HİDROLİK SİSTEMLERDEKİ ENERJİ VERİMLİLİĞİ

Öz

Bu çalışmada, keyfi başlangıç fonksiyonuna sahip hafifçe eğri bir kirişin lineer olmayan titreşimleri ele alınmaktadır. Her iki ucundan elastik mesnetler kullanılarak kiriş, boyuna yönünde kısıtlanmıştır. Başlangıçta sinüsoidal eğrilik fonksiyonuna sahip olduğu varsayılan kiriş için, ulaşılan eğrilik yüksekliğinin izdüşüme oranı 1/10 alınmaktadır. Euler-Bernoulli tipinde olan kiriş Winkler elastik zemini üzerine oturmakta ve üzerinde keyfi olarak yerleştirilmiş kütleler taşımaktadır. Hamilton prensibi kullanılarak hareket denklemleri elde edilmiştir. Zeminden ve kiriş uzamasından dolayı matematiksel modelde kübik ve quadratik lineer olmayan terimler ortaya çıkmaktadır. Hareket denklemlerini analitik olarak çözümlemek için bir Pertürbasyon tekniği olan Çok Ölçekli Metod(MMS) kullanılmaktadır. Geçici-durum titreşimleri süresince baskın rezonans durumu dikkate alınmaktadır. Mesnetlerin tipleri, kütlelerin konumları ve zeminin lineer bileşeni gibi farklı mukayese parametreleri için doğal frekanslar elde edilmektedir. Genlik-faz modülasyon denklemleri kullanılarak frekans-genlik ve frekans-cevap grafikleri çizilmiştir.

 

Anahtar Kelimeler

• Hidrolik devre,Hidrolik motor,Elektro-hidrolik hareketlendirici,Basınç dengeli Hidrolik sistem

Energy Efficiency in Hydraulic Systems

Öz

The development of hydraulic systems and the reduction of energy losses have provided by very serious scientific studies related to these systems recently. Energy losses consist of friction in pipes, equipment, elbows and diameter changes. The hydraulic pressure losses that cause the heat increase will require the use of a cooler, as it will damage the system. Another energy loss is due to fluid leakages, which are initially small but increase over time. In addition, the fluid returning to the tank through the safety valve also increases the energy loss. Equipment and technological improvements, in hydraulic systems, reduce the energy losses. In order to facilitate the pressure control in the system, the high-pressurized liquid discharge in return line, passed through the safety valve installed into the closest to the pump is increased. The role of the hydraulic system in industrial development is increasingly taking the place of digital control systems, which is a much more economical alternative. In this study, conventional and energy efficient systems are compared with valve and pump-controlled mobile devices.

Anahtar Kelimeler

• Hydraulic circuit,Hydraulic motor,Electro-hydraulic actuator,Pressure compensated Hydraulic system

Kaynakça

1. Achten, P., Fu, Z. ve Vael, G. (1997) Transforming future hydraulics: A new design of a hydraulic transformer, The 5th Scandinavian International Conference on Fluid Power (SICFP’97), Linköping, Sweden, 1-18.
2. Achten, P., Vael, G., Brink, T., Potma, J. ve Schellekens, M. (2011) Efficiency measurements of the hydrid motor/pump, The Twelfth Scandinavian International Conference on Fluid Power (SICFP’11), 3(1), Finland, 41-49.
3. Andersson, B.R. (1980) A survey of load-sensing systems, The BFPR Journal, 13(1) 103-115. doi: 10.1177/0959651813512820
4. Biedermenn, O.J., Engelhardt, J. ve Geerling, G. (2009) More efficient fluid power systems using variable displacement hydraulic motors, Technical University Hamburg, Section: Aircraft Systems Engineering, Germany, 1-8. doi:10.15480/882.228
5. Drumea, P. (2008) Energy losses in hydraulic systems, FLUIDAS Asociatia Nationala Profesionala De Hidrolica Si Pneumatica, Bucuresti, Romania, 1-10.
6. Eriksson, B. (2007) Control strategy for energy efficient fluid power actuators–utilizing individual metering, Licentiate Thesis, Thesis No: 1341, Linkoping University, 13-17. ISBN: 978-91-85895-06-9
7. Eriksson, B. (2010) Mobile fluid power systems design–with a focus on energy efficiency, PhD Thesis, Linkoping University. ISBN:978-91-7393-304-9
8. Eriksson, B. ve Palmberg, J.O. (2011) Individual metering fluid power systems: challenges and opportunities, Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 225, 196-211. doi: 10.1243/09596518JSCE1111

9. Gomm, R. ve Vanderlaan, D. (2009) Velocity control of unbalanced hydraulic actuator subjected to over-center load conditions, Patent: EP 2318720.
10. Grey, C.L. (2011) Is the hydraulics industry ready for a world desperate for affordable transportation?, The Eleventh IFPE Conference, Las Vegas, USA, 1-25.
11. Heybroek, K. (2008) Saving energy in construction machinery using displacement control hydraulics–concept realization and validation, PhD Thesis, No.1372, Linkoping University. ISBN 978-91-7393-860-0
12. Rahmfeld, R. ve Ivantysynova, M. (2001) Displacement controlled linear actuator with differential cylinder–a way to save primary energy in mobile machines, Fifth International Conference on Fluid Power Transmission and Control (ICFP), Hangzhou, China, 316-322.
13. Raymond, E.T. ve Chenoweth, C.C. (1993) Aircraft flight control actuation system design, SAE Inc., USA. ISBN: 1560913762
14. Rydberg, K.E. (2005) Hydraulic accumulators as key components in energy efficient mobile systems, Sixth International Conference on Fluid Power Transmission and Control (ICFP), Hangzhou, China, 2-5. ISBN/ISSN: 7506274027
15. Rydberg, K.E. (2009) Energy efficient hydraulic hybrid drives, The 11th Scandinavian International Conference on Fluid Power (SICFP’09), Linköping, Sweden, 1-14. ISBN: 978-91-7393-588-3
16. Shang, T. (2004) Improving performance of an energy efficient hydraulic circuit, MSc Thesis, University of Saskatchewan, Canada, 128-130. http://hdl.handle.net/10388/etd-04242004-151248
17. Sullivan, J.A. (1989) Fluid power theory and applications, 3rd ed., Prentice Hall, New Jersey. ISBN 13: 9780133230802
18. Vael, G., Achten, P. ve Brink, T. (2009) Efficiency of a variable displacement open circiut floating cup pump, The 11th Scandinavian International Conference on Fluid Power (SICFP’07), Linkoping, Sweden, 20-21. ISBN: 978-91-7393-589-0.
19. Wang, L. ve Book, J.W. (2013) Using leakage to stabilize a hydraulic circuit for pump controlled actuators, Journal of Dynamic System Measurement Control, 135, 1-12. doi:10.1115/1.4024900
20. Weber, J. ve Burget, W. (2012) Mobile systems-markets, industrial needs and technological trends, 8th International Fluid Power Conference (IFK), Dresden, Germany, 2(1), 23-54.
21. Wendel, G. (2002) Hydraulic system configurations for improved efficiency, SAE Technical Paper, No: 01-1433. doi: 10.4271/2002-01-1433
22. Werndin, R. ve Palmberg, J.O. (2003) Hydraulic transformers–comparison of different designs, The Eighth Scandinavian International Conference of Fluid Power (SICFP’03), Finland, 1-6.