AISI 1050 ÇELİĞİ ÜZERİNE INCONEL 718 LAZER DOLGU KAYNAĞININ MORFOLOJİSİ, MİKROYAPISI VE MEKANİK KARAKTERİZASYONU

Ali Arı; Taner Karagöz; Orhun Arslan; Ali Bayram

doi:10.17482/uumfd.1228584

Araştırma Makalesi

AISI 1050 ÇELİĞİ ÜZERİNE INCONEL 718 LAZER DOLGU KAYNAĞININ MORFOLOJİSİ, MİKROYAPISI VE MEKANİK KARAKTERİZASYONU

Yıl 2023, Cilt: 28 Sayı: 2, 613 - 630, 31.08.2023

Ali Arı , Taner Karagöz , Orhun Arslan , Ali Bayram

https://doi.org/10.17482/uumfd.1228584

Cited By: 1

Öz

Bu çalışma kapsamında, Inconel 718 tozunun AISI 1050 imalat çeliği üzerine lazerle dolgu kaynağı işlemi uygulandı. Bu işlem sırasında, dispersiyonun mekanik özellikler üzerindeki etkisini analiz etmek için, ilgili parametrelerde üretilen numuneler üzerinde ampirik bir çalışma gerçekleştirildi. Sonuçlar, kopma gerilmesi ve süneklik için yüksek sapmalar olduğunu göstermektedir. Bu dağılım, biriken malzemede gözenekliliğin varlığından kaynaklanmaktadır. Ayrıca, en iyi sonuçlar merkez bölgedeki numunelerden alınırken, dış bölgelerden alınan numuneler üzerinde yapılan testler kopma gerilmesi ve süneklik için daha düşük değerler göstermiştir. Bunun yanında sertlik değerleri incelendiğinde ısıdan etkilenen bölgenin ana malzemeden daha sert olduğu ve bu da ısıdan etkilenen bölgenin soğuma hızından kaynaklandığı görülmüştür. Buna ilaveten de Laves fazı, zamanla kırılmaya yol açan mikro boşlukların üretilmesinin ana nedeni olduğu anlaşılmıştır.

Anahtar Kelimeler

Inconel 718, AISI 1050, lazerle dolgu kaynağı, mekanik özellikler

Kaynakça

1. Alizadeh-Sh, M., Marashi, S.P.H., Ranjbarnodeh, E., Shoja-Razavi, R. ve Oliveira, J.P. (2020) Prediction of solidification cracking by an empirical-statistical analysis for laser cladding of Inconel 718 powder on a non-weldable substrate. Optics & Laser Technology, 128, 106244. doi:10.1016/J.OPTLASTEC.2020.106244
2. Aydin, H., Altay, M., Karşi, A., Ergin, D., Onayli, A. ve Bayram, A. (2022) Effect of Laser Cladding Parameters in Laser Direct Metal Deposition (LDMD) of Martensitic Stainless Steel Powder on Ductile Cast Iron. Lasers in Engineering, 52(3), 87–106.
3. Aydogan, B., O’Neil, A. ve Sahasrabudhe, H. (2021) Microstructural and mechanical characterization of stainless steel 420 and Inconel 718 multi-material structures fabricated using laser directed energy deposition. Journal of Manufacturing Processes, 68(PA), 1224–1235. doi:10.1016/j.jmapro.2021.06.031
4. DebRoy, T., Wei, H.L., Zuback, J.S., Mukherjee, T., Elmer, J.W., Milewski, J.O., Beese, A.M., Wilson-Heid, A., De, A. ve Zhang, W. (2018) Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science, 92, 112–224. doi:10.1016/J.PMATSCI.2017.10.001
5. Gao, Z., Wang, L., Wang, Y., Lyu, F. ve Zhan, X. (2022) Crack defects and formation mechanism of FeCoCrNi high entropy alloy coating on TC4 titanium alloy prepared by laser cladding. Journal of Alloys and Compounds, 903, 163905. doi:10.1016/J.JALLCOM.2022.163905
6. Ilanlou, M., Shoja Razavi, R., Nourollahi, A., Hosseini, S. ve Haghighat, S. (2022) Prediction of the geometric characteristics of the laser cladding of Inconel 718 on the Inconel 738 substrate via genetic algorithm and linear regression. Optics & Laser Technology, 156, 108507. doi:10.1016/J.OPTLASTEC.2022.108507
7. Jelvani, S., Shoja Razavi, R., Barekat, M., Dehnavi, M. R. ve Erfanmanesh, M. (2019) Evaluation of solidification and microstructure in laser cladding Inconel 718 superalloy. Optics & Laser Technology, 120, 105761. doi:10.1016/J.OPTLASTEC.2019.105761
8. Poloczek, T., Lont, A. ve Górka, J. (2022) The structure and properties of laser-cladded Inconel 625/TiC composite coatings. Materials, 16(3), 1265. doi: 10.3390/ma16031265
9. Kang, L., Chen, F., Wu, B., Liu, X. ve Ge, H. (2022) Mechanical properties and microstructure of laser-cladding additively manufactured 316L stainless steel sheets. Journal of Constructional Steel Research, 199, 107603. doi:10.1016/J.JCSR.2022.107603
10. Lambarri, J., Leunda, J., García Navas, V., Soriano, C. ve Sanz, C. (2013) Microstructural and tensile characterization of Inconel 718 laser coatings for aeronautic components. Optics and Lasers in Engineering, 51(7), 813–821. doi:10.1016/j.optlaseng.2013.01.011
11. Lee, K.K., Kim, H.S., Ahn, D.G. ve Lee, H. (2022) Thermo-mechanical characteristics of inconel 718 layer deposited on AISI 1045 steel substrate using a directed energy deposition process. Journal of Materials Research and Technology, 17, 293–309. doi:10.1016/j.jmrt.2021.12.112
12. Lu, S., Zhou, J., Wang, L. ve Liang, J. (2021) Influence of MoSi2 on the microstructure and elevated-temperature wear properties of Inconel 718 coating fabricated by laser cladding. Surface and Coatings Technology, 424(August), 127665. doi:10.1016/j.surfcoat.2021.127665
13. Muvvala, G., Mullick, S. ve Nath, A.K. (2020) Development of process maps based on molten pool thermal history during laser cladding of Inconel 718/TiC metal matrix composite coatings. Surface and Coatings Technology, 399, 126100. doi:10.1016/J.SURFCOAT.2020.126100
14. Ning, J., Zhang, H.B., Chen, S. M., Zhang, L.J. ve Na, S.J. (2021) Intensive laser repair through additive manufacturing of high-strength martensitic stainless steel powders (I) –powder preparation, laser cladding and microstructures and properties of laser-cladded metals. Journal of Materials Research and Technology, 15, 5746–5761. doi:10.1016/J.JMRT.2021.10.109
15. Qi, H., Azer, M. ve Ritter, A. (2009) Studies of standard heat treatment effects on microstructure and mechanical properties of laser net shape manufactured INCONEL 718. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 40(10), 2410–2422. doi:10.1007/s11661-009-9949-3
16. Shayanfar, P., Daneshmanesh, H. ve Janghorban, K. (2020) Parameters Optimization for Laser Cladding of Inconel 625 on ASTM A592 Steel. Journal of Materials Research and Technology, 9(4), 8258–8265. doi:10.1016/j.jmrt.2020.05.094
17. Thawari, N., Gullipalli, C., Katiyar, J.K. ve Gupta, T.V.K. (2021) Effect of multi-layer laser cladding of Stellite 6 and Inconel 718 materials on clad geometry, microstructure evolution and mechanical properties. Materials Today Communications, 28, 102604. doi:10.1016/J.MTCOMM.2021.102604
18. Wang, C., Zhou, J., Zhang, T., Meng, X., Li, P. ve Huang, S. (2022) Numerical simulation and solidification characteristics for laser cladding of Inconel 718. Optics & Laser Technology, 149, 107843. doi:10.1016/J.OPTLASTEC.2021.107843
19. Wolff, S.J., Gan, Z., Lin, S., Bennett, J.L., Yan, W., Hyatt, G., Ehmann, K.F., Wagner, G.J., Liu, W.K. ve Cao, J. (2019) Experimentally validated predictions of thermal history and microhardness in laser-deposited Inconel 718 on carbon steel. Additive Manufacturing, 27, 540–551. doi:10.1016/j.addma.2019.03.019
20. Xu, D., Wang, H., Tao, X., Yao, Z., Zhang, S. ve Oleksander, M. (2021) Investigation on Microstructure, Hardness and Wear Resistance of Electron Beam Wire-Feeding Deposited Inconel 718 Alloy Coatings. Metals and Materials International, 27(5), 1263–1272. doi:10.1007/s12540-019-00494-x
21. Mathoho, I., Akinlabi, E.T., Arthur, N. ve Tlotleng, M. (2020) Impact of DED process parameters on the metallurgical characteristics of 17-4 PH SS deposited using DED. CIRP Journal of Manufacturing Science and Technology, 31, 450–458. doi:10.1016/j.cirpj.2020.07.007
22. Zeng, X., Wang, Q., Chen, C., Lian, G. ve Huang, X. (2021) Effects of WC addition on the morphology, microstructure and mechanical properties of Fe50/TiC/WC laser claddings on AISI 1045 steel. Surface and Coatings Technology, 427(September), 127781. doi:10.1016/j.surfcoat.2021.127781
23. Zhang, J., Meng, G., Zhu, L., Yang, Z., Xue, P. ve Xu, P. (2022) Formation mechanism and mechanical properties of TiC reinforced Inconel 718 composite coatings by laser cladding on H13 steel. International Journal of Advanced Manufacturing Technology, 121, 3597–3611. doi:10.1007/s00170-022-09545-x
24. Zhang, Y., Li, Z., Nie, P. ve Wu, Y. (2013) Effect of heat treatment on niobium segregation of laser-cladded IN718 alloy coating. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44(2), 708–716. doi:10.1007/s11661-012-1459-z
25. Zhou, S., Xu, T., Hu, C., Wu, H., Liu, H. ve Ma, X. (2021) Effect of different topologies on microstructure and mechanical properties of multilayer coatings deposited by laser cladding with Inconel 625 wire. Surface and Coatings Technology, 421(April), 127299. doi:10.1016/j.surfcoat.2021.127299

Morphology, Microstructure and Mechanical Characterization of Inconel 718 Laser Cladding Application on AISI 1050 Steel

Yıl 2023, Cilt: 28 Sayı: 2, 613 - 630, 31.08.2023

Ali Arı , Taner Karagöz , Orhun Arslan , Ali Bayram

https://doi.org/10.17482/uumfd.1228584

Cited By: 1

Öz

Within the scope of this study, Laser Cladding of Inconel 718 powder was applied on AISI 1050 fabrication steel. During this process, to analyze the effect of dispersion on mechanical properties, an empirical study was carried out on the samples produced at the relevant parameters. The results show high deviations for breaking stress and ductility. This distribution is due to the presence of porosity in the deposited material. Also, the best results were obtained from the samples in the central region, while the tests performed on the samples from the outer regions showed lower values for breaking stress and ductility. In addition, when the hardness values were examined, it was seen that the heat-affected area was harder than the base material and this was due to the cooling rate of the heat-affected area. In addition, the Laves phase was found to be the main cause of the generation of micro-voids that lead to fracture over time.

Anahtar Kelimeler

Inconel 718, AISI 1050, laser cladding, mechanical properties

Kaynakça

1. Alizadeh-Sh, M., Marashi, S.P.H., Ranjbarnodeh, E., Shoja-Razavi, R. ve Oliveira, J.P. (2020) Prediction of solidification cracking by an empirical-statistical analysis for laser cladding of Inconel 718 powder on a non-weldable substrate. Optics & Laser Technology, 128, 106244. doi:10.1016/J.OPTLASTEC.2020.106244
2. Aydin, H., Altay, M., Karşi, A., Ergin, D., Onayli, A. ve Bayram, A. (2022) Effect of Laser Cladding Parameters in Laser Direct Metal Deposition (LDMD) of Martensitic Stainless Steel Powder on Ductile Cast Iron. Lasers in Engineering, 52(3), 87–106.
3. Aydogan, B., O’Neil, A. ve Sahasrabudhe, H. (2021) Microstructural and mechanical characterization of stainless steel 420 and Inconel 718 multi-material structures fabricated using laser directed energy deposition. Journal of Manufacturing Processes, 68(PA), 1224–1235. doi:10.1016/j.jmapro.2021.06.031
4. DebRoy, T., Wei, H.L., Zuback, J.S., Mukherjee, T., Elmer, J.W., Milewski, J.O., Beese, A.M., Wilson-Heid, A., De, A. ve Zhang, W. (2018) Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science, 92, 112–224. doi:10.1016/J.PMATSCI.2017.10.001
5. Gao, Z., Wang, L., Wang, Y., Lyu, F. ve Zhan, X. (2022) Crack defects and formation mechanism of FeCoCrNi high entropy alloy coating on TC4 titanium alloy prepared by laser cladding. Journal of Alloys and Compounds, 903, 163905. doi:10.1016/J.JALLCOM.2022.163905
6. Ilanlou, M., Shoja Razavi, R., Nourollahi, A., Hosseini, S. ve Haghighat, S. (2022) Prediction of the geometric characteristics of the laser cladding of Inconel 718 on the Inconel 738 substrate via genetic algorithm and linear regression. Optics & Laser Technology, 156, 108507. doi:10.1016/J.OPTLASTEC.2022.108507
7. Jelvani, S., Shoja Razavi, R., Barekat, M., Dehnavi, M. R. ve Erfanmanesh, M. (2019) Evaluation of solidification and microstructure in laser cladding Inconel 718 superalloy. Optics & Laser Technology, 120, 105761. doi:10.1016/J.OPTLASTEC.2019.105761
8. Poloczek, T., Lont, A. ve Górka, J. (2022) The structure and properties of laser-cladded Inconel 625/TiC composite coatings. Materials, 16(3), 1265. doi: 10.3390/ma16031265
9. Kang, L., Chen, F., Wu, B., Liu, X. ve Ge, H. (2022) Mechanical properties and microstructure of laser-cladding additively manufactured 316L stainless steel sheets. Journal of Constructional Steel Research, 199, 107603. doi:10.1016/J.JCSR.2022.107603
10. Lambarri, J., Leunda, J., García Navas, V., Soriano, C. ve Sanz, C. (2013) Microstructural and tensile characterization of Inconel 718 laser coatings for aeronautic components. Optics and Lasers in Engineering, 51(7), 813–821. doi:10.1016/j.optlaseng.2013.01.011
11. Lee, K.K., Kim, H.S., Ahn, D.G. ve Lee, H. (2022) Thermo-mechanical characteristics of inconel 718 layer deposited on AISI 1045 steel substrate using a directed energy deposition process. Journal of Materials Research and Technology, 17, 293–309. doi:10.1016/j.jmrt.2021.12.112
12. Lu, S., Zhou, J., Wang, L. ve Liang, J. (2021) Influence of MoSi2 on the microstructure and elevated-temperature wear properties of Inconel 718 coating fabricated by laser cladding. Surface and Coatings Technology, 424(August), 127665. doi:10.1016/j.surfcoat.2021.127665
13. Muvvala, G., Mullick, S. ve Nath, A.K. (2020) Development of process maps based on molten pool thermal history during laser cladding of Inconel 718/TiC metal matrix composite coatings. Surface and Coatings Technology, 399, 126100. doi:10.1016/J.SURFCOAT.2020.126100
14. Ning, J., Zhang, H.B., Chen, S. M., Zhang, L.J. ve Na, S.J. (2021) Intensive laser repair through additive manufacturing of high-strength martensitic stainless steel powders (I) –powder preparation, laser cladding and microstructures and properties of laser-cladded metals. Journal of Materials Research and Technology, 15, 5746–5761. doi:10.1016/J.JMRT.2021.10.109
15. Qi, H., Azer, M. ve Ritter, A. (2009) Studies of standard heat treatment effects on microstructure and mechanical properties of laser net shape manufactured INCONEL 718. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 40(10), 2410–2422. doi:10.1007/s11661-009-9949-3
16. Shayanfar, P., Daneshmanesh, H. ve Janghorban, K. (2020) Parameters Optimization for Laser Cladding of Inconel 625 on ASTM A592 Steel. Journal of Materials Research and Technology, 9(4), 8258–8265. doi:10.1016/j.jmrt.2020.05.094
17. Thawari, N., Gullipalli, C., Katiyar, J.K. ve Gupta, T.V.K. (2021) Effect of multi-layer laser cladding of Stellite 6 and Inconel 718 materials on clad geometry, microstructure evolution and mechanical properties. Materials Today Communications, 28, 102604. doi:10.1016/J.MTCOMM.2021.102604
18. Wang, C., Zhou, J., Zhang, T., Meng, X., Li, P. ve Huang, S. (2022) Numerical simulation and solidification characteristics for laser cladding of Inconel 718. Optics & Laser Technology, 149, 107843. doi:10.1016/J.OPTLASTEC.2021.107843
19. Wolff, S.J., Gan, Z., Lin, S., Bennett, J.L., Yan, W., Hyatt, G., Ehmann, K.F., Wagner, G.J., Liu, W.K. ve Cao, J. (2019) Experimentally validated predictions of thermal history and microhardness in laser-deposited Inconel 718 on carbon steel. Additive Manufacturing, 27, 540–551. doi:10.1016/j.addma.2019.03.019
20. Xu, D., Wang, H., Tao, X., Yao, Z., Zhang, S. ve Oleksander, M. (2021) Investigation on Microstructure, Hardness and Wear Resistance of Electron Beam Wire-Feeding Deposited Inconel 718 Alloy Coatings. Metals and Materials International, 27(5), 1263–1272. doi:10.1007/s12540-019-00494-x
21. Mathoho, I., Akinlabi, E.T., Arthur, N. ve Tlotleng, M. (2020) Impact of DED process parameters on the metallurgical characteristics of 17-4 PH SS deposited using DED. CIRP Journal of Manufacturing Science and Technology, 31, 450–458. doi:10.1016/j.cirpj.2020.07.007
22. Zeng, X., Wang, Q., Chen, C., Lian, G. ve Huang, X. (2021) Effects of WC addition on the morphology, microstructure and mechanical properties of Fe50/TiC/WC laser claddings on AISI 1045 steel. Surface and Coatings Technology, 427(September), 127781. doi:10.1016/j.surfcoat.2021.127781
23. Zhang, J., Meng, G., Zhu, L., Yang, Z., Xue, P. ve Xu, P. (2022) Formation mechanism and mechanical properties of TiC reinforced Inconel 718 composite coatings by laser cladding on H13 steel. International Journal of Advanced Manufacturing Technology, 121, 3597–3611. doi:10.1007/s00170-022-09545-x
24. Zhang, Y., Li, Z., Nie, P. ve Wu, Y. (2013) Effect of heat treatment on niobium segregation of laser-cladded IN718 alloy coating. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44(2), 708–716. doi:10.1007/s11661-012-1459-z
25. Zhou, S., Xu, T., Hu, C., Wu, H., Liu, H. ve Ma, X. (2021) Effect of different topologies on microstructure and mechanical properties of multilayer coatings deposited by laser cladding with Inconel 625 wire. Surface and Coatings Technology, 421(April), 127299. doi:10.1016/j.surfcoat.2021.127299

Toplam 25 adet kaynakça vardır.

Ayrıntılar

Birincil Dil	Türkçe
Konular	Makine Mühendisliği
Bölüm	Araştırma Makaleleri
Yazarlar	Ali Arı 0000-0003-2702-2982 Taner Karagöz 0000-0002-4021-3460 Orhun Arslan 0000-0001-5918-0980 Ali Bayram 0000-0001-7311-8358
Erken Görünüm Tarihi	25 Ağustos 2023
Yayımlanma Tarihi	31 Ağustos 2023
Gönderilme Tarihi	3 Ocak 2023
Kabul Tarihi	8 Mayıs 2023
Yayımlandığı Sayı	Yıl 2023 Cilt: 28 Sayı: 2

Kaynak Göster

APA	Arı, A., Karagöz, T., Arslan, O., Bayram, A. (2023). AISI 1050 ÇELİĞİ ÜZERİNE INCONEL 718 LAZER DOLGU KAYNAĞININ MORFOLOJİSİ, MİKROYAPISI VE MEKANİK KARAKTERİZASYONU. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 28(2), 613-630. https://doi.org/10.17482/uumfd.1228584
AMA	Arı A, Karagöz T, Arslan O, Bayram A. AISI 1050 ÇELİĞİ ÜZERİNE INCONEL 718 LAZER DOLGU KAYNAĞININ MORFOLOJİSİ, MİKROYAPISI VE MEKANİK KARAKTERİZASYONU. UUJFE. Ağustos 2023;28(2):613-630. doi:10.17482/uumfd.1228584
Chicago	Arı, Ali, Taner Karagöz, Orhun Arslan, ve Ali Bayram. “AISI 1050 ÇELİĞİ ÜZERİNE INCONEL 718 LAZER DOLGU KAYNAĞININ MORFOLOJİSİ, MİKROYAPISI VE MEKANİK KARAKTERİZASYONU”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 28, sy. 2 (Ağustos 2023): 613-30. https://doi.org/10.17482/uumfd.1228584.
EndNote	Arı A, Karagöz T, Arslan O, Bayram A (01 Ağustos 2023) AISI 1050 ÇELİĞİ ÜZERİNE INCONEL 718 LAZER DOLGU KAYNAĞININ MORFOLOJİSİ, MİKROYAPISI VE MEKANİK KARAKTERİZASYONU. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 28 2 613–630.
IEEE	A. Arı, T. Karagöz, O. Arslan, ve A. Bayram, “AISI 1050 ÇELİĞİ ÜZERİNE INCONEL 718 LAZER DOLGU KAYNAĞININ MORFOLOJİSİ, MİKROYAPISI VE MEKANİK KARAKTERİZASYONU”, UUJFE, c. 28, sy. 2, ss. 613–630, 2023, doi: 10.17482/uumfd.1228584.
ISNAD	Arı, Ali vd. “AISI 1050 ÇELİĞİ ÜZERİNE INCONEL 718 LAZER DOLGU KAYNAĞININ MORFOLOJİSİ, MİKROYAPISI VE MEKANİK KARAKTERİZASYONU”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 28/2 (Ağustos 2023), 613-630. https://doi.org/10.17482/uumfd.1228584.
JAMA	Arı A, Karagöz T, Arslan O, Bayram A. AISI 1050 ÇELİĞİ ÜZERİNE INCONEL 718 LAZER DOLGU KAYNAĞININ MORFOLOJİSİ, MİKROYAPISI VE MEKANİK KARAKTERİZASYONU. UUJFE. 2023;28:613–630.
MLA	Arı, Ali vd. “AISI 1050 ÇELİĞİ ÜZERİNE INCONEL 718 LAZER DOLGU KAYNAĞININ MORFOLOJİSİ, MİKROYAPISI VE MEKANİK KARAKTERİZASYONU”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, c. 28, sy. 2, 2023, ss. 613-30, doi:10.17482/uumfd.1228584.
Vancouver	Arı A, Karagöz T, Arslan O, Bayram A. AISI 1050 ÇELİĞİ ÜZERİNE INCONEL 718 LAZER DOLGU KAYNAĞININ MORFOLOJİSİ, MİKROYAPISI VE MEKANİK KARAKTERİZASYONU. UUJFE. 2023;28(2):613-30.

Cited By

PROJEKSİYON KAYNAĞIN PROSES PARAMETRELERİNİN S355MC KLEVİS BRAKETİN BAĞLANTI PERFORMANSINA ETKİSİ

Uludağ University Journal of The Faculty of Engineering

https://doi.org/10.17482/uumfd.1329959

Makale Dosyaları

Tam Metin

DUYURU:

30.03.2021- Nisan 2021 (26/1) sayımızdan itibaren TR-Dizin yeni kuralları gereği, dergimizde basılacak makalelerde, ilk gönderim aşamasında Telif Hakkı Formu yanısıra, Çıkar Çatışması Bildirim Formu ve Yazar Katkısı Bildirim Formu da tüm yazarlarca imzalanarak gönderilmelidir. Yayınlanacak makalelerde de makale metni içinde "Çıkar Çatışması" ve "Yazar Katkısı" bölümleri yer alacaktır. İlk gönderim aşamasında doldurulması gereken yeni formlara "Yazım Kuralları" ve "Makale Gönderim Süreci" sayfalarımızdan ulaşılabilir. (Değerlendirme süreci bu tarihten önce tamamlanıp basımı bekleyen makalelerin yanısıra değerlendirme süreci devam eden makaleler için, yazarlar tarafından ilgili formlar doldurularak sisteme yüklenmelidir). Makale şablonları da, bu değişiklik doğrultusunda güncellenmiştir. Tüm yazarlarımıza önemle duyurulur.

Bursa Uludağ Üniversitesi, Mühendislik Fakültesi Dekanlığı, Görükle Kampüsü, Nilüfer, 16059 Bursa. Tel: (224) 294 1907, Faks: (224) 294 1903, e-posta: mmfd@uludag.edu.tr