Otomotiv Sektöründe Cam

Abstract

Otomotiv endüstrisi geçtiğimiz yüzyıl boyunca önemli ve kayda değer gelişim sergileyerek günümüzde insan hayatının en vazgeçilmez öğelerinden biri haline gelmiştir. Başlangıçta sürücü ve yolcuları dış ortamın etkilerinden korumak için kullanılan camın birçok araştırmanın konusu haline gelmesi ile özellikleri değiştirilmiş ve bu sayede uygulama alanları genişletilmiştir. Ayrıca, üretim teknolojilerinin de izin vermesi ile birlikte camsı karakterde farklı malzemeler de otomotiv endüstrisinin bileşenleri arasına girmiştir. Mevcut çalışmada camın ve camsı malzemelerin geçmişten bugüne otomotiv endüstrisindeki yeri incelenmiş, çeşitli uygulama ve geliştirme çalışmalarından örnekler sunulmuştur.

Keywords

• Cam,otomotiv,kullanım,gelişim

Glass in Automotive Industry

Abstract

During previous century, automotive industry indicated a significant improvement and becoming one of the most important parts of human life today. Glass, which was initially used for the protection of driver and passengers from outside effects, has been an important part of most researches and new properties have been added, thus its usage fields have enlarged. Moreover, through new production technologies, other materials with glassy properties have become an inevitable part of automotive industry. In the present study, the state of glass and glassy materials in automotive industry from past to present time is mentioned with some examples on their applications and developments.

Keywords

• Glass,automotive,usage,development

References

1. [1] Scholze H., "Glass: Nature, Structure and Properties", Springer–Verlag, 1, 1991.
2. [2] Karasu B., Bereket O., Biryan E., Sanoglu D., "The latest developments in glass science and technology", El–Cezeri Fen ve Mühendislik Dergisi, 2017, 4.2: 209–233.
3. [3] https://bilgihanem.com/camin-icadi-cam-nedir/ (Erişim Tarihi: 22.12.2018).
4. [4] Buruga K., Kalathi J. T., "Performance of halloysite nanotube/poly (styrene–co–methylmethacrylate) nanocomposite coatings for the protection of soda–lime glass", Journal of Alloys and Compounds, 2019, 774: 370–377.
5. [5] Fraga D. et al., "Developing CIGS solar cells on glass–ceramic substrates", Materials Letters, 2018, 221: 104–106.
6. [6] Shim G. et al., "Experimental and numerical evaluation of transparent bulletproof material for enhanced impact–energy absorption using strengthened–glass/polymer composite", Composites Part B: Engineering, 2016, 97: 150–161.
7. [7] Açıksarı C., Karasu B., "Akıllı camlar ve teknolojik gelişimleri", El–Cezeri Journal of Science and Engineering, 5.2: 437–457.
8. [8] Karasu B., Yanar A. O., ve Ak G., “Metalik camlar”, Şişecam Teknik Bülten, 2017, 45(231): 5–17.

9. [9] Yılmaz R., Karasu B., “Havacılık ve uzay endüstrisinde kullanılan camlar”, Şişecam Teknik Bülten, 2017, 45(231)–2: 5–14.
10. [10] http://www.asiaglass.com.tr/Sayfa/Detay/94/enkapsule-camlar (Erişim Tarihi: 22.12.2018).
11. [11] http://www.antikalar.com/beykoz-camlari-cesmibulbuller/ (Erişim Tarihi: 22.12.2018).
12. [12] https://www.google.com/search?ei=93AvXIf6BcO-aeLvisgO&q=cam+merdiven+korkuluk&oq (Erişim Tarihi: 22.12.2018).
13. [13] http://www.eczanesantral.com/optik/ (Erişim Tarihi: 22.12.2018).
14. [14] https://www.gninsaat.com.tr/buzlu-camlar-ve-telli-buzlu-camlar (Erişim Tarihi: 22.12.2018).
15. [15] Herndon G. et al., "Automotive side glazing failure due to simulated human interaction", Engineering Failure Analysis, 2007, 14.8: 1701–1710.
16. [16] Farzana R., Rajarao R., Sahajwalla V.,." Characteristics of waste automotive glasses as silica resource in ferrosilicon synthesis", Waste Management & Research, 2016, 34.2: 113–121.
17. [17] Wallenberger F. T., Bingham P. A., "Fiberglass and Glass Technology Energy–Friendly Compositions and Applications", Springer, 2010.
18. [18] https://www.donanimhaber.com/Gorilla-Glass-artik-otomobillerde--88563 (Erişim Tarihi: 22.12.2018).
19. [19] http://www.arabateknikbilgi.com/bilinmesi-gerekenler/dikiz-aynasi/ (Erişim Tarihi: 22.12.2018).
20. [20] https://www.tasit.com/araba-sozlugu/panoramik-cam-tavan-nedir (Erişim Tarihi: 22.12.2018).
21. [21] https://montanaledger.com/global-glass-fiber-in-automotive-composites-market-size-2018-cpic-johns-manville-jushi-group-lanxess-owens-corning/ (Erişim Tarihi: 22.12.2018).
22. [22] https://www.lfrt-plastic.com/news/why-car-front-end-modules-love-long-glass-fibe-11182003.html (Erişim Tarihi: 22.12.2018).
23. [23] "Glass and Glazing–A Guide to Historic Glass",. http://www.rmears.co.uk/our-publications/glass–and–glazing/ (Erişim Tarihi: 26.12.2018).
24. [24] Nascimento, M. F., "Brief history of the flat glass patent–Sixty years of the float process", World Patent Information, 2014, 38: 50–56.
25. [25] Richard S., "Glass Tips from Stained Glass Supplies", http://glasstips.blogspot.com/2008/08/float-glass.html (Erişim Tarihi: 19.12.2018).
26. [26] Anghel M., "Glass Guide", Mustang Monthly Magazine, 2016, 32–38.
27. [27] Matheson H. W., Skirrow F. W., "Vinyl ester resins and process of making same", USA Patent: 725, 362, 1927.
28. [28] Zhang X. et al., "Temperature effects on the low velocity impact response of laminated glass with different types of interlayer materials", International Journal of Impact Engineering, 2019, 124: 9–22.
29. [29] Xu J., Li Y., "Impact Behavior and Pedestrian Protection of Automotive Laminated Windshield Theories, Experiments and Numerical Simulations", Springer, 2019.
30. [30] "Indiamart", https://www.indiamart.com/proddetail/laminated-glass-11403032588.html. (Erişim Tarihi: 19.12.2018).
31. [31] Xu, J., Li, Y., "Impact Behaviour and Pedestrian Protection of Automotive Laminated Windshield", Manufacturing of Autootive Laminated Windshields, Singapore, Springer, 21–37, 2018.
32. [32] http://www.sisecamduzcam.com/tr/faaliyet-alanlarimiz/otomotiv-camlari/urunler/sisecam-lamine-camlar (Erişim Tarihi: 22.12.2018).
33. [33] https://tr.depositphotos.com/53690209/stock-photo-broken-windshield-of-car-by.html (Erişim Tarihi: 22.12.2018).
34. [34] https://tr.depositphotos.com/53690209/stock-photo-broken-windshield-of-car-by.html (Erişim Tarihi: 22.12.2018).
35. [35] Chen S. et al., "Numerical analysis of impact failure of automotive laminated glass: A review", Composites Part B: Engineering, 2017, 122: 47–60.
36. [36] Bird G., "Glass Ceilings", Interior Motives, 2007, 50–52.
37. [37] Nunez, A., "Auto Blog", https://www.autoblog.com/2006/06/16/vauxhall-astra-panoramic-lets-drivers-soak-up-the-sun/ (Erişim Tarihi: 27.12.2018).
38. [38] Gocha A., Ross A., Oney F., De Guire E., "What's in and on that car?", American Ceramic Society Bulletin, 2017, 96, 9: 10–23.
39. [39] Cleay T., Huten T., Bhatia V., Qaroush Y., Mc Farland M., "How an innovative combination of materials can enable better car windows today", American Ceramic Society Bulletin, 2017, 96, 4: 20–27.
40. [40] Xu J., Li,Y. B., Chen X., Ge D. Y., Liu B. H., Zhu M. Y., Park T. H., , "Automotive windshield–pedestrian head impact: Energy absorption capability of interlayer material", International Journal of Automotive Technology, 2011, 12, 5: 687–695.
41. [41] Erdem I. Guldiren D., Aydın S., "Chemical tempering of soda lime silicate glasses by ion exchange process for the improvement of surface and bulk mechanical strength", Journal of Non–Crystalline Solids, 2017, 473: 170–178.
42. [42] He J. Q. et al., "Study on force distribution of the tempered glass based on laser interference technology", Optik–International Journal for Light and Electron Optics, 2015, 126.24: 5276–5279.
43. [43] Akçay M., “Oto cam temperleme işleminde farklı ısıtma ve soğutma sıcaklıkları için optimum akış karakteristiklerinin ve temper kalitesinin belirlenmesi”, Doktora Tezi, Karabük Üniversitesi Fen Bilimleri Enstitüsü, 2014.
44. [44] http://etiglass.com/tr/resimler/6/temperli-cam (Erişim Tarihi: 22.12.2018).
45. [45] Tandon R., Glass S. J., "Fracture initiation and fragmentation in chemically tempered glass", Journal of the European Ceramic Society, 2015, 35.1: 285–295.
46. [46] Wurm J., “Glass Structures Design and Construction of Self-Supporting Skins”, Birkhauser Verlag, 2007.
47. [47] "Destin Glass, http://destinglass.com/tempered-safety-glass/. (Erişim Tarihi: 19.12.2018).
48. [48] Monnoyer F., Lochegnies D., "Heat transfer and flow characteristics of the cooling system of an industrial glass tempering unit", Applied Thermal Engineering, 2008, 28, 17–18: 2167–2177.
49. [49] Fam A., Rızkalla S., "Structural performance of laminated and unlaminated tempered glass under monotonic transverse loading", Construction and Building Materials, 2006, 20.9: 761–768.
50. [50] http://www.bycunited.com/is-l-cam-temperleme.html (Erişim Tarihi: 22.12.2018).
51. [51] Li X. et al., "Correlation between K+–Na+ diffusion coefficient and flexural strength of chemically tempered aluminosilicate glass", Journal of Non–Crystalline Solids, 2017, 471: 72–81.
52. [52] http://www.bycunited.com/kimyasal-cam-temperleme.html (Erişim Tarihi: 22.12.2018).
53. [53] Kaçar U., "Otomotiv Camlarının Temperlenmesi ve Şekillendirilmesi", Yüksek Lisans Tezi, Namık Kemal Üniversitesi, Fen Bilimleri Enstitüsü, 2008.
54. [54] "Uniform provisions concerning the approval of safety glazing materials", United Nations, UN European Economic Council, Addendum 42: Regulation No. 43, 2012.
55. [55] Yoneda T., Yasuhiro S, Morimoto T., "Sol–Gel Coatings Applied to Automotive Windows", Handbook of Sol–Gel Science and Technology, Springer International Publishing AG, 2239–2253, 2018.
56. [56] Morgan J. F., Blanco M., "Sythesis study of light vehicle non–planar mirror research", USA, Department of National Highway Traffic Security, 2010.
57. [57] Chang C. W., Sun H. Y., Horng C. T., Lee C. H., Huang S. Y., "Progressive rear–view mirror for motorcycles", Optics Express, 2016, 24: 29283–29294.
58. [58] Birleşmiş Milletler Avrupa Ekonomik Konseyi, "Uniform provisions concerning the approval of devices for indirect vision and of motor vehicles with regard to the installation of these devices", United Nations, UN European Economic Council, 2010, http://www.unece.org/trans/main/wp29/wp29wgs/wp29gen/wp29fdocstts.html.
59. [59] Heusing S., Aegerter M. A., "Sol–Gel Coatings for Electrochromic Devices", Handbook of Sol–Gel Science and Technology, Springer, 2745–2792, 2018.
60. [60] Hermann D. S., "Automotive displays–trends, opportunities and challenges", 25th International Workshop on Active–Matrix Flatpanel Displays and Devices (AM–FPD), Kyoto, 2018.
61. [61] Wördenweber B., Wallaschek J., Boyce P., Hoffman D. D., "Automotive Lighting–State of the Art", Automotive Lighting and Human Vision, Springer–Verlag Berlin Heidelberg, 95–261, 2007.
62. [62] Robert Bosch GmbH, "Electrical and Electronic Systems in the Vehicle", Bosch Professional Automotive Information, Wiesbaden, Springer Vieweg, 10–69, 2014.
63. [63] Sanjay M. R., Arpitha G. R., Yogesha B., "Study on mechanical properties of natural–glass fibre reinforced polymer hybrid composites: A review", Materials Today: Proceedings, 2015, 2, 4–5: 2959–2967.
64. [64] Launay A. et al., "Modelling the influence of temperature and relative humidity on the time–dependent mechanical behaviour of a short glass fibre reinforced polyamide", Mechanics of Materials, 2013, 56: 1–10.
65. [65] Malpot A., Touchard F., Bergamo S., "Effect of relative humidity on mechanical properties of a woven thermoplastic composite for automotive application", Polymer Testing, 2015, 48: 160–168.
66. [66] Brown K. A., Brooks R., Warrior N. A., "The static and high strain rate behaviour of a commingled E–glass/polypropylene woven fabric composite", Composites Science and Technology, 2010, 70.2: 272–283.
67. [67] Nikforooz M. et al., "Processability and tensile performance of continuous glass fiber/polyamide laminates for structural load–bearing applications", Composites Part A: Applied Science and Manufacturing, 2018, 105: 156–164.
68. [68] Gratzl T. et al., "Influence of the automotive paint shop on mechanical properties of continuous fibre–reinforced thermoplastics", Composite Structures, 2019, 208: 557–565.
69. [69] Teixeira D. et al., "Influence of flow restriction on the microstructure and mechanical properties of long glass fiber–reinforced polyamide 6.6 composites for automotive applications", Materials & Design, 2013, 47: 287–294.
70. [70] Esnaola A. et al., "Quasi–static crush energy absorption capability of E–glass/polyester and hybrid E–glass–basalt/polyester composite structures", Materials & Design, 2015, 76: 18–25.
71. [71] Deloglu M. et al., "Environmental and economic life cycle assessment of a lightweight solution for an automotive component: A comparison between talc–filled and hollow glass microspheres–reinforced polymer composites", Journal of cleaner production, 2016, 139: 548–560.
72. [72] Zhai Z., Jiang B., Drummer D., "Strain rate–dependent mechanical behavior of quasi–unidirectional E–glass fabric reinforced polypropylene composites under off–axis tensile loading", Polymer Testing, 2018, 69: 276–285.
73. [73] Esnaola A. et al., "Effect of fibre volume fraction on energy absorption capabilities of E–glass/polyester automotive crash structures", Composites Part B: Engineering, 2016, 85: 1–7.
74. [74] H. Lee, M. Huh, S. Kang, and S. Il Yun, “Compressive behavior of automotive side impact beam with continuous glass fiber reinforced thermoplastics incorporating long fiber thermoplastics ribs,” Fibers Polym., 2017, 18, 8: 1609–1613.
75. [75] Sureshkumar M. et al., "Design, fabrication, and analysis of a hybrid fiber composite monoleaf spring using carbon and E–glass fibers for automotive suspension applications", Mechanics of Composite Materials, 2014, 50, 1: 115–122.
76. [76] Lagel M. C. et al., "Automotive brake pads made with a bioresin matrix", Industrial Crops and Products, 2016, 85: 372–381.
77. [77] Park S. W., Choi J. H., Lee B. C., "Multi–objective optimization of an automotive body component with fiber–reinforced composites", Structural and Multidisciplinary Optimization, 2018, 58: 2203–2217.
78. [78] Esnaola A. et al., "Design, manufacturing and evaluation of glass/polyester composite crash structures for lightweight vehicles", International Journal of Automotive Technology, 2016, 17.6: 1013–1022.
79. [79] Friedrich K., Almajid A. A., "Manufacturing aspects of advanced polymer composites for automotive applications", Applied Composite Materials, 2013, 20: 107–128.
80. [80] Ayrılmıs N. et al., "Coir fiber reinforced polypropylene composite panel for automotive interior applications", Fibers and Polymers, 2011, 12, 7: 919.
81. [81] Haffelin D. et al., "Series production of fiber composite safety components for the automotive industry", Lightweight Design Worldwide, 2018, 11, 6: 46–51.
82. [82] Pickerill K., "Disk Brake Construction", Classroom Manual for Automotive Brake Systems, Cengage Learning, 163, 2014.
83. [83] Davis M. J., Vullo P., Kocher M., Hovhannisyan M., Letz M., "Piezoelectric glass–ceramic for high–temperature applications", Journal of Non–Crystalline Solids, 2018, 501: 159–166.
84. [84] Endoh H., "Separators for automotive lead/acid batteries: selection of suitable types for different climate zones", Journal of Power Sources, 1996, 59: 51–55.
85. [85] Kramm U. I., Bogdanoff P., Fiechter S., "Polymer Electrolyte Membrane Fuel Cells (PEM–FC) and Non–noble Metal Catalysts for Oxygen Reduction", Fuel Cells, New York, Springer, 519–575, 2013.
86. [86] Kamitani K., Teranishi T., "Development of water–repellent glass improved water–sliding property and durability", Journal of Sol–Gel Science and Technology, 2003, 26, 823–825.
87. [87] Nagashima S., Moon M., "Diamond–Like Carbon Coatings with Special Wettability for Automotive Applications", Coating Technology for Vehicle Applications, Springer, 191–202, 2015.
88. [88] Taga Y., "Recent progress in coating technology for surface modification automotive glass", Journal of Non–Crystalline Solids, 1997, 218: 335–341.
89. [89] Lee W. C., Choi E. C., Boo J. H., Hong B., "A study on characterization of nano–porous NiO thin film to improve electrical and optical properties for application to automotive glass", Thin Solid Films, 2017, 641, 28–33.
90. [90] Guillevic E., Zhang X., Pain T., Calvez L., Adam J., Lucas J., Guilloux–Viry M., Ollivier S., Gadret G., "Optimization of chalcogenide glass in the As–Se–S system for automotive applications", Optical Materials, 2009, 31: 1688–1692.
91. [91] Ma C., Cao Y., Shen X., Wen Z., Ma R., Long J., Yuan X., "High reliable and chromaticity–tunable flip–chip W–LEDs with Ce:YAG glass–ceramics phosphor for long–lifetime automotive headlights applications", Optical Materials, 2017, 69: 105–114.
92. [92] Kalebek N. A., "Flammability behaviour of epoxy composite flets reinforced with recycled E–glass/cotton for automotive applications", Fibers and Polymers, 2017, 18, 1: 172–181.
93. [93] Zhang J., Chaisombat K., He S., Wang C. H., "Glass/Carbon Fibre Hybrid Composite Laminates for Structural Applications in Automotive Vehicles", Sustainable Automotive Technologies, Melbourne, 2012.
94. [94] Esnaola A., Tena I., Aurrekoetxea J., Gallego I., Ulacia I., "Effect of fibre volume fraction on energy absorption capabilities of E–glass/polyester automotive crash structures", Composites Part B,2016, 85: 1–7.
95. [95] Khan M. A., Syed A. K., Ijaz H., Shah R. B., "Experimental and numerical analysis of flexural and impact behaviour of glass/pp sadwich panel for automotive structural applications", Advanced Composite Materials, 2018, 27, 4: 367–386.