http: // experiencetencel-bursa .lenzing .com /fileadmin / template / pdf /2_franz_haemmerle.pdf) (24.07.2016)
11. ISO 2060, (2013). Textiles -- Yarn from packages -- Determination of linear density (mass per unit length) by the skein method, International Standard Organization.
12. ISO 2061, (2015). Textiles -- Determination of twist in yarns -- Direct counting method, International Standard Organization.
13. Kaimouz, A. W. et al (2010). The inkjet printing process for lyocell and cotton fibres. part 1: the significance of pre-treatment chemicals and their relationship with colour strength, absorbed dye fixation and ink penetration. Dyes and Pigments, 84:79–87. http://doi.org/10.1016/j.dyepig.2009.06.015
14. Kasahara, K., ve diğ. (2001). Modification of tencel with treatment of ferric sodium tartrate complex solution I. Effect of treatment condition. Cellulose, Volume 8, Issue 1, pp 23–28 doi: 10.1023/A:1016637307450
15. Kılıç, M. ve Okur, A. (2011). The properties of cotton-tencel and cotton-promodal blended yarns spun in different spinning systems. Textile Research Journal,81(2): 156–172. doi: 10.1177/0040517510377828
16. Kılıç, M., ve Okur, A. ( 2014 ). Comparison of the results of different hairiness testers for cotton-tencel blended ring, compact and vortex yarns. Indian Journal of Fibre & Textile Research, 39: 49-54. http://hdl.handle.net/123456789/27366
17. Leimer, S., et al. (1997). Effects of laundering and exposure to light on environmentally-improved fabrics. Journal of Testing and Evaluation (JTEVA), 25(5): 497-502. https://doi.org/10.1520/JTE11360J
18. Lou, C-W. et al. (2008). Properties evaluation of tencel/cotton nonwoven fabric coated with chitosan for wound dressing. Textile Research Journal, 78(3): 248-254. doi: 10.1177/0040517507089747
19. Mak, C. M. et al.( 2005 ). Changes in surface morphology of tencel fabric during the fibrillation process. The Journal of The Textile Institute, 97(3): 241-246. http://dx.doi.org/10.1533/joti.2005.0216
20. Mak, C. M. et al. (2006). Objective evaluation of the Tencel fabric after fibrillation. The Journal of The Textile Institute, 97(3): 223–229. http://dx.doi.org/10.1533/joti.2005.0192
21. Männer, J. et al. (2011). Tencel® - newcellulose fıbers for carpets. Lenzinger Berichte, 89: 60-71.
22. Nostro, P. L., et al. (2003). Surface treatments on tencel fabric: grafting with β-Cyclodextrin. Journal of Applied Polymer Science, 88: 706–715. doi: 10.1002/app.11676
23. Onur, N. ve Çitoğlu, F (2010). Tencel kumaşlarda dikiş parametrelerinin dikiş mukavemetine etkilerinin incelenmesi. Tekstil ve Konfeksiyon, 4/2010 s: 359-365.
24. Owen, G. (2012). Innovation in the man-made fibres industry: corporate strategy and national institutions. Chapter 9 Innovation in fibres: the carbon fibre and Tencel stories. prepared for seminar at SPRU. https: //www.sussex.ac.uk/ webteam/ gateway/file.php?name=innovation-in-the-man-made-fibres-industry---corporate-strategy-and-national-institutions.pdf&site=25 (20.06.2016)
25. Periyasamy, A. P. (2012). Effect of alkali pretreatment and dyeing on fibrillation properties of lyocell fiber. RMUTP International Conference: Textiles & Fashion. Bangkok Thailand
26. Singha, K. (2012). Importance of the phase diagram in lyocell fiber spinning. International Journal of Materials Engineering, 2(3): 10-16. doi: 10.5923/j.ijme.20120203.01
27. Syed, U. ( 2010). The influence of woven fabric structures on the continuous dyeing of lyocell fabrics with reactive dyes. Doctorate thesis. Heriot-Watt UniversitySchool of Textiles and Design Scottish Border Campus Galashiels. http:// uk.sitestat .com/bl /ethos /s?clickout.ethos. Heriot Watt University. 547656 & amp;ns_type=clickout & bl_ethosid=547656&ns_url=http://hdl.handle.net/10399/2386. (25.06.2016)
28. Şardağ, S. (2008). İpliklerde vakumlu buharlama işlemleri ve iplik özelliklerine etkileri üzerine bir araştırma. Doktora Tezi, UÜ Fen Bilimleri Enstitüsü, Tekstil Mühendisliği Anabilim Dalı, Bursa.
29. Tyagi, G. K. et al. (2013). Physical characteristics of tencel-polyester and tencel-cotton yarns produced on ring, rotor and air-jet spinning machines. Indian Journal of Fibres & Textile Research, 38: 230-236. http://hdl.handle.net/123456789/21419
30. Tyagi, G. K. ve diğ. ( 2013). Influence of twist and blend ratio on characteristics of ring-spun tencel blended yarns. Indian Journal of Fibres & Textile Research, 38: 138-143. http://hdl.handle.net/123456789/19256
31. Udomkichdecha, W. and Chiarakorn, S. (2001). Factors to predict the fibrillation tendency of lyocell fibers. J. Sci. Res. Chula. Univ. Vol. 26, No. 1: 49-56.
32. Umur, Y. (2010).Selülozik esaslı liflerde fibrilleşmenin kopma yükü ve uzama oranı üzerine etkisi. Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 15(1): 121-133.
33. Yıldırım, H. B. (2005). Tencel kumaşların tutum özelliklerinin dikiş büzgüleri oluşumu açısından incelenmesi. Yüksek Lisans Tezi. Marmara Üniversitesi. Fen Bilimleri Enstitüsü.