Effects of Ultrasonic Disintegration on the Characteristics of Paint Sludge from Automotive Industry

Yıl 2016, Cilt: 21 Sayı: 2, 219 - 226, 03.11.2016

Güray Salihoglu Elif Akcan

https://doi.org/10.17482/uujfe.30834

Öz

The effects of ultrasonic pre-treatment (disintegration) on the characteristics of water-based paint sludge from automotive industries were investigated by monitoring the parameters such as pH, total organic carbon (TOC), soluble chemical oxygen demand (sCOD), and humidity loss. The influence of ultrasonication duration and intensity over the monitoring parameters was examined.The findings showed that ultrasonication increased the pH, TOC, sCOD and humidity loss levels of paint sludges. However, it was obvious that the intensity and duration of the sonication should be applied according to the sludge management method planned. Increasing the intensity of the sonication resulted in an increase in pH and sCOD levels, while decreased the TOC and loss of humidity levels. Similarly, when the duration of sonication increased, the pH and SCOD increased; TOC and loss of humidity decreased.

Anahtar Kelimeler

Sludge management, TOC; sCOD; loss of humidity

OTOMOTİV ENDÜSTRİSİ BOYA ÇAMURUNDA ULTRASONİK DEZENTEGRASYONUN ETKİSİ

Öz

Bu çalışmada, ultrasonik ön işlemin (dezentegrasyon) otomotiv endüstrisinden kaynaklanan su bazlı boya çamuru üzerindeki etkileri, pH, toplam organik karbon (TOC), çözünmüş kimyasal oksijen ihtiyacı (KOİ) ve nem kaybı parametreleri izlenerek incelenmiştir. Ultrasonik dezentegrasyon süresinin ve şiddetinin izlenen parametreler üzerindeki etkisi araştırılmıştır. Çalışmada, ultrasonik dezentegrasyonun boya çamurunun pH, TOC, KOİ ve nem kaybı değerlerini artırdığı görülmüştür. Ancak, uygulanacak sonikasyon şiddeti ve süresinin planlanan atık yönetim modeline göre uygulanması gerektiği belirlenmiştir. Sonikasyon şiddetinin artması pH ve çözünmüş KOİ parametrelerinin seviyelerinin artmasına neden olurken, TOC ve nem kaybında azalmaya neden olmuştur. Benzer şekilde, sonikasyon süresi artınca pH’ın ve çözünmüş KOİ’nin arttığı, TOC ve nem kaybının azaldığı görülmüştür.

Anahtar Kelimeler

Çamur yönetimi, TOC; çözünür KOİ; nem kaybı

Kaynakça

• Appels, L., Dewil, R., Baeyens, J., Degrève, J. (2008) Ultrasonically enhanced anaerobic digestion of waste activated sludge, International Journal of Sustainable Engineering, 1(2) 94-104. doi: 10.1080/19397030802243319
• Erden, G., Filibeli, A. (2010) Kentsel nitelikli arıtma çamurlarının ultrasonik yöntemle ön arıtımı, Su Kirlenmesi Kontrolü- itüdergisi/e, 20(1), 39-48.
• Lehne, G., Müller, J.A, Schwedes, J. (2001) Mechanical disintegration of sewage sludges, Water Science and Technology, 43(1), 19-26.
• Müller, J.A. (2003) Conditioning, Thickening, and Dewatering of Mechanically Disintegrated Excess Sludge, Separation Science and Technology, 38(4), 889-901. doi: 10.1081/SS-120017632
• Müller, J.A. (2000) Disintegration as a key-step in sewage sludge treatment, Water Science and Technology, 41 (8), 123-130.
• Nickel, K., Neis, U. (2007) Ultrasonic disintegration of biosolids for improved biodegradation,Ultrasonics Sonochemistry, 14, 450-455. doi:10.1016/j.ultsonch.2006.10.012
• Salihoglu, G., Salihoglu, N.K. (2016) A review on paint sludge from automotive industries: Generation, characteristics and management, Journal of Environmental Management., 169, 223-235. doi: 10.1016/j.jenvman.2015.12.039
• Standard Methods (1998) Standard Methods for the Examination of Water and Wastewater, twentieth ed. American Public Health Association, American Water Works Association, Water Environment Federation, USA.
• St.Louis D.M. (1996) Process for producing building materials from paint sludge. United States Patent N° 5,573,587 (Nov. 12, 1996).
• Tiehm, A., Nickel, K., Neis, U. (1997) The use of ultrasound to accelerate the anaerobic digestion of sewage sludges, Water Science and Technology, 36 (11), 121-128.
• Vranitzky, R., Lahnsteiner, J. (2005) Sewage sludge disintegration using ozone – A method of enhancing the anaerobic stabilization of sewage sludge, VA TECH WABAH, R&D Process Engineering, Siemensstrasse 89, A-1211, Vienna, Austria.