Kitting-Based Design of the In-plant Logistics Processes

Yıl 2018, Cilt: 23 Sayı: 4, 83 - 98, 31.12.2018

Mehmet Bülent Durmuşoğlu , Eda Sol Emre Çevikcan , Şule İtır Satoğlu

https://doi.org/10.17482/uumfd.456038

Öz

Lean logistics aims
elimination of the non-value adding material handling and storage processes
both within the plants and among the supplier and customer companies, based on
lean thinking. In this context, the required parts must be delivered
effectively and systematically to the assembly stations, as much as required
and just-in time. However, due to the increase in the uncommon parts variety,
and erratic product demands, some new approaches of parts distribution to the
assembly lines is strongly required. Kitting or kit-delivery is one of these
new approaches. In this study, it is aimed to develop a parts delivery
methodology based on kitting and hence to plan and manage in-plant parts
distribution processes, effectively. In addition, based on a real case study,
the proposed methodology is explained. The unique aspect of this study is that
an integrated methodology that considers all stages of parts delivery based on
kitting is proposed, and the developed methodology can be applied to many
industrial sectors. 

Anahtar Kelimeler

In-plant logistics, integrated kitting-based parts feeding system, assembly lines

FABRİKA İÇİ LOJİSTİK SÜREÇLERİNİN SET YAPMA ESASLI TASARIMI VE BİR UYGULAMA

Öz

Yalın lojistik, yalın düşünce çerçevesinde, gerek fabrika
içi, gerekse müşteri-tedarikçi firmalar arası katma değeri olmayan malzeme
taşıma ve depolama süreçlerinin ortadan kaldırılmasını amaçlar. Bu kapsamda, üretim
içinde montaj istasyonlarına gerekli olan parçaların ihtiyaç duyulan miktarda,
tam zamanında, sistematik ve etkin bir biçimde beslenmesi gerekmektedir. Ancak
ürünlerin farklı modellerinde ortak olmayan parça çeşitliliğinin artması, ürün
taleplerinin değişken hale gelmesi gibi nedenlerle montaj hatlarına malzeme
besleme konusunda yenilikçi yaklaşımlar izlenmesine ihtiyaç duyulmuştur. Set
halinde teslimat bu tür yenilikçi bir fabrika içi malzeme besleme yaklaşımıdır.
Bu çalışmada, montaj hatlarına set yapma esaslı malzeme beslemeye yönelik bir
metodoloji geliştirilmesi ve böylece fabrika içi lojistik süreçlerinin etkin
bir şekilde planlanmasını ve yönetilmesini sağlamak amaçlanmıştır. Ayrıca
gerçek bir uygulama örneği ile önerilen metodoloji açıklanmıştır. Makalenin
özgün yönü, set yapma temelli malzeme beslemeye yönelik tüm aşamaları içeren,
bütünsel bir yaklaşım geliştirilmesi ve metodolojinin birçok endüstri dalında
uygulanabilecek nitelikte olmasıdır. 

Anahtar Kelimeler

Üretim Lojistiği, Yalın Lojistik, Set Yapma

Kaynakça

• Baudin, M. (2005) Lean logistics: the nuts and bolts of delivering materials and goods, CRC Press.
• Bedworth, D. D., Bailey, J. (1987). Integrated production control systems, analysis, design. John Wiley & Sons, 370–374.
• Boudella, M. E. A., Sahin, E., Dallery, Y. (2018). Kitting optimisation in Just-in-Time mixed-model assembly lines: assigning parts to pickrs in a hybrid robot–operator kitting system, International Journal of Production Research, 56(16), 5475-5494. doi:10.1080/00207543.2017.1418988
• Boysen, N., Emde, S., Hoeck, M., Kauderer, M. (2015) Part logistics in the automotive industry: Decision problems, literature review and research agenda, European Journal of Operational Research, 242(1), 107-120. doi:10.1016/j.ejor.2014.09.065
• Bozer, Y. A., McGinnis, L.F. (1992) Kitting versus line stocking: A conceptual framework and a descriptive model, International Journal of Production Economics, 28, 1-19. doi:10.1016/0925-5273(92)90109-K
• Caputo, A.C., Pelagagge, P.M., Salini, P. (2016) Selection of assembly lines feeding policies based on parts features, IFAC-PapersOnLine, 49(12), 185-190. doi:10.1016/j.ifacol.2016.07.593
• Caputo, A. C., Pelagagge, P. M., Salini, P. (2018) Selection of assembly lines feeding policies based on parts features and scenario conditions, International Journal of Production Research, 56(3), 1208-1232. doi:10.1080/00207543.2017.1407882.
• Carlson, J.G., Yao, A.C., Girouard, W.F. (1994) The role of master kits in assembly operations, International Journal of Production Economics, 35, 253-258. doi:10.1016/0925-5273(94)90089-2
• Carlson, O., Hensvold, B, (2008) Kitting in a high variation assembly line. A case study at Caterpillar BCP-E, Master Thesis. Lulea University of Technology.
• Choobineh, F., Mohebbi, E. (2004) Material planning for production kits under uncertainty, Production Planning and Control, 13(1), 63-70. doi:10.1080/09537280310001659164
• Çorakçı, M.A. (2008) An evaluation of kitting systems in lean production. Yüksek Lisans Tezi, University of Boras, School of Engineering, Boras.
• Faccio, M. (2014) The impact of production mix variations and models varieties on the parts-feeding policy selection in a JIT assembly system, International Journal of Advanced Manufacturing Technology, 72, 543-560. doi:10.1007/s00170-014-5675-0
• Gecü, B. (2008), İç lojistik sistemlerinin yalın üretim bakış açısıyla yeniden tasarlanması ve otomotiv sektöründe örnek bir uygulama, Istanbul Teknik Üniversitesi, Yüksek Lisans Tezi.
• Günther, H.O., Gronalt, M., and Piller, F. (1996) Component kitting in semi-automated printed circuit board assembly, International Journal of Production Economics, 43, 213-226. doi:10.1016/0925-5273(96)00044-8
• Hanson, R., Brolin, A. (2013) A comparison of kitting and continuous supply in in-plant materials supply, International Journal of Production Research, 51(4), 979-992. doi:10.1080/00207543.2012.657806.
• Hua, S.Y., Johnson, D. (2010) Research issues on factors influencing the choice of kitting versus line stocking, International Journal of Production Research, 48(3), 779-800. doi:10.1080/00207540802456802
• Hua, W., Zhou, C. (2008) Clusters and filling-curve-based storage assignment in a circuit board assembly kitting area, IIE Transactions, 40(6), 569-585. doi:10.1080/07408170701503462
• Karadayı, S., Öksuz, M.K., Durmuşoğlu, M.B. (2017) Design methodology for a hybrid part feeding system in lean-based assembly lines, Assembly Automation, 37(1), 84-102. doi:10.1108/AA-09-2016-114
• Kılıç, H.S., Durmuşoğlu, M.B. (2012) Design of kitting system in lean‐based assembly lines, Assembly Automation, 32(3), 226-234. doi:10.1108/01445151211244357
• Limère, V., Van Landeghem, H., Goetschalckx, M. (2015) A decision model for kitting and line stocking with variable operator walking distances, Assembly Automation, 35(1), 47-56. doi:10.1108/AA-05-2014-043
• Loveland, L.J., Monkman, S.K., and Morrice, D.J. (2007) Dell uses a new production-scheduling algorithm to accommodate increased product variety, Interfaces, 37(3), 209-219. doi:10.1287/inte.1060.0264
• Medbo, L. (2003) Assembly work execution and materials kit functionality in parallel flow assembly systems, International Journal of Industrial Ergonomics, 31, 263-281. doi:10.1016/S0169-8141(02)00220-2
• Ramachandran, S., Delen, D. (2005) Performance analysis of a kitting process in stochastic assembly systems, Computers & Operations Research, 32(4), 449-463. doi:10.1016/S0169-8141(02)00220-2
• Ramakrishnan, R., Krishnamurthy, A., (2008) Analytical approximations for kitting systems with multiple inputs, Asia-Pacific Journal of Operations Research, 25(2), 187-216. doi:10.1142/S0217595908001742
• Sali, M., Şahin, E., Patchong, A. (2015) An empirical assessment of the performances of three line feeding modes used in the automotive sector: line stocking vs. kitting vs. sequencing, International Journal of Production Research, 53(5), 1439-1459. doi:10.1080/00207543.2014.944630
• Satoğlu, Ş. I., Şahin, I. E. (2013) Design of a just-in-time periodic material supply system for the assembly lines and an application in electronics industry, International Journal of Advanced Manufacturing Technology, 65(1-4), 319-332. doi:10.1007/s00170-012-4171-7
• Satoğlu, Ş. I., Uçan, K. (2015, Mart). Redesigning the material supply system of the automotive suppliers based on lean principles and an application. In Industrial Engineering and Operations Management (IEOM), 2015, International Conference on (1-6). IEEE. doi:10.1109/IEOM.2015.7093860
• Sellers, C.J., Nof, Y., (1989) Performance analysis of robotic kitting systems, Robotics and Computer-Integrated Manufacturing, 6(1),15-24. doi:10.1016/0736-5845(89)90081-1
• Sol, E. (2010), Set Şeklinde Teslimat İle Hat Kenarı Besleme Sisteminin Karşılaştırılması, Yalın Lojistik Bakış Açısıyla İç Lojistik Faaliyetlerin Tasarlanması Ve Örnek Bir Uygulama, Istanbul Teknik Üniversitesi, Yüksek Lisans Tezi.