Research Article

Monte Carlo Simulation of Porosity and Compressive Strength in Boric Acid-Added Bricks: Effects of Temperature and Additive Ratio

Number: 1 February 24, 2026
TR EN

Monte Carlo Simulation of Porosity and Compressive Strength in Boric Acid-Added Bricks: Effects of Temperature and Additive Ratio

Abstract

In this study, the porosity and compressive strength properties of boric acid added bricks were analyzed by Monte Carlo simulation and the effects of temperature and boric acid ratio changes were modeled. As a result of 10,000 iterations of simulation performed at 1000°C temperature and 2% boric acid content conditions, the average porosity was calculated as 23.60% (standard deviation 1.60, 95% confidence interval [20.52, 26.87]). The average compressive strength was calculated as 143.37 kgf/cm² (standard deviation 4.41, 95% confidence interval [134.63, 151.92]). According to the sensitivity analysis, a negative correlation was found between porosity and temperature (-0.302), and a positive correlation was found between compressive strength and temperature (0.225) and boric acid ratio (0.162). These results provide valuable information for optimizing material performance in brick production.

Keywords

References

  1. 1] Carter, C.B. and M.G. Norton, Solid-state phase transformations and reactions, in Ceramic Materials: Science and Engineering. 2012, Springer. p. 457-475.
  2. [2] Yu, L., et al., Raw material design, sintering temperature optimization and development mechanism investigation of self-foaming porous bricks with high solid waste addition. Chemical Engineering Journal, 2024. 495: p. 153711.
  3. [3] Kurian, M. and S. Thankachan, Introduction: Ceramics classification and applications, in Ceramic catalysts. 2023, Elsevier. p. 1-17.
  4. [4] Vijayan, D., et al., Evaluation of the impact of thermal performance on various building bricks and blocks: A review. Environmental Technology & Innovation, 2021. 23: p. 101577.
  5. [5] Guillon, O., W. Rheinheimer, and M. Bram, A perspective on emerging and future sintering technologies of ceramic materials. Advanced Engineering Materials, 2023. 25(18): p. 2201870.
  6. [6] Labaied, I., et al., Bricks using clay mixed with powder and ashes from lignocellulosic biomass: a review. Applied Sciences, 2022. 12(20): p. 10669.
  7. [7] Sangmesh, B., et al., Development of sustainable alternative materials for the construction of green buildings using agricultural residues: A review. Construction and Building Materials, 2023. 368: p. 130457.
  8. [8] Colangelo, F., et al., Innovative materials in Italy for eco-friendly and sustainable buildings. Materials, 2021. 14(8): p. 2048.

Details

Primary Language

English

Subjects

Chemical Engineering (Other)

Journal Section

Research Article

Publication Date

February 24, 2026

Submission Date

June 13, 2025

Acceptance Date

October 13, 2025

Published in Issue

Year 2026 Number: 1

APA
Yaylaci, C., & Şahin, M. (2026). Monte Carlo Simulation of Porosity and Compressive Strength in Boric Acid-Added Bricks: Effects of Temperature and Additive Ratio. ALKÜ Fen Bilimleri Dergisi, 1, 51-60. https://doi.org/10.46740/alku.1719376
AMA
1.Yaylaci C, Şahin M. Monte Carlo Simulation of Porosity and Compressive Strength in Boric Acid-Added Bricks: Effects of Temperature and Additive Ratio. ALKÜ Fen Bilimleri Dergisi. 2026;(1):51-60. doi:10.46740/alku.1719376
Chicago
Yaylaci, Cihan, and Musa Şahin. 2026. “Monte Carlo Simulation of Porosity and Compressive Strength in Boric Acid-Added Bricks: Effects of Temperature and Additive Ratio”. ALKÜ Fen Bilimleri Dergisi, no. 1: 51-60. https://doi.org/10.46740/alku.1719376.
EndNote
Yaylaci C, Şahin M (February 1, 2026) Monte Carlo Simulation of Porosity and Compressive Strength in Boric Acid-Added Bricks: Effects of Temperature and Additive Ratio. ALKÜ Fen Bilimleri Dergisi 1 51–60.
IEEE
[1]C. Yaylaci and M. Şahin, “Monte Carlo Simulation of Porosity and Compressive Strength in Boric Acid-Added Bricks: Effects of Temperature and Additive Ratio”, ALKÜ Fen Bilimleri Dergisi, no. 1, pp. 51–60, Feb. 2026, doi: 10.46740/alku.1719376.
ISNAD
Yaylaci, Cihan - Şahin, Musa. “Monte Carlo Simulation of Porosity and Compressive Strength in Boric Acid-Added Bricks: Effects of Temperature and Additive Ratio”. ALKÜ Fen Bilimleri Dergisi. 1 (February 1, 2026): 51-60. https://doi.org/10.46740/alku.1719376.
JAMA
1.Yaylaci C, Şahin M. Monte Carlo Simulation of Porosity and Compressive Strength in Boric Acid-Added Bricks: Effects of Temperature and Additive Ratio. ALKÜ Fen Bilimleri Dergisi. 2026;:51–60.
MLA
Yaylaci, Cihan, and Musa Şahin. “Monte Carlo Simulation of Porosity and Compressive Strength in Boric Acid-Added Bricks: Effects of Temperature and Additive Ratio”. ALKÜ Fen Bilimleri Dergisi, no. 1, Feb. 2026, pp. 51-60, doi:10.46740/alku.1719376.
Vancouver
1.Cihan Yaylaci, Musa Şahin. Monte Carlo Simulation of Porosity and Compressive Strength in Boric Acid-Added Bricks: Effects of Temperature and Additive Ratio. ALKÜ Fen Bilimleri Dergisi. 2026 Feb. 1;(1):51-60. doi:10.46740/alku.1719376