Research Article

Evaluation of the Effect of Mouthrinses on the Color Stability of Hybrid CAD/CAM Blocks

Volume: 12 Number: 1 September 28, 2026
EN TR

Evaluation of the Effect of Mouthrinses on the Color Stability of Hybrid CAD/CAM Blocks

Abstract

Objective: The aim of this study was to investigate the color changes in different hybrid CAD/CAM materials after exposure to various mouthrinses. Material and Methods: Three different resin-based CAD/CAM blocks (Cerasmart, Coltene Brilliant Crios and SHOFU Block HC) were used in this study. A total of 300 CAD/CAM specimens, each with a thickness of 2 mm, were prepared and divided into five groups according to the different mouthrinses. Initial color measurements were performed on a white background using a VITA Easyshade V spectrophotometer (VITA Zahnfabrik, Bad Säckingen, Germany). The specimens were then immersed in four different mouthrinses (Listerine Cool Mint, Sensodyne Promine, Oral B Complete and Colgate Optic White) and artificial saliva for the control group for 24 hours. After immersion, the color measurement was repeated. The obtained data were analyzed using the IBM SPSS Statistic 25.0 software. Normality was assessed using the Kolmogorov-Smirnov and Shapiro Wilk tests. To compare the groups, the one-way ANOVA test was applied to normally distributed data, while the Kruskal-Wallis test was used for non-normally distributed data. Results: Shofu blocks exposed to Listerine Cool Mint were the only group that caused discoloration above the acceptability threshold (ΔE00≤1.8). The highest values above the perceptibility threshold (ΔE00≤0.8) were observed in Shofu blocks. Color changes below the perceptible threshold were observed only in Cerasmart blocks after immersion in Sensodyne Promine mouthrinse (ΔE00=0.6) and artificial saliva (ΔE00=0.67). Conclusions: All CAD/CAM blocks showed some degree of discoloration after exposure to mouthrinses; however, the extent of discoloration varied depending on the material composition.

Keywords

Project Number

2023/22

References

  1. Villarroel M, Fahl N, De Sousa AM, De Oliveira Jr OB. Direct esthetic restorations based on translucency and opacity of composite resins. J Esthet Restor Dent 2011;23:73-87.
  2. Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater 2013;29:419-26.
  3. Rusin RP. Properties and applications of a new composite block for CAD/CAM. Compend Contin Educ Dent 2001;22:35-41.
  4. Acar O, Yilmaz B, Altintas SH, Chandrasekaran I, Johnston WM. Color stainability of CAD/CAM and nanocomposite resin materials. J Prosthet Dent 2016;115:71-5.
  5. Celik C, Yuzugullu B, Erkut S, Yamanel K. Effects of mouth rinses on color stability of resin composites. Eur J Dent 2008;2:247.
  6. Asmussen E, Hansen EK. Surface discoloration of restorative resins in relation to surface softening and oral hygiene. Scand J Dent Res 1986;94:174–7.
  7. DeVore LR. Antimicrobial mouthrinces: impact on dental hygiene. J Am Dent Assoc 1994;125:23-8.
  8. Lamster IB. Antimicrobial mouthrinses and the management of periodontal diseases. JADA 2006;137:5–9.

Details

Primary Language

English

Subjects

Dental Materials and Equipment, Restorative Dentistry

Journal Section

Research Article

Publication Date

September 28, 2026

Submission Date

August 8, 2025

Acceptance Date

November 6, 2025

Published in Issue

Year 2026 Volume: 12 Number: 1

APA
Bozkaya Bilgin, S., Sancak, E. İ., Tekçe, N., & Kavram Sarıhan, K. (2026). Evaluation of the Effect of Mouthrinses on the Color Stability of Hybrid CAD/CAM Blocks. Akdeniz Tıp Dergisi, 12(1). https://doi.org/10.53394/akd.1760708
AMA
1.Bozkaya Bilgin S, Sancak Eİ, Tekçe N, Kavram Sarıhan K. Evaluation of the Effect of Mouthrinses on the Color Stability of Hybrid CAD/CAM Blocks. Akd Med J. 2026;12(1). doi:10.53394/akd.1760708
Chicago
Bozkaya Bilgin, Selen, Elif İlgi Sancak, Neslihan Tekçe, and Kübra Kavram Sarıhan. 2026. “Evaluation of the Effect of Mouthrinses on the Color Stability of Hybrid CAD CAM Blocks”. Akdeniz Tıp Dergisi 12 (1). https://doi.org/10.53394/akd.1760708.
EndNote
Bozkaya Bilgin S, Sancak Eİ, Tekçe N, Kavram Sarıhan K (September 1, 2026) Evaluation of the Effect of Mouthrinses on the Color Stability of Hybrid CAD/CAM Blocks. Akdeniz Tıp Dergisi 12 1
IEEE
[1]S. Bozkaya Bilgin, E. İ. Sancak, N. Tekçe, and K. Kavram Sarıhan, “Evaluation of the Effect of Mouthrinses on the Color Stability of Hybrid CAD/CAM Blocks”, Akd Med J, vol. 12, no. 1, Sept. 2026, doi: 10.53394/akd.1760708.
ISNAD
Bozkaya Bilgin, Selen - Sancak, Elif İlgi - Tekçe, Neslihan - Kavram Sarıhan, Kübra. “Evaluation of the Effect of Mouthrinses on the Color Stability of Hybrid CAD CAM Blocks”. Akdeniz Tıp Dergisi 12/1 (September 1, 2026). https://doi.org/10.53394/akd.1760708.
JAMA
1.Bozkaya Bilgin S, Sancak Eİ, Tekçe N, Kavram Sarıhan K. Evaluation of the Effect of Mouthrinses on the Color Stability of Hybrid CAD/CAM Blocks. Akd Med J. 2026;12. doi:10.53394/akd.1760708.
MLA
Bozkaya Bilgin, Selen, et al. “Evaluation of the Effect of Mouthrinses on the Color Stability of Hybrid CAD CAM Blocks”. Akdeniz Tıp Dergisi, vol. 12, no. 1, Sept. 2026, doi:10.53394/akd.1760708.
Vancouver
1.Selen Bozkaya Bilgin, Elif İlgi Sancak, Neslihan Tekçe, Kübra Kavram Sarıhan. Evaluation of the Effect of Mouthrinses on the Color Stability of Hybrid CAD/CAM Blocks. Akd Med J. 2026 Sep. 1;12(1). doi:10.53394/akd.1760708